Hybrid make-to-stock and make-to-order systems: a taxonomic review

Production planning and control (PPC) systems that employ aspects from both make-to-order (MTO) and make-to-stock (MTS) production control are known as hybrid MTS/MTO systems. While both MTO and MTS separately have been studied extensively, their combined use has received less attention. However, the literature on this topic is growing and this paper shows that the review performed in this paper is an important addition to the field. We categorise relevant literature according to a novel taxonomy and show that hybrid MTS/MTO production control can be used in different contexts. In addition, an overview of the modelling techniques and methods used in these papers is provided. Based on the reviewed literature, relevant research questions and directions for future research are identified. Finally, it is shown that hybrid MTS/MTO production control is prevalent in practice by discussing research with industrial applications. The paper contains an overview of research on hybrid MTS/MTO production control to be used as reference for researchers active in the field, and provides managerial insights and directions for future research on this topic.     

镍层耐硝酸腐蚀性测试——一种简单的预先探测ENIG镍层“黑盘”现象的测试方法

随着更加精细的SMT、BGA等表面贴装技术的运用,化学沉镍金(ENIG)作为线路板最终表面处理得到了越来越广泛的应用,同时可怕的“黑盘”现象也随之更广泛地“流行”起来,直接导致贴装后元器件焊接点不规则接触不良。为了贯彻执行最好的流程控制和采取有效的预防措施,了解这种焊接失败的产生机理是非常重要的,及早的观测到可能发生“黑盘”现象的迹象变得同样关键。本文介绍了一种简单的预先探测ENIG镍层“黑盘”现象的测试方法-镍层耐硝酸腐蚀性测试,这种测试可以用于作为一种常规的测试方法监测一般化学沉镍溶液在有效使用寿命范围内新鲜沉积的镍层的质量。利用Weibull概率统计分析在不同的金属置换周期(MTO)下镍层的可靠性能表现。结合试验结果得出了一个镍层耐硝酸腐蚀性的判定标准。     

Reaction scheme and kinetic modelling for the MTO process over a SAPO-18 catalyst

A kinetic model for simulation of the MTO process over SAPO-18 catalyst in a wide range of operating conditions has been proposed. The kinetic model predicts the experimental evolution of reaction products with time on stream, which follows three consecutive periods: initiation (where olefin production increases), a period of maximum olefin production and a period in which this production decreases. The kinetic scheme takes into account these three steps that evolve with time on stream: formation of active intermediate compounds, an step where olefins are formed by reaction of oxygenates (methanol/DME) with these intermediates and deactivation of intermediates by degradation to coke. The presence of water in the reaction medium attenuates the reaction rate of these steps. Discrimination of kinetic equations and calculation of the parameters of best fit have been carried out by solving the mass conservation equations of the individual components of the kinetic scheme together with the kinetic equation for deactivation and taking into account the effect of water on the kinetics of each step.     

Direct observation of induction period of MTO process with consecutive pulse reaction system

The initial transformation of methanol over HZSM-5 catalyst was investigated by a consecutive pulse reaction system. The reactant–catalyst contact time influenced the initial methanol transformation and the performances implied methanol reaction in induction period or under steady-state condition. The induction period, in which an organic-free HZSM-5 catalyst could be transferred to a working catalyst, were directly observed. The analysis result of the product stream predicted hydrogen-deficient species deposition over catalyst surface at the beginning of MTO reaction. The hydrogen transfer level of steady-state MTO reaction also varied with reaction contact time.     

高级计划与排程在MTO型企业中的应用研究

高级计划与排程是一种基于约束理论面向供应链的生产计划与排程工具，APS软件系统从ERP系统获取基础数据进行生产排程，再将排程结果送到ERP和生产系统中执行。本文在分析MTO型企业生产计划制定实施关键流程的基础上，对APS在企业生产排程中的应用方法进行了深入研究，同时探讨了系统集成的体系架构和关键实现技术。     

不同硅铝比SAPO-44分子筛合成及甲醇制烯烃催化性能研究

以环己胺为模板剂,合成了不同硅铝比的SAPO-44分子筛,分别采用XRD、SEM、NH3-TPD等表征手段对所合成的样品进行了表征,并在固定床上考察了样品的甲醇制烯烃催化性能。结果表明,随着硅铝比的增加,样品的相对结晶度有所增加,表面酸性有增强的趋势,分子筛晶体出现一些非立方晶体物种;同时,初始烯烃选择性随着硅铝比的增加而降低,反应产物中的丙烯/乙烯质量比则呈现升高的趋势。     

SAPO-34分子筛催化剂制备及发展现状

乙烯和丙烯作为重要的化工原料,在经济发展中的需求量越来越大。在石油资源越来越匮乏的今天,甲醇制烯烃作为一种可以代替常规石油路线生产低碳烯烃的新工艺受到广泛关注。SAPO-34分子筛因为高甲醇转化率和优良烯烃选择性成为当前甲醇制烯烃工艺催化剂的研究重点。合成SAPO-34分子筛的影响因素有模板剂、合成原料和反应条件等。通过调节分子筛粒径尺寸、酸性、金属改性可以实现分子筛的性能优化。介绍了SAPO-34分子筛催化剂常用的制备方法和一些分子筛催化剂改进的专利。使用一定时间后催化剂由于积炭而失活,再生工艺目前主要采用烧焦再生。2011年,神华煤制烯烃示范工程进入工业化运行,近年陆续有多套甲醇制烯烃装置投产和在建,煤制烯烃正在改变中国聚烯烃市场格局。     

甲醇制烯烃(MTO)反应器分布管堵塞原因分析及措施

为解决反应器分布管堵塞导致分布管压差上涨问题,寻求解决方法。对影响反应器分布管堵塞的因素,如MTO装置急冷水、水洗水、浓缩水、废甲醇水、压缩机段间凝液等进行试验和对分布管堵塞原因进行分析。通过优化污水汽提塔操作,控制污水汽提塔塔顶出料冷后温度高于120℃,将污水汽提塔塔顶的低温冷却器切换至高温冷却器和控制较低的pH值(8.0),减少了堵塞物的生成;对不凝气及浓缩水进行工艺改造优化了污水汽提塔的操作,解决了反应器分布管的堵塞问题。含有一定浓度醛酮类物质的浓缩水,在碱性环境中可以发生缩聚反应,在污水汽提塔系统内生成交联物,导致反应器分布管的堵塞。     

MTO催化剂离心喷雾干燥制备过程的数值模拟

采用CFD模型对MTO催化剂喷雾干燥过程进行了非稳态数值模拟,得到了10s内热空气的湿含量、温度、速度、速度向量分布,以及催化剂颗粒的运动轨迹、停留时间和粒径分布.通过与试验结果的对比分析表明,模拟结果可信,模拟离心式喷雾干燥过程可行.     

甲醇制低碳烯烃技术研究进展

甲醇制低碳烯烃(MTO)技术提供了一种以煤制甲醇为原料生产烯烃的途径。本文重点讨论了国内外MTO工艺的发展概况、工艺流程和使用现状,介绍了催化剂研究进展和MTO工艺的反应机理,对MTO技术应用及其制约条件进行了初步分析,并根据我国的实际情况对其开发应用前景进行了展望。