液压胀形轧辊油槽深度的确定

对液压胀形轧辊（即国外的ＶＣ轧辊）辊套热装后的弹性变形进行了有限元分析，给出了确定油槽最小深度的计算公式。本文的有限元计算结果与实验结果吻合，某些结论可为液压胀形轧辊的结构设计提供理论依据。     

Parametric study of the electrical to thermal power conversion in an inductively coupledrf plasma torch

An inductively coupled (ic) radio-frequency (rf) stabilized argon plasma was generated in a quartz tube using a 7 MHzrf generator. The electrical and thermal powers were measured and the efficiency of energy conversion was computed. The results indicate that for a constant power input, there is an optimum argon flow rate for which maximum energy conversion efficiency occurs.     

产品艺术形式的深度创新

文章对产品设计艺术形式的深度创新进行了分析与探索。选取家电、家居产品、五金产品、交通产品、数码电子产品中典型的中外设计案例,结合比较学的方法对优秀产品的深层创新与其它产品中的浅层创新做了比较分析。论述了产品设计中艺术形式创新应包含的本质内容。艺术形式深度创新的本质包括：为解决平凡生活中的某个问题而设计的形式;作为新技术的先导而设计的形式。研究的结论对减少资源浪费,提高人的生活质量,正确引导未来的设计走向具有重要意义。     

On the Survivability of Self-repairing Control System for a Hybrid Underwater Vehicle

A hybrid remotely operated underwater vehicle （HROV） capable of working to the full ocean depth has been developed. In order for the vehicle to achieve a certain survivability level, a self-repairing control system （SRCS） has been designed. It consists of two basic technologies, fault diagnosis and isolation （FDI） and reconfigurable control. For F＇DI, a model-based hierarchical fault diagnosis system is designed for the HROV. Then, control strategies which reconfigure the control system at intervals according to information from the FDI system are presented. Combining the two technologies, it can obtain the fundamental frame of SRCS for the HROV. Considering the hazardous underwater environment at the limiting depth and the hybrid operating modes, an assessment of the HROV＇ s survivability is vitally needed before it enters operational service. This paper presents a new definition of survivability for underwater vehicles and develops a simple survivability model for the SRCS. As a result of survivability assessment for the SRCS, we are able to figure out the survivability of SRCS and make further optimization about it. The methodology developed herein is also applicable to other types of underwater vehicles.     

Oxidation behavior of 2.25Cr-1Mo steel with prior tempering at different temperatures

The oxidation behavior of a normalized 2.25Cr-1Mo steel tempered previously for 10 hr at different temperatures between 873 and 1023 K has been studied up to a maximum duration of 1000 hr in air at 773–973 K. The oxidation resistance of the steel was found to decrease significantly with the temperature of tempering. Tempering of this steel is reported to cause microstructural changes involving precipitation of Cr as carbides and a decrease in the effective (free) Cr contents, that could influence the oxidation resistance of the Cr-containing alloys. Relative compositions across the thickness of the oxide scales, as analyzed by SEM/EDX and SIMS, suggest that a less Cr-rich (and less protective) and thicker scale on the steel formed because previous tempering caused extensive depletion of free Cr.     

硬质合金磨削温度的实验研究

采用半人工和人工热电偶法，对硬质合金YG6和YT30平面磨削的磨削温度进行了实验研究。并对磨削参数与磨削温度的关系，进行了理论分析及实验验证。结果表明：磨削深度和工作台速度增加，磨削温度升高，但工作台速度的改变，对磨削温度的影响较小．     

考虑桩顶水平反力的水平受荷单桩弹塑性解析解

基于线性地基反力法和土体的弹塑性本构关系,对桩顶水平反力系数不为零时的水平受荷桩进行了研究,给出了桩顶土屈服临界荷载（水平力、弯矩）的耦合关系式。研究结果表明,当荷载大于临界荷载时,桩顶土发生塑性屈服,其塑性屈服深度随荷载的增加而增加,但其塑性区扩展速率随桩顶荷载的增加而逐渐减小。给出了弹性区与塑性区桩内力耦合的矩阵方程及其迭代求解格式;利用曲面拟合软件给出了塑性区换算深的计算公式。通过工程算例验证,证明该方法可靠快捷,便于手算,值得推广。      

A novel three-tiered visualization approach for firewall rule validation

Firewall is one of the most critical elements of the current Internet, which can protect the entire network against attacks and threats. While configuring the firewalls, rule configuration has to conform to, or say be consistent with, the demands of the network security policies such that the network security would not be flawed. For the security consistency, firewall rule editing, ordering, and distribution must be done very carefully on each of the cooperative firewalls, especially in a large-scale and multifirewall-equipped network. Nevertheless, a network operator is prone to incorrectly configure the firewalls because there are typically thousands or hundreds of filtering/admission rules (i.e., rules in the Access Control List file, or ACL for short), which could be set up in a firewall; not mentioning these rules among firewalls affect mutually and can make the matter worse. Under this situation, the network operator would hardly know his/her misconfiguration until the network functions beyond the expectation. For this reason, our work is to build a visualized validation system for facilitating the check of security consistency between the rule configuration of firewalls and the demands of network security policies. To do so, the developed validation system utilizes a three-tiered visualization hierarchy along with different compound viewpoints to provide users with a complete picture of firewalls and relationships among them for error debugging and anomaly removal. In addition, in this paper, we also enumerate the source of security inconsistency while setting ACLs and make use of it as a basis of the design of our visualization model. Currently, part of the firewall configuration of our campus network has been used as our system's input to demonstrate our system's implementation.     

Computing multiple-output regression quantile regions

A procedure relying on linear programming techniques is developed to compute (regression) quantile regions that have been defined recently. In the location case, this procedure allows for computing halfspace depth regions even beyond dimension two. The corresponding algorithm is described in detail, and illustrations are provided both for simulated and real data. The efficiency of a Matlab implementation of the algorithm¹ is also investigated through extensive simulations.