基于深度学习的秀丽隐杆线虫显微图像分割方法

利用计算机实现自动、准确的秀丽隐杆线虫(C.elegans)的各项形态学参数分析,至关重要的是从显微图像上分割出线虫体态,但由于显微镜下的图像噪声较多,线虫边缘像素与周围环境相似,而且线虫的体态具有鞭毛和其他附着物需要分离,多方面因素导致设计一个鲁棒性的C.elegans分割算法仍然面临着挑战。针对这些问题,提出了一种基于深度学习的线虫分割方法,通过训练掩模区域卷积神经网络(Mask R-CNN)学习线虫形态特征实现自动分割。首先,通过改进多级特征池化将高级语义特征与低级边缘特征融合,结合大幅度软最大损失(LMSL)损失算法改进损失计算;然后,改进非极大值抑制;最后,引入全连接融合分支等方法对分割结果进行进一步优化。实验结果表明,相比原始的Mask R-CNN,该方法平均精确率(AP)提升了4.3个百分点,平均交并比(mIOU)提升了4个百分点。表明所提出的深度学习分割方法能够有效提高分割准确率,在显微图像中更加精确地分割出线虫体。     

不同级配对微表处混和料性能的影响

微表处技术是一种性能优良的路面养护技术。首先检验了微表处用原材料的技术指标,在满足规范的要求下选择了三种不同级配,并对三种不同级配的微表处混和料的使用性能进行了比较。     

On the effects of the packet size distribution on the packet loss process

Real-time multimedia applications have to use forward error correction (FEC) anderror concealment techniques to cope with losses in today’s best-effort Internet. The efficiency of these solutions is known however to depend on the correlation between losses in the media stream. In this paper we investigate how the packet size distribution affects the packet loss process, that is, the distribution of the number of lost packets in a block, the related FEC performance and the average loss run length. We present mathematical models for the loss process of the MMPP+M/D/1/K and the MMPP+M/M/1/K queues; we validate the models via simulations, and compare the results to simulation results with an MPEG-4 coded video trace. We conclude that the deterministic packet size distribution (PSD) not only results in lower stationary loss probability than the exponential one, but also gives a less correlated loss process, both at a particular average link load and at a particular stationary loss probability as seen by the media stream.Our results show that for applications that can only measure the packet loss probability, the effects of the PSD on FEC performance are higher in access networks, where a single multimedia stream might affect the multiplexing behavior. Our results show that the effects of the PSD on FEC performance are higher in access networks, where a single multimedia stream might affect the multiplexing behavior and thus can improve the queuing performance by decreasing the variance of its PSD.     

应用数字PWM器件SA4828的大功率直流电源

本文介绍一种智能型、高精度PWR控制器SA4828，其控制实行全数字化产生三相脉宽调制波形．本文采用此器件设计大功率直流电源应用于22KW直流电机测试，对感性负载表现出具有纹波小，响应迅速、硬件电路简洁、控制简单易于编写的优点。     

济钢中厚板厂3500mm精轧机快速换辊自控系统

中厚板厂3500mm精轧机快速换辊自控系统，集可编程序控制器、变频传动技术、液压控制于一体。实现了工作辊、支承辊准确、快速地更换。通过网络技术与其他控制系统进行数据交换、操作及连锁，使轧制生产线实现了全自动化轧制，不仅改善了工人的劳动强度，还提高了产品的产量及质量，取得了巨大的社会效益及经济效益。     

Stabilization of fixed modes in expansions of LTI systems

The objective of this note is to propose a method for stabilization of structurally fixed modes in expansions of LTI dynamic systems in the scope of overlapping decentralized control design based on the expansion/contraction framework, enabling successful design for a broader class of problems than considered so far. The method is based on a judicious choice of complementary matrices in the expanded space. Numerical examples are provided to illustrate simplicity and efficiency of the proposed approach.     

A review of robust design methods for multiple responses

Problems in engineering design often involve determining design variable settings to optimize individual product performance for multiple criteria, which are often in conflict. We review mathematically rigorous techniques from the statistical literature for finding a vector x of design variable settings, which produces an optimal compromise solution among a group of prioritized response variables. The best compromise solution is typically gained by optimizing an objective function, which incorporates the prioritized demands of multiple responses. Since most multi-response objective functions are constructed by combining the functions used to optimize univariate responses, a review of the prominent univariate approaches is presented first. A multivariate approach from the engineering literature called the compromise Decision Support Problem is also reviewed. Finally a table comparing the relative merits of the different multivariate approaches summarizes the article in a concise and user-friendly fashion.     

PI control of discrete linear repetitive processes

Repetitive processes are a distinct class of 2D systems (i.e. information propagation in two independent directions) of both systems theoretic and applications interest. They cannot be controlled by direct extension of existing techniques from either standard (termed 1D here) or 2D systems theory. In this paper, we exploit their unique physical structure to show how two term, i.e. proportional plus integral (or PI) action, can be used to control these processes to produce desired behavior (as opposed to just stability).     

一种LCD显示控制器IP核的设计与验证

介绍了一种用于LCD显示控制芯片的设计和验证过程。设计中利用Verilog语言对LCD显示控制器进行了描述和设计。并通过了仿真验证。本LCD控制器具有很好的可移植性，稍作改动便可应用于不同类型和应用场合的LCD显示控制。