Establishment of a color tolerance for yarn-dyed fabrics from different color-depth yarns

Yarn-dyed fabric is often woven from warp and weft yarns in the same color depth to ensure a uniform color appearance. The difference in color depth between warp and weft tends to result in the uneven color of the yarn-dyed fabric. This article aims to establish a color tolerance for yarn-dyed fabric that can be woven with a qualified color appearance but from the warp and weft yarns in different color depths. A total of 27 yarn-dyed fabric samples in three color series (red, yellow, and blue) were evaluated by using the yarn-dyed fabric from warp and weft yarns in the same color depth of 2% (on weight of fabric, owf) as the standard. Visual assessment and instrumental measurement of color were carried out to establish the color tolerance ellipse that was defined as CMC (Color Measurement Committee) color differences (2:1) of no more than 1.00. It was found that the color strengths (K/S) and color differences (ΔE_CMC(2:1)) of these fabric samples for each color series had linear relationships with the color depths of warp and weft yarns. The color tolerance ellipses indicated that, even though the warp and weft yarns had an apparent color difference, they could be woven in fabrics with relatively uniform color appearance and meet the requirements for yarn-dyed fabric. This work provided valuable insight into the production of qualified yarn-dyed fabrics from unqualified dyed yarns.     

Mixing enhancement mechanism of combined H2–Water jets in supersonic crossflows in a combustor with an expanded section

To obtain the mixing enhancement mechanism of H₂–Water combined jets in supersonic crossflows in a combustor with expanded section for rotating detonation ramjet, the flow field shape and spray structure were studied by experimental and numerical methods. The Eulerian–Lagrangian method was used to investigate the diffusion mechanism and H₂–Water interaction law of combined jets with different sequences. At the same time, high-speed photography and the schlieren technique were used to capture the flow field. The effects of jet pressure drop, orifice diameter, orifice spacing, incoming Mach number, and other parameters on the penetration depth of water jets were studied. The results of experiment and simulation show that using H₂–Water combined jets, the penetration depth of the jet spray can be greatly increased and the jet mixing effect can be significantly improved, which will contribute to the engine's ignition and stable combustion. In the case of pre-water/post-H₂, the penetration depth of the hydrogen jet is greater. In the case of pre-H₂/post-water, the hydrogen jet raises the water spray mainly by protecting the integrity of the water column.     

Effect of heat transfer through the release pipe on simulations of cryogenic hydrogen jet fires and hazard distances

Jet flames originated by cryo-compressed ignited hydrogen releases can cause life-threatening conditions in their surroundings. Validated models are needed to accurately predict thermal hazards from a jet fire. Numerical simulations of cryogenic hydrogen flow in the release pipe are performed to assess the effect of heat transfer through the pipe walls on jet parameters. Notional nozzle exit diameter is calculated based on the simulated real nozzle parameters and used in CFD simulations as a boundary condition to model jet fires. The CFD model was previously validated against experiments with vertical cryogenic hydrogen jet fires with release pressures up to 0.5 MPa (abs), release diameter 1.25 mm and temperatures as low as 50 K. This study validates the CFD model in a wider domain of experimental release conditions - horizontal cryogenic jets at exhaust pipe temperature 80 K, pressure up to 2 MPa ab and release diameters up to 4 mm. Simulation results are compared against such experimentally measured parameters as hydrogen mass flow rate, flame length and radiative heat flux at different locations from the jet fire. The CFD model reproduces experiments with reasonable for engineering applications accuracy. Jet fire hazard distances established using three different criteria - temperature, thermal radiation and thermal dose - are compared and discussed based on CFD simulation results.     

