应用MSP50C30设计电子语音导游机

文章在简要介绍了MSP50C30的结构和特性的基础上，给出了利用MSP50C30设计电子语音导游机的硬件电路和软件编程方法。     

中关村中心区水文地质及工程地质特征

本文全面、系统地分析了北京市中关村中心区的水文地质及工程地质特征 ,为该地区的工程建设提供可靠的地质资料     

KZON-50/120空分设备的安装调试及设计改造

在KZON-50/120空分设备的安装调试和试运行过程中,对其机械和电器部分进行了多处改造,克服了原设计中存在的不足之处。改造后,机械和电器性能更加趋于合理,操作简单,便于维护,降低了制气费用,提高了制气纯度和经济效益,保证了空分设备更加安全可靠运行。     

注射成形Fe-50%Ni软磁合金的研究

Fe-50 %Ni合金是一种典型的高磁导率和低矫顽力的软磁材料,有着广阔的应用前景.本次实验采用注射成形方法制取Fe-50 %Ni,研究了在注射成形工艺中烧结工艺对最终产品性能及微观组织的影响,并分析了影响产品磁性能的一些主要因素.实验表明,烧结温度的提高和烧结时间的延长能够较好改善产品的力学性能;密度是影响产品磁性能的主要因素,杂质(主要指(C、O、N)的含量和晶粒尺寸对剩磁、磁导率和矫顽力也有较大的影响;通过注射成形方法制取的Fe-50 %Ni,其性能要优于采用传统粉末冶金方法制造的Fe-50 %Ni.     

灌河潮流界位置确定与港口防淤探讨

盐城市位于江苏省中部,地处黄海之滨,承接里下河腹部区的排水,区内入海河流众多,在这些入海河流上大多建有挡潮闸坝。但由于盐城市近海为淤积型海岸,闸坝的建设改变了河口的自然状态,造成港口下游淤积严重,排水不畅。灌河作为江苏省沿海唯一下游没有建挡潮闸的重要入海河流,仍为自然状态,下游港口未淤积。本文通过对灌河水体涨、落潮中氯离子含量的监测,找出海水上溯的最大距离,确定其影响范围,为其它入海流河流的防淤提供借鉴。     

Constructing a short form of the Smoking Consequences Questionnaire with adolescents and young adults.

The goal of the present studies was to construct and validate a short form of the 50-item Smoking Consequences Questionnaire (SCQ; T. H. Brandon & T. B. Baker, 1991), a measure of smoking outcome expectancies. In Study 1, a 21-item short form (S-SCQ) was derived from a sample of 107 young adults previously treated for substance abuse. In Study 2, the measure was cross-validated on 125 adolescents in treatment for substance abuse. Confirmatory factor analyses revealed good model fit and factorial invariance for the 4 S-SCQ subscales across both samples. Validation analyses on each sample found that subscale scores generally correlated significantly with smoking-related variables. The present studies provide initial evidence for the utility of the S-SCQ when used with young adults and adolescents. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Direct electroless Ni-P deposition on AM50 magnesium alloy from sulfate bath

A bright electroless Ni-P deposition on AM50 magnesium alloy in a sulfate plating bath was proposed by using direct plating process with non-chromate pretreatment. The electroless Ni-P plating on AM50 magnesium alloy has an admirable appearance and good adhesion. The results indicate that the electroless Ni-P deposition with non-chromate pretreatment has better adhesion than that of zinc immersion coating. Anodic polarization curves indicate that the electroless Ni-P deposition obtained from the sulfate bath has similar corrosion-resistance to that obtained from basic nickel carbonate bath. The deposition process generates less pollutant by a non-chromate plating bath and is suitable for the magnesium alloys manufacture because of its low cost. The hardness of the electroless Ni-P plated AM50 is about HV 720.6 and HV 969.7 after heat treatments at 180℃ for 2 h. The wear resistance of Ni-P plated magnesium alloy specimens is about 5 to 9 times as high as that of bare magnesium alloys.     

Optimal estimation of parameters of dynamical systems by neural network collocation method

In this paper we propose a new method to estimate parameters of a dynamical system from observation data on the basis of a neural network collocation method. We construct an object function consisting of squared residuals of dynamical model equations at collocation points and squared deviations of the observations from their corresponding computed values. The neural network is then trained by optimizing the object function.The proposed method is demonstrated by performing several numerical experiments for the optimal estimates of parameters for two different nonlinear systems. Firstly, we consider the weakly and highly nonlinear cases of the Lorenz model and apply the method to estimate the optimum values of parameters for the two cases under various conditions. Then we apply it to estimate the parameters of one-dimensional oscillator with nonlinear damping and restoring terms representing the nonlinear ship roll motion under various conditions. Satisfactory results have been obtained for both the problems.     

国产50%离子膜法烧碱蒸发装置及运行情况

介绍了升降膜法双效逆流蒸发生产50%离子膜法烧碱的工艺流程、主要设备、装置特点及运行情况.     

Characterization of thick epitaxial silicon detectors from different producers after proton irradiation

Epitaxial (EPI) silicon has recently been investigated for the development of radiation tolerant detectors for future high-luminosity HEP experiments. A study of thick EPI silicon diodes irradiated with protons up to a fluence of has been performed by means of Charge Collection Efficiency (CCE) measurements, investigations with the Transient Current Technique (TCT) and standard CV/IV characterizations. The aim of the work was to investigate the impact of radiation damage as well as the influence of the wafer processing on the material performance by comparing diodes from different manufacturers. The changes of CCE, full depletion voltage and leakage current as a function of fluence are reported. While the generation of leakage current due to irradiation is similar in all investigated series of detectors, a difference in the effective doping concentration can be observed after irradiation. In the CCE measurements an anomalous drop in performance was found even for diodes exposed to very low fluences in all measured series. This result was confirmed for one series of diodes in TCT measurements with an infrared laser. TCT measurements with a red laser showed no type inversion up to fluences of for n-type devices whereas p-type diodes undergo type inversion from p- to n-type for fluences higher than .