甘油三酸脂对硅溶胶的分散作用

通过对硅溶胶泥浆的流变性实验确定了硅溶胶泥浆的流变模型，验证并分析了加入少量经过低温氧化过的甘油三酸脂（ＧＴＯ）不改变硅溶胶泥浆的流变模型，但能有效地改善其流变性能。因此，ＧＴＯ可作为硅溶胶结合浇注料的高效减水剂。     

Understanding the Effects of Dispersant Addition to Slurry Rheology using Laser Scanning Confocal Microscopy

Abstract

The effectiveness of three dispersants to modify slurry rheology was examined using rheology measurements and laser scanning confocal microscopy (LSCM) in simulated waste solutions. All of the dispersants lowered the yield stress of the slurries below the baseline samples. The rheology curves were fitted reasonably to a Bingham Plastic model. The three-dimensional LSCM images of simulants showed distinct aggregates were greatly reduced after the addition of dispersants leading to a lowering of the yield stress of the simulated waste slurry solutions.     

Spray drying of drug-swellable dispersant suspensions for preparation of fast-dissolving,high drug-loaded,surfactant-free nanocomposites

Bioavailability of a poorly soluble drug can be improved by preparing a drug nanosuspension and subsequently drying it into nanocomposite microparticles (NCMPs). Unfortunately, drug nanoparticles aggregate during milling and drying, causing incomplete recovery and slow dissolution. The aim of this study is to investigate the impact of various classes of dispersants on drug dissolution from drug NCMPs, with the ultimate goal of enhancing the bioavailability of poorly water-soluble drugs via high drug nanoparticle loaded, surfactant-free NCMPs. Precursor suspensions of griseofulvin (GF, model drug) nanoparticles in the presence of various dispersants were prepared via wet stirred media milling and spray dried to form the NCMPs. Hydroxypropyl cellulose (HPC, polymer) alone and with sodium dodecyl sulfate (SDS, surfactant) was used as a base-line stabilizer/dispersant during milling. Two swellable crosslinked polymers, croscarmellose sodium (CCS) and sodium starch glycolate (SSG), and a conventional soluble matrix former, Mannitol, were used in addition to HPC. Besides being used as-received, CCS was also wet co-milled with GF for two different durations to examine the impact of CCS particle size. Laser diffraction, scanning electron microscopy, powder X-ray diffraction (XRD), UV spectroscopy, NCMP redispersion and dissolution tests were used for characterization. The results show that incorporation of CCS/SSG, preferably wet-milled to a wide particle size distribution, into the spray-dried NCMPs resulted in fast release and dispersion of drug nanoparticle clusters. The swellable dispersants were superior to Mannitol in dissolution enhancement, and could achieve fast release comparable to SDS, demonstrating the feasibility of spray drying to prepare high drug-loaded, surfactant-free nanocomposites.     

Dispersion and microwave processing of nano-sized ITO powder for the fabrication of transparent conductive oxides

Aqueous dispersions of tin-doped indium oxide (ITO) nanopowder were prepared and the effect of the addition of PEG 400, Tween 80 and β-alanine as dispersants was investigated using zeta potential and particle size distribution measurements. Both PEG 400 and β-alanine were found to produce stable dispersions that were used to deposit ITO thin films on glass substrates by dip and spin coating methods. The ITO thin films were heat-treated using both conventional and microwave heat treatment in order to improve the inter-particle connections and hence the resistivity and transparency of the films. All the films exhibited an average transmittance of >80% over the visible spectrum after being subjected to the heat treatment process. ITO films prepared with no dispersant showed very high resistivity values for both heating methods, however addition of 2 wt% PEG 400 to the dispersion yielded a reduction in the resistivity values to 1.4×10⁻¹ Ω cm and 3.8×10⁻² Ω cm for conventionally and microwave treated films, respectively. The surface morphological studies confirmed that addition of dispersants improved the film uniformity and inter-particle connections of the ITO films considerably.     

Influence of dispersants on coal-water slurry prepared from the solid residue of plasma pyrolysis of coal

This work presents the influence of dispersants on coal-water slurry (CWS), which was prepared from the solid residue of plasma pyrolysis of coal. The effects of dispersant type, solid concentration, dispersant content, and temperature on the rheological properties of CWS are examined. A suitable empirical model regarding the relation between viscosity and temperature is proposed. Through the sedimentation experiment of CWS, dispersants are found to significantly promote the stability of CWS.     