Corrosion resistance of Al–Cr-slag containing chromium–corundum refractories to slags with different basicity

Al–Cr slag is the solid waste generated by the smelting of Cr metal. It presents a range of environmental hazards. This study addressed the corrosion resistance of Al–Cr slag containing chromium–corundum refractories to slags with different basicity. Herein, we provide suggestions for the use of Cr–corundum of different basicity in kilns. Al–Cr slag, brown fused Al₂O₃, and chrome green were used as the raw materials, with pure calcium aluminate cement being used as a binder. The brick samples, prepared using different blends of chrome green and corundum, were fired at 1600?°C, and subsequently subjected to a slag corrosion test. After corrosion by slag of different basicity, the phase composition and microstructure of the sample were analyzed by X-ray diffraction, energy dispersive spectrometer and scanning electron microscopy. There were two major findings. First, Cr–corundum brick made from Al–Cr slag has a better slag corrosion resistance than that made from Cr₂O₃ and brown fused Al₂O₃. Second, Cr–corundum brick made from Al–Cr slag has superior corrosion resistance to slag with a CaO:SiO₂ ratio of 2:1.     

新一代深度张力面板

新一代深度张力面板不仅具有基本的深度、张力采集、处理、显示功能,同时还具有多种报警及通讯功能.其最大的特点是采用了液晶显示屏和触摸屏,使得信息的显示更加丰富、直观和醒目.同时,触摸屏的采用,省去了传统的按钮、开关及键盘操作模式,使操作更加方便简洁、自然.该面板可以单独工作,也可以配备于测井、录井地面系统中使用.     

覆盖层厚度对巷道周围应力分布的影响及巷道间相互作用的仿真

给出了覆盖层厚度对巷道周围应力分布的影响及巷道间相互作用的计算机仿真，用三维有限元法分析了在不同覆盖层厚度下巷道周围的应力分布和两个巷道之间不同距离下的相互作用。数值模拟表明了巷道周围应力分布和应力集中系数随覆盖层厚度增加的变化规律，找到了两巷道之间的距离的临界值，当两巷道间距离大于该临界值时，它们之间的相互作用消失。     

一种软件实现虚拟景深的方法

影视后期制作或图像合成中，动态实时改变显示画面的景深能进一步增强画面的真实感，但由于实时性要求较高，软件实现在处理速度方面容易产生瓶颈。为此，采用预处理的办法，分别对前景和背景进行低通滤波，得到前、背景各自的模拟帧序列，通过调节前景和背景帧序列的位置，模拟确定其各自的变焦程度，然后将前景和背景动态合成具有虚拟景深效果的画面。     

射孔孔眼中散射超声脉冲波的FEM模拟

采用有限元素法 ,分别数值计算了平底孔道、台阶式孔道和尖劈状孔道等 3种孔眼模型中不同中心频率 (10 0 k Hz、5 0 0 k Hz、1MHz)的散射超声脉冲波。计算结果表明 ,无论选用哪一种孔底模型 ,均可以得到较为明显的对应于孔底的声波信号。但是 ,孔道越不规则 ,使用的超声信号的主频越高 ,则孔底信号越差。为了兼顾孔底信号质量和信号采集、传输的代价 ,在未来的检测仪器中应采用尽可能低的测量频率 (低于 5 0 0 k Hz)     

三维叠前深度偏移处理技巧与应用

结合研究区的地质资料，着重就研究区的速度深度模型的人工控制进行了研究；基于研究区断裂系统复杂，为了解所用处理方法对复杂构造的适用性，设计了2个模型来检验叠前深度偏移效果的有效性；与时间偏移相比，叠前深度偏移高质量地解决了复杂断块区的成像问题。     

The role of occlusion in the perception of depth, lightness, and opacity.

A theory is presented that explains how the visual system infers the lightness, opacity, and depth of surfaces from stereoscopic images. It is shown that the polarity and magnitude of image contrast play distinct roles in surface perception, which can be captured by 2 principles of perceptual inference. First, a contrast depth asymmetry principle articulates how the visual system computes the ordinal depth and lightness relationships from the polarity of local, binocularly matched image contrast. Second, a global transmittance anchoring principle expresses how variations in contrast magnitudes are used to infer the presence of transparent surfaces. It is argued that these principles provide a unified explanation of how the visual system computes the 3-D surface structure of opaque and transparent surfaces. (PsycINFO Database Record (c) 2010 APA, all rights reserved)