本地七号公共信令网实施的若干问题

本文主要讨论本地七号公共信令网实施的若干问题，如信令转发点的设置，链路设置和路由选择，话路网和信令网的关系，不同制式七号公共信令的互通问题等。     

历史中心区复兴中的地域性问题与对策

本文以上海思南路47～48街坊改造为例,探讨城市形态更新与居民外迁问题,并期待相关地域性社会对策的出现。     

美孚油回收利用的可行性实验研究

本文针对美孚油回收液与兰炼8#油混合利用进行可行性实验研究，经过重度、粘度、可燃性等方面的实验研究，表明美孚油回收液与兰炼8#油混合可以用在电动轮上并且获得良好的效果。     

分散网络制造浅谈

网络社会的制造业将是一个全球化的分散型的制造体系.分散网络制造是基于互联网的制造活动,因此,它具开放的、虚拟的,以及资源和技术更合理配置的特点.其组织模式是多种多样的,按现今国防工业现状,宜采用项目领导小组统一协调和控制下的分阶段动态联盟更为合适.为此,分析了网络无序化、企业属性知识不足、利益分配不易等问题带来的困难,并提出了一些建议.     

Development of correlation between potassium hydroxide number and conductivity of concentrated natural rubber latex

Increase in the ion concentration in the medium was found to increase conductivity and potassium hydroxide number (KOH No) in natural rubber latex (NRL). Addition of long chain fatty acids can increase the ion concentration in the medium and stability of NRL. A series of concentrated natural rubber latex samples from three different areas with different soils and climatic conditions were tested for the parameters such as KOH No and conductivity. They have been measured over a period of 62 days, upon addition of soap to natural rubber latex concentrate. The result showed that there was a strong positive linear correlation between conductivity and KOH No. The regression equation to express the relationship between the variables has also been found. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2008     

东海西湖凹陷探井钻井完井液技术

介绍了东海西湖凹陷的储层特征。在分析探井储层损害原因的基础上，提出了优化的海水钻井完井液体系。两口井应用表明，储层保护效果明显。     

应用ATV71变频器有效解决给粉机变频器低电压跳闸问题

本文分析了给粉机变频器低电压跳闸的原因和解决办法，为解决给粉机变频器低电压跳闸，消除设备隐患提供了经验。     

用于数控设备的弹性环联轴器

介绍了一种适用于数控设备改造的无键联轴器，从其原理、设计、加工各方面作了阐述，并且总结了许 多实际应用经验和适用参数。     

黑方台焦家4号黄土滑坡发育特征及滑动机理

20世纪60年代以来,大量的灌溉系统在黄土地区建设运营,解决了农业的干旱问题,但同时灌溉也诱发了大量的滑坡。其中,2015年1月28日20:00,甘肃省永靖县焦家村发生了一起中等规模的黄土滑坡,滑坡严重影响其下方309国道线和六盘峡水库的安全。采用对裂缝分布、水文地质的调查,结合低空摄影测量、精细工程地质测绘、室内三轴试验等研究方法,对焦家4号滑坡的基本特征进行了分析,对形成滑坡的成灾机理有了初步认识。结果表明:(1)滑坡发生前,后缘裂缝有明显的变形情况;(2)滑坡滑动距离为548.3 m,体积为15.35万m~3,面积为6.6万m~2;(3)饱和黄土应力应变模式表现为强烈的应变软化剪缩型,并具有一定的静态液化特性;(4)滑坡是饱和黄土层静态液化引起的。     

Early age microstructure of Portland cement mortar investigated by ultrasonic shear waves and numerical simulation

This paper investigates the ability of a shear wave reflection (WR) method to monitor microstructural changes of Portland cement mortar during hydration. The wave reflection method measures the reflection loss of shear waves at an interface between a steel plate and mortar. Mortars with water/cement ratios of 0.35, 0.5 and 0.6 were tested at isothermal curing conditions of 25 °C. The numerical model HYMOSTRUC3D was used to simulate the evolution of microstructural properties of the cement paste phase of the tested mortars. The parameters obtained from the simulations were the volume fraction of the total and connected solid phase and the specific contact area of the hydrated cement particles. The investigations have shown that the wave reflection measurements are governed primarily by the degree of the inter-particle bonding of the cement particles as calculated from the specific contact area of a simulated microstructure.