Prediction of rock mass P wave velocity using blasthole drilling information

In this paper, the development of the models for the prediction of rock mass P wave velocity is presented. For model development, the database of 53 cases including widely used and recorded drilling parameters and P wave velocity was constructed from the field studies conducted in 13 open pit lignite mines. Both conventional linear, non-linear multiple regression and Adaptive Neuro Fuzzy Inference System (ANFIS) were used for model development. Prediction performance indicators showed that ANFIS model presented the best performance and it can successfully be used for the preliminary prediction of P wave velocities of rock masses.     

Estimation of elastic constant of rocks using an ANFIS approach

The engineering properties of the rocks have the most vital role in planning of rock excavation and construction for optimum utilization of earth resources with greater safety and least damage to surroundings. The design and construction of structure is influenced by physico-mechanical properties of rock mass. Young's modulus provides insight about the magnitude and characteristic of the rock mass deformation due to change in stress field. The determination of the Young's modulus in laboratory is very time consuming and costly. Therefore, basic rock properties like point load, density and water absorption have been used to predict the Young's modulus. Point load, density and water absorption can be easily determined in field as well as laboratory and are pertinent properties to characterize a rock mass. The artificial neural network (ANN), fuzzy inference system (FIS) and neuro fuzzy are promising techniques which have proven to be very reliable in recent years. In, present study, neuro fuzzy system is applied to predict the rock Young's modulus to overcome the limitation of ANN and fuzzy logic. Total 85 dataset were used for training the network and 10 dataset for testing and validation of network rules. The network performance indices correlation coefficient, mean absolute percentage error (MAPE), root mean square error (RMSE), and variance account for (VAF) are found to be 0.6643, 7.583, 6.799, and 91.95 respectively, which endow with high performance of predictive neuro-fuzzy system to make use for prediction of complex rock parameter.     

低温裂纹张开位移预测方法的讨论

把低温影响下的COD试验数据用灰色理论中的累加方法进行累加，可以使一组没有规律的数据成为一条光滑的曲线．然后利用人工神经网络和自适应模糊推理系统两种方法进行预测，算例的结果表明用一次累加后的数列预测精度较高。     

使用新混合模糊聚类算法的模糊系统建模方法

为了进一步提高模糊系统建立模型的精度,提出一种新的模糊系统算法ANFIS-HC-QPSO：采用一种混合型模糊聚类算法来对模糊系统的输入空间进行划分,每一个聚类通过高斯函数的拟合产生一个隶属度函数,即完成ANFIS系统的前件参数--隶属度函数参数的初始识别,通过具有量子行为的粒子群算法QPSO与最小二乘法优化前件参数,直至达到停机条件,最终得到ANFIS的前件及后件参数,从而得到满意的模糊系统模型。实验表明,AN-FIS-HC-QPSO算法与传统算法相比,能在只需较少模糊规则的前提下就使模糊系统达到更高的精度。     

Monitoring of tool wear using measured machining forces and neuro-fuzzy modelling approaches during machining of GFRP composites

The challenges of machining, particularly milling, glass fibre-reinforced polymer (GFRP) composites are their abrasiveness (which lead to excessive tool wear) and susceptible to workpiece damage when improper machining parameters are used. It is imperative that the condition of cutting tool being monitored during the machining process of GFRP composites so as to re-compensating the effect of tool wear on the machined components. Until recently, empirical data on tool wear monitoring of this material during end milling process is still limited in existing literature. Thus, this paper presents the development and evaluation of tool condition monitoring technique using measured machining force data and Adaptive Network-Based Fuzzy Inference Systems during end milling of the GFRP composites. The proposed modelling approaches employ two different data partitioning techniques in improving the predictability of machinability response. Results show that superior predictability of tool wear was observed when using feed force data for both data partitioning techniques. In particular, the ANFIS models were able to match the nonlinear relationship of tool wear and feed force highly effective compared to that of the simple power law of regression trend. This was confirmed through two statistical indices, namely r² and root mean square error (RMSE), performed on training as well as checking datasets.     

Adaptive neuro-fuzzy inference system multi-objective optimization using the genetic algorithm/singular value decomposition method for modelling the discharge coefficient in rectangular sharp-crested side weirs

In the present article, the adaptive neuro-fuzzy inference system (ANFIS) is employed to model the discharge coefficient in rectangular sharp-crested side weirs. The genetic algorithm (GA) is used for the optimum selection of membership functions, while the singular value decomposition (SVD) method helps in computing the linear parameters of the ANFIS results section (GA/SVD-ANFIS). The effect of each dimensionless parameter on discharge coefficient prediction is examined in five different models to conduct sensitivity analysis by applying the above-mentioned dimensionless parameters. Two different sets of experimental data are utilized to examine the models and obtain the best model. The study results indicate that the model designed through GA/SVD-ANFIS predicts the discharge coefficient with a good level of accuracy (mean absolute percentage error?=?3.362 and root mean square error?=?0.027). Moreover, comparing this method with existing equations and the multi-layer perceptron–artificial neural network (MLP-ANN) indicates that the GA/SVD-ANFIS method has superior performance in simulating the discharge coefficient of side weirs.     

