WAVE INTERACTION WITH PERFORATED CAISSON BREAKWATERS

The reflection coefficient of perforated caissons and the total horizontal forces acting on them were experimentally and numerically analyzed and discussed when wave propagates normally. To consider the viscosity effect of fluid and nonlinear action of waves on structures, the VOF (Volume Of Fluid) method combined with the k-ε turbulence model was used to simulate the interaction between waves and structures. Governing equations were solved with the finite difference method. Through 2D experimental study in the wave flume, the empirical relationship between the reflection coefficient of perforated caissons and the main affecting factors were obtained from the experimental data using the least square method. Also the correlation between the ratio of the total horizontal force acting on perforated caisson and the force acting on solid caisson and the main affecting factors were regressed from the experimental data.     

EXPERIMENTAL AND NUMERICAL INVESTIGATIONS ON HORIZONTAL OIL-GAS FLOW

Experiments were carried out to investigate the characteristics of oil-gas flow in a horizontal pipe on a large scale (with the inner diameter D = 125 mm). With the experimental data, the flow patterns were presented. Through the analyses for the flow regime transition, it was found that there was a critical superficial velocity of liquid phase for the flow regime transiting from stratified flow to slug flow. The slug flow could not occur until the superficial velocity of liquid phase was higher than the critical velocity. For the flow pattern transiting from stratified to slug flow, the transmitting velocity of gas phase decreases with the augmentation of superficial velocity of liquid phase. On the basis of the experiments, numerical simulations of different flow patterns and their transitions were performed with the use of the Volume Of Fluid (VOF) technique. The results of the computations are shown to match well with the measured data in the experiments.     

BFG的热值及温度与0号机出力和效率的关系

分析煤气温度、干煤气热值和湿煤气热值之间的关系，得到0号机组长期达不到额定出力和效率的原因，在此基础上提出解决问题的方法。     

Surface Hardening of High-Strength Low Alloy Steels (HSLA) Dual-Phase Steels by Ball Burnishing Using Factorial Design

Burnishing is used increasingly as a finishing operation which gives additional advantages such as increased hardness, fatigue strength, and wear resistance. Experimental work based on 3⁴ factorial design was carried out to establish the effects of ball burnishing parameters on the surface hardness of high-strength low alloy steels (HSLA) dual-phase (DP) steel specimens. Statistical analysis of the results shows that the speed, feed, lubricant and ball diameter have significant effect on surface hardness.     

Adaptive generation of surfaces in volume data

A widespread approach to generating polygonal approximations of iso-surfaces or contour surfaces in volume data is the socalled marching-cubes algorithm. This algorithm, however, has the disadvantage that the number of polygonal chains generated is considerable. The splitting-box algorithm presented here reduces the number of polygonal chains by adapting their size to the shape of the surface. The resulting polygonal chains offer a wide spectrum for representing the contour surface. An exact representation is achieved by a new type of generic patches calculated from the polygonal chains. Approximations of different quality may be obtained by combining the algorithm generating the patches with simple triangulations.     

��Ȼ��ѹ�����ӵļ������������

对三种天然气压缩因子计算方法：经典热力学法、SGERG-88法、SY／T6143—1996法进行了介绍并对计算结果进行了对比，第一种方法的计算精度远不能满足贸易结算的要求，我国现行的第二种计算方法与ISO标准方法相比，在10℃以上的温度范围内基本相符，但在10℃以下的低温段则偏差较大。由此说明，我国目前所实施的计量标准与国际上认可的ISO标准方法之间有较大的偏差；同时，对不需要在线计算的场合，提出了一套基于数据拟合的计算体积修正系数的高精度近似方法，可提高体积计量仪表的性价比。     

光折变晶体Cu:KNSBN的多重图像存贮实验研究

目前,光折变非线性元件在光学并行图像处理中有着非常广泛的应用。光折变晶体用于图像边缘增强,图像加、减运算,非相干—相干转换(PICOC),图像相关和卷积运算等研究已取得显著成果。本文研究了Cu;KNSBN晶体中多重图像的存贮问题,指出可以利用这种技术实现光学目标识别并给出了一些初步实验结果。此外,还从理论上分析了具有相同衍射效率的多重全息信息记录技术。     

MC算法在医学图像三维重建中的应用

详细介绍了MC算法,提出了优化网格模型简化算法。优化网格模型简化算法选取坐标点的原则是,尽可能地接近原始网格,通常采用子集选择法或优化选择法。在尽可能保证图像精度的前提下,优化网格模型简化算法可以提高运算速度,而单纯的网格算法由于失真严重而缺乏实用价值。基于体绘制的网格化简化算法重建的三维模型比较完全,且算法简单,在多排螺旋CT等医学图像三维重建中有较好的应用。     

Kinetics of volume expansion during infusion of Ringer’s solution based on two volume model

In this work mathematical models were developed to represent the kinetics of volume changes of fluid spaces associated with infusion of Ringer’s solution. During infusion of Ringer’s solution, the human body is assumed to be characterized by the two-fluid space model which has second volume space in addition to the first volume so that fluid exchanges between these two spaces are possible. Various infusion types were tested to accommodate different medical situations. Volunteers were given Ringer’s solution and the changes in blood hemoglobin were detected. From the comparison with experimental data, the two-fluid space model was found to represent adequately the kinetics of human volume expansion during infusion of Ringer’s solution.     

Improving cache locality for GPU-based volume rendering

We present a cache-aware method for accelerating texture-based volume rendering on a graphics processing unit (GPU). Because a GPU has hierarchical architecture in terms of processing and memory units, cache optimization is important to maximize performance for memory-intensive applications. Our method localizes texture memory reference according to the location of the viewpoint and dynamically selects the width and height of thread blocks (TBs) so that each warp, which is a series of 32 threads processed simultaneously, can minimize memory access strides. We also incorporate transposed indexing of threads to perform TB-level cache optimization for specific viewpoints. Furthermore, we maximize TB size to exploit spatial locality with fewer resident TBs. For viewpoints with relatively large strides, we synchronize threads of the same TB at regular intervals to realize synchronous ray propagation. Experimental results indicate that our cache-aware method doubles the worst rendering performance compared to those provided by the CUDA and OpenCL software development kits.