停棒子系统与控制棒组操作范围监测试验

本文叙述了反应堆保护系统停棒与汽轮机降功率子系统的系统功能、保护参数和秦山核电站控制棒组插入监测器的设计与参数选择,确定了控制棒提升上极限值和在不同工况下棒插入低位、低-低位整定值,并在热态零功率条件下加以验证。试验证明参数选择是合理的,为功率运行阶段提供了数据。     

A study on UV-curable coatings for HD-DVD: Primer and top coats

This study relates to the development of coatings for optical discs in high-density digital versatile disc systems (HD-DVD or blue lay disk) that use a high numerical aperture of 0.85 at 405 nm wavelength and have a protective top layer over a primer layer for protection against damage and dust. Ultraviolet-curable raw materials of two acrylic monofunctional monomers ( isobornylacrylate, IBA and tetrahydrofurfurylacrylate, THFA) and two kinds of urethaneacrylate oligomers (OUMD and OUME) have been easily mixed with photoinitiators. Curing rate of these materials was characterized by FT-IR. In case of top coats, VTES (vinyltriethoxysilane) and acrylic acid were added to enhance the abrasion resistance. These two kinds of UV-curable resinous materials having no solvent were synthesized and investigated as means for making a blue ray disk having good optical and mechanical properties. In addition, dynamic characteristics including reflectivity, fluctuation of RF signal and noise level were also investigated.     

半导体集成电路在锂离子电池保护电路中的应用

本文首先扼要介绍锂离子电池保护电路的功能，然后分别介绍过充电保护，过放电保护，过电流保护，最后列举几种保护性半导体IC的性能及应用电路的结构。     

Optimisation of metallic pigments in coatings by an electrochemical technique and an investigation of manganese powder as pigment for metal rich primers

Zinc dust and manganese powder as pigments were incorporated in epoxy-polyamide and butyl titanate medium, with different pigment volume concentration (PVC) ranging from 20 to 74. These protective coatings were coated on sand blasted mild steel substrates and immersed in 3 wt.% sodium chloride solution and the corrosion current was measured by the Tafel extrapolation method. From the corrosion current produced by these primers, the optimum level of the pigments in these binders was identified. Thus the protective performance of optimised primers was evaluated on a sand blasted mild steel surface by the Tafel polarisation method in 3 wt.% sodium chloride solution, over different periods of time. The results were found to be comparable with the salt spray test and galvanic current measurements. The manganese powder used for this investigation showed that it could be used as an alternative to zinc powder for metal rich primers.     

转炉冶炼20管坯钢生产实践

介绍了20#管坯钢的生产试验工艺，采取了拉碳法脱碳、钢包底吹氩及喂丝、保护浇铸、合理控制拉速等有效措施，解决了生产中存在的质量问题，为下一步的生产提供了理论和实践依据。     

光学和传感器的防护技术

近年来，光电技术发展异常迅速，在这些技术装备中，当用光学聚焦时，辐射能量对光学元件、探测器都会构成威胁。本文讨论辐射对光学和探测器的影响以及降低其影响的防护技术。     

堆底熔穿事故的场外后果及其对策

在压水堆核电站应急计划和应急响应中，堆底熔穿事故占有重要位置。本文用法国核电厂事故源项Ｓ３（对应于堆底熔穿事故）计算了在典型气象条件下的场外放射学的后果，根据一般防护决策原则和我国颁布的干预水平，提出了保护公众的应急防护措施的建议。     

Galvanic corrosion over a semi-infinite, planar surface

We derive the governing equations for the galvanic coupling of two dissimilar materials in a planar surface wherein the transport phenomena in the liquid phase are controlled by ionic migration or diffusion. The problem statement corresponds to two semi-infinite materials located in the same plane and coupled along a single boundary, resulting in a two-dimensional analysis. A single dimensionless group arises in the analyses of the corrosion problems, which greatly simplifies the presentation of numerical results and subsequent implementation. An example application of this work is presented that demonstrates how the results can be used to set requirements for protective films (e.g., paint) utilized for reducing corrosion rates.     

A novel approach for fit analysis of thermal protective clothing using three-dimensional body scanning

The garment fit played an important role in protective performance, comfort and mobility. The purpose of this study is to quantify the air gap to quantitatively characterize a three-dimensional (3-D) garment fit using a 3-D body scanning technique. A method for processing of scanned data was developed to investigate the air gap size and distribution between the clothing and human body. The mesh model formed from nude and clothed body was aligned, superimposed and sectioned using Rapidform software. The air gap size and distribution over the body surface were analyzed. The total air volume was also calculated. The effects of fabric properties and garment size on air gap distribution were explored. The results indicated that average air gap of the fit clothing was around 25–30 mm and the overall air gap distribution was similar. The air gap was unevenly distributed over the body and it was strongly associated with the body parts, fabric properties and garment size. The research will help understand the overall clothing fit and its association with protection, thermal and movement comfort, and provide guidelines for clothing engineers to improve thermal performance and reduce physiological burden.     

Protective properties of organic phosphate-pigmented coatings on phosphated steel substrates

Investigations have been carried out on properties of coatings, differing by their pigmentation and binder, and applied on different chemical pre-treatments of the steel surface. Paints based on alkyd and alkyd-melamine binders, pigmented with zinc phosphate and modified basic zinc phosphate were applied on amorphous and crystalline phosphated steel surface and, for the comparison purpose, on degreased steel surface. The effect of the binder, the pigment and the pre-treatment of the steel surface on the protective properties of the coatings were determined by measurements of adhesion, water absorption and water permeability and by results obtained in salt spray and Prohesion tests. Coatings based on alkyd binder show a lower damage degree and good retention of adhesion in corrosion conditions, in spite of a higher water absorption and water permeability and a lower initial adhesive strength. Protective properties of coatings have been found to be highly dependent upon the substrate pre-treatment. Chemical pre-treatment of the steel substrate increases the protective properties of the system, which is particularly evident in the case of crystalline phosphating and the coating pigmented with modified basic zinc phosphate. This phenomenon can be explained by the synergism between this phosphate pigment with crystalline phosphate layer.