基于小波和人工智能技术的车辆无缝定位技术研究

基于自适应神经模糊逻辑推理系统(ANHS),在全球定位系统(GPS)信号阻塞时,为惯性导航系统(INS)提供位置和速度修正量以提高系统的精度和鲁棒性.首先用小波对数据信号进行降噪处理;然后设定INS的位置或速度作为ANHS的输入参数,经训练后输出相应修正量,训练期望值为经小波多分辨率分析得到的位置误差和速度误差.实验表明,无GPS信号时定位精度比同条件下卡尔曼滤波精度提高约40%,因此该方法可为车辆提供可靠有效的导航定位服务.     

Discrimination of quarry blasts and earthquakes in the vicinity of Istanbul using soft computing techniques

The purpose of this article is to demonstrate the use of feedforward neural networks (FFNNs), adaptive neural fuzzy inference systems (ANFIS), and probabilistic neural networks (PNNs) to discriminate between earthquakes and quarry blasts in Istanbul and vicinity (the Marmara region). The tectonically active Marmara region is affected by the Thrace-Eski?ehir fault zone and especially the North Anatolian fault zone (NAFZ). Local MARNET stations, which were established in 1976 and are operated by the Kandilli Observatory and Earthquake Research Institute (KOERI), record not only earthquakes that occur in the region, but also quarry blasts. There are a few quarry-blasting areas in the Gaziosmanpa?a, Çatalca, Ömerli, and Hereke regions. Analytical methods were applied to a set of 175 seismic events (2001-2004) recorded by the stations of the local seismic network (ISK, HRT, and CTT stations) operated by the KOERI National Earthquake Monitoring Center (NEMC). Out of a total of 175 records, 148 are related to quarry blasts and 27 to earthquakes. The data sets were divided into training and testing sets for each region. In all the models developed, the input vectors consist of the peak amplitude ratio (S/P ratio) and the complexity value, and the output is a determination of either earthquake or quarry blast. The success of the developed models on regional test data varies between 97.67% and 100%.     

Modeling and analysis of effects of precipitation and vegetation coverage on runoff and sediment yield in Jinsha River Basin

This paper focuses on the effects of precipitation and vegetation coverage on runoff and sediment yield in the Jinsha River Basin. Results of regression analysis were taken as input variables to investigate the applicability of the adaptive network-based fuzzy inference system (ANFIS) to simulating annual runoff and sediment yield. Correlation analysis indicates that runoff and sediment yield are positively correlated with the precipitation indices, while negatively correlated with the vegetation indices. Furthermore, the results of stepwise regression show that annual precipitation is the most important factor influencing the variation of runoff, followed by forest coverage, and their contributions to the variation of runoff are 69.8% and 17.3%, respectively. For sediment yield, rainfall erosivity is the most important factor, followed by forest coverage, and their contributions to the variation of sediment yield are 49.3% and 24.2%, respectively. The ANFIS model is of high precision in runoff forecasting, with a relative error of less than 5%, but of poor precision in sediment yield forecasting, indicating that precipitation and vegetation coverage can explain only part of the variation of sediment yield, and that other impact factors, such as human activities, should be sufficiently considered as well.     

Load forecasting framework of electricity consumptions for an Intelligent Energy Management System in the user-side

This work presents an electricity consumption-forecasting framework configured automatically and based on an Adaptative Neural Network Inference System (ANFIS). This framework is aimed to be implemented in industrial plants, such as automotive factories, with the objective of giving support to an Intelligent Energy Management System (IEMS). The forecasting purpose is to support the decision-making (i.e. scheduling workdays, on-off production lines, shift power loads to avoid load peaks, etc.) to optimize and improve economical, environmental and electrical key performance indicators. The base structure algorithm, the ANFIS algorithm, was configured by means of a Multi Objective Genetic Algorithm (MOGA), with the aim of getting an automatic-configuration system modelling. This system was implemented in an independent section of an automotive factory, which was selected for the high randomness of its main loads. The time resolution for forecasting was the quarter hour. Under these challenging conditions, the autonomous configuration, system learning and prognosis were tested with success.