Dispersion and rheological properties of concentrated kaolin suspensions with polycarboxylate copolymers bearing comb-like side chains

Comb-like polycarboxylate copolymers (PCs) were synthesized and first used as the dispersants for kaolin suspensions. The apparent viscosity, adsorption behavior, zeta potential, rheological behavior, and TEM images of concentrated kaolin slurries deflocculated with these copolymers were systematically investigated. Sodium acrylate homopolymer (SA) was selected as a reference in order to contribute to the knowledge of how the electrostatic interaction and molecular structure of these copolymers influenced the dispersion, adsorption, and rheological properties of colloidal kaolin suspensions. The results showed that the dispersion of kaolin slurries mainly depended on the synergistic effects of electrostatic interaction and steric hindrance for APEG type comb-like copolymers. PC₂ bearing proper carboxylic groups and side chains produced stable dispersion and fluidity in concentrated kaolin slurries. Based on the electrostatic and steric effect of comb-like copolymers, the kaolin slurries displayed a shear thickening behavior, and the Herschel–Bulkley model well described their rheological behaviors.     

Citrate- and glycerol triesters as novel dual-functional dispersants and plasticisers for ceramic processing

Short chained triesters of glycerol and citric acid were systematically investigated as novel dual-functional dispersants and plasticisers for use in ceramic processing. Additional systematic studies on a series of diesters having structural similarities with the citrate and glycerol triesters were performed to further assess the significance of specific functional groups for the stabilisation of suspensions.The overall purpose of this work consists in simplifying the formulation for ceramic processing slurries while at the same time limiting the environmental impact and toxicity. The use of multifunctional additives reduces the risk of unwanted interactions between different components. Additionally, the possible use of one additive in more than one role opens the opportunity for an overall reduction in the number and amount of chemicals and therefore reduction of costs and risks.For the citrate ester candidates, different alkoxy groups were tested as well as the acetylation on the hydroxyl group. The glycerol esters differed by the length of the carboxylic chain.Especially triethyl and tributyl citrate are proposed as promising dual-functional additives for ceramic processing. Specifically, for triethyl citrate the dual-function was finally demonstrated by producing a dense piece of 8YSZ through tape casting and subsequent sintering.     

Associative polymer/particle dispersion phase diagrams III: Pigments

The colloidal interactions of both HEUR and HASE associative polymers with pigments in the presence of dispersant are complicated and subject to a number of variables. The objective of this work was to clarify the conditions needed to achieve good pigment dispersion in associative thickener systems by characterizing particle dispersion behavior. This had previously been done for latex particles, but not for pigments such as TiO₂. Good dispersion leads to optical properties, such as gloss and hiding, that are superior to nonassociative thicknener systems. Pigment dispersion phase diagrams represent a good way to visualize the complex interactions among pigments, dispersant, and thickener. The two most important variables were found to be pigment type (i.e., surface composition) and dispersant composition. Associative thickners can yield good pigment dispersion or flocculation, depending on the correct matching of dispersants and pigment type. Because of the hydrophobic functional groups governing associative thickner behavior, dispersants having some hydrophobic character yielded the best pigment dipersions and optical properties because they could couple the pigment particles with the associative thickener network. Interior-grade TiO₂ tended to yield better dispersions and optical properties than exterior-grade TiO₂. Optimized associative thickner systems generally had improved optical properties over comparable nonassociative systems. Optical properties correlated well with particle dispersion behavior as displayed by the dispersion phase diagrams. Presented at the Tess Symposium of the 230th American Chemical Society National Meeting, Aug. 28–Sept. 1, 2005, in Washington, D.C.     

Effects on aqueous barium titanate tape properties of passivation of barium ion leaching by using dispersants

To passivate a barium titanate (BaTiO₃) ceramic powder surface from Ba²⁺ ion leaching in water, passivation agent layer (PAL) was formed by drying the slurry after adding a commercial polymeric dispersant. By following the several characteristic steps of actual MLCC production process, slip and green properties were compared for two different polymer-adding modes; one is the PAL and the other is the conventional dispersant mode. Compared to the conventional dispersant adding method, PAL mode was the only effective way in reducing the amount of Ba²⁺ leaching. However, slip viscosity and green body properties were not a function of adding mode but a function of dispersant itself, which means using PAL did not deteriorate any of slip and green properties of BaTiO₃.     

Dissolution and Dispersion Behavior of Barium Carbonate in Aqueous Suspensions

Dissolution of BaCO₃ and its effect on the dispersion behavior of aqueous BaCO₃ suspensions at various pH values have been investigated. The amount of leached Ba²⁺ decreases with increasing pH value, which agrees with thermodynamically calculated results. The dissolution of BaCO₃ also causes an increase in pH value of the suspension, but the change decreases with increasing initial pH value. The isoelectric point (IEP) of leached BaCO₃ powder is at a pH of ∼10–10.5 and remains unchanged with increasing solids loading. The IEP of BaCO₃ shows no significant change with added KCl or K₂CO₃, but shifts to a higher pH with increasing concentration of added BaCl₂.