8-R-9苄基-9H-嘌呤衍生物的合成研究

采用 (Ph3 P) 2 PdCl2 为催化剂 ,DMF为溶剂 ,对 8 碘 9 苄基 9H 嘌呤与有机锡试剂RSnBu3 (R=乙烯基、2 噻吩基、2 呋喃基、苯乙炔基和苯基等 )之间的Stille偶合反应进行了研究 ,合成出了5种 8位取代的嘌呤衍生物。在反应温度为 80℃ ,n(8 碘 9 苄基 9H 嘌呤 )∶n (RSnBu3 )∶n〔(Ph3 P) 2 PdCl2 〕 =1 0∶1 2∶0 0 5的较佳工艺条件下 ,产品收率 4 1%～ 91%。用1H NMR、13 C NMR和MS对产物进行了表征     

Pb（Sc1／2Ta1／2）O3铁电体的有序结构和介电性质）

通过铌铁矿预合成法制备Ｐｂ（Ｓｃ１／２Ｔａ１／２）Ｏ３（ＰＳＴ）陶瓷，经适当的热处理获得了钙钛矿化合物Ｂ位离子的高有序和高无序试样，ＰＳＴ陶瓷的介电性质研究结果表明，高有序试样（Ｓ＝０．７７）的居里温度为２９℃，并具有较低的介电常数表现出普通铁电体性质特征，而高元序试样（Ｓ＝０）具有很高的介电常数，并表现出明显的弥散性相转变和Ｔｍ的频率色散行为，即高介电常数的驰豫铁电体性质。文中还利用ＸＲＤ，ＳＥ     

γ—TiAl增压涡轮熔模铸造过程数值模拟研究

根据熔模型壳离心浇注的铸造工艺特点，建立了γ－TiAl增压涡轮凝固传热过程的数值模型，推导了离心压力下γ－TiAl金属间化合物的凝固收缩和补缩过程数学模型，模拟计算了γ－TiAl增压涡轮铸件的温度场和收缩缺陷，结果表明，模型能可靠计算γ－TiAl增压涡轮铸件凝固过程的温度分布和准确预测铸件的收缩缺陷，数值模拟结果与实验结果吻合良好，数值模拟结果证实了前期工作所提出的进一步减少及消除收缩缺陷的优化工艺措施的合理性。     

Ti5Nb人工钉扎中心NbTi超导体的磁通钉扎机制分析

采用棒基组合的装配方法，用热挤压和冷加工相结合的工艺制备了岛状Ti5Nb人工钉扎中心NbTi超导体，其中Ti5Nb体积含量为10％。通过对此超导体进行详细的磁通钉扎机制分析，认为样品的磁通钉扎力特征主要由正常相钉扎和Δκ扎相结合的机制决定。根据分析的结果，采用多源标度方法，很好地拟合了不同线径样品的磁通钉扎力密度随磁场变化的曲线。拟合的结果表明：样品在较低场下的性能主要由正常相钉扎机制决定，而在较高场下的性能主要由Δκ钉扎机制决定。并且随着线径的减小，正常相钉扎力密度和Δκ钉扎力密度均有不同程度的提高。     

3D Evaluation Method of Cutting Surface Topography of Carbon / Phenolic (C/Ph) Composite

3D evaluation method of cutting surface topography for C/Ph composites was established.The cutting surface was measured by Talyscan 150,using 3D non-contact measurement.Through the results of 2D and 3D roughness evaluating for C/Ph composite and Duralumin,the 2D evaluation method of the cutting surface topography of C/Ph composite loses a lot of information,the characteristics of the surface topography of C/Ph composite can be comprehensively and authentically evaluated only by 3D evaluation method.Furtherm...     

国内广告学位论文研究现状的实证分析

此文采用文献定量分析方法,以中国国家数字图书馆、中国知网和万方数据知识服务平台中的硕博士学位论文数据库为研究平台,查询1988~2012年广告研究方向的硕博士学位论文共3967篇,分析它们的培养单位、指导教师、专业构成、学科特征、历年数量、关键词、研究内容、选题特点等方面内容,并解释其中一些特有现象的形成原因,以此从某一侧面反映当前国内广告学位教育与研究的特点。     

A White Plaque,Associated with Genomic Deletion,Derived from M13KE-Based Peptide Library Is Enriched in a Target-Unrelated Manner during Phage Display Biopanning Due to Propagation Advantage

The nonspecific enrichment of target-unrelated peptides during biopanning remains a major drawback for phage display technology. The commercial Ph.D.^TM-7 phage display library is used extensively for peptide discovery. This library is based on the M13KE vector, which carries the lacZα sequence, leading to the formation of blue plaques on IPTG-X-gal agar plates. In the current study, we report the isolation of a fast-propagating white clone (displaying WSLGYTG peptide) identified through screening against a recombinant protein. Sanger sequencing demonstrated that white plaques are not contamination from environmental M13-like phages, but derive from the library itself. Whole genome sequencing revealed that the white color of the plaques results from a large 827-nucleotide genomic deletion. The phenotypic characterization of propagation capacity through plaque count- and NGS-based competitive propagation assay supported the higher propagation rate of Ph-WSLGYTG clone compared with the library. According to our data, white plaques are likely to arise endogenously in Ph.D. libraries due to mutations in the M13KE genome and should not always be viewed as exogenous contamination. Our findings also led to the conclusion that the deletion observed here might be an ancestral mutation already present in the naïve library, which causes target-unrelated nonspecific enrichment of white clone during biopanning due to propagation advantage.     

DZ40M钴基合金铝化物涂层的循环氧化

以新型定向凝固钴基高温合金ＤＺ４０Ｍ为基体,研究其低压化学气相沉积铝化物涂层的循环氧化行为,发现该涂层具有较高的抗循环氧化性能,涂层与基体结合良好。涂层退化主要是由外表面氧化膜的愈合消耗Ａｌ源所造成,沉积渗剂中加入Ｔｉ可加速涂层的退化。     

Mo—La2O3烧结坯间隙杂质的研究

通过扫描电镜（ＳＥＭ）、电子探针（ＥＰＭＡ）、Ｘ射线衍射（ＸＲＤ）及俄歇电子能谱（ＡＥＳ）研究了Ｍｏ－Ｌａ２Ｏ３烧结坯中的间隙杂质。结果表明：Ｌａ２Ｏ３的加入提高了烧结睛坯的抗弯强度和韧性。间隙杂质不驻存在于Ｍｏ中,而且在Ｌａ２Ｏ３粒子表面吸附,使晶界杂质浓度降低。     

Self-assembled polyaniline nanorods synthesized by facile route of dispersion polymerization

We report the preparation of ordered polyaniline nanorod arrays by a simple method without the use of any template. The synthesis method is by a chemical route, viz. dispersion polymerization of aniline in polyvinyl alcohol. The nanorods obtained have a diameter of 100-500 nm and a length of a few micrometers. Films containing the nanorod assembly have been characterized by SEM, XRD and FTIR spectroscopy. We have also measured I-V characteristics and the temperature dependence of the conductivity of the films. We discuss the formation mechanism of the self-assembled nanostructures, the morphology of the films, and the crystallinity and the transport mechanism.