Weighted Superposition Attraction (WSA): A swarm intelligence algorithm for optimization problems – Part 2: Constrained optimization

This paper is the second one of the two papers entitled “Weighted Superposition Attraction (WSA) Algorithm”, which is about the performance evaluation of the WSA algorithm in solving the constrained global optimization problems. For this purpose, the well-known mechanical design optimization problems, design of a tension/compression coil spring, design of a pressure vessel, design of a welded beam and design of a speed reducer, are selected as test problems. Since all these problems were formulated as constrained global optimization problems, WSA algorithm requires a constraint handling method for tackling them. For this purpose we have selected 6 formerly developed constraint handling methods for adapting into WSA algorithm and analyze the effect of the used constraint handling method on the performance of the WSA algorithm. In other words, we have the aim of producing concluding remarks over the performance and robustness of the WSA algorithm through a set of computational study in solving the constrained global optimization problems. Computational study indicates the robustness and the effectiveness of the WSA in terms of obtained results, reached level of convergence and the capability of coping with the problems of premature convergence, trapping in a local optima and stagnation.     

Liquid Marble Patchwork on Super-Repellent Surface

Liquid marble (LM) is a droplet that is wrapped by hydrophobic solid particles, which behave as a non-wetting soft solid. Based on these properties, LM can be applied in fluidics and soft device applications. A wide variety of functional particles have been synthesized to form functional LMs. However, the formation of multifunctional LMs by integrating several types of functional particles is challenging. Here, a general strategy for the flexible patterning of functional particles on droplet surfaces in a patchwork-like design is reported. It is shown that LMs can switch their macroscopic behavior between a stable and active state on super-repellent surfaces in situ by jamming/unjamming the surface particles. Active LMs hydrostatically coalesce to form a self-sorted particle pattern on the droplet surface. With the support of LM handling robotics, on-demand cyclic activation–manipulation–coalescence–stabilization protocols by LMs with different sizes and particle types result in the reliable design of multi-faced LMs. Based on this concept, a single bi-functional LM is designed from two mono-functional LMs as an advanced droplet carrier.     

Occurrence and diversity of Listeria spp. in seafood processing plant environments

Listeria contamination in processing plant environments is a major issue for the seafood industry worldwide; faster and more reliable results are therefore desired for early detection and monitoring of environmental Listeria spp. This study aimed to gain a better understanding of the prevalence and diversity of Listeria spp., and to evaluate a rapid detection method, the 3M Molecular Detection Assay (MDA) Listeria, for its ability to detect Listeria spp. in environmental samples from seafood processing plants. Duplicate environmental sponge samples (n = 444) were collected from 152 different sites within three seafood processing plants, and analyzed for Listeria spp. by the MDA method (after 26 and 48 h of enrichment) and the U.S. Food and Drug Administration Bacteriological Analytical Manual method. Overall, detection of Listeria spp. by the two methods did not differ significantly (p > 0.05); 11 (4.9%) and 13 (5.9%) samples were positive for Listeria spp. by the MDA and FDA-BAM method, respectively. The sensitivity of the MDS was 87.0% (95% CI: 77.4–96.6%), specificity was 97.6% (95% CI: 95.5–99.7%), accuracy was 95.3%, and the positive predictive value was 89.4% (95% CI: 80.5–98.2%). Classification of 19 Listeria isolates by partial SigB sequencing analysis identified three allelic types. Twelve of these isolates were ATs 58 and 60 which were classified as Listeria monocytogenes lineage I and serotypes 1/2b, 3b, 4b, 4d, 4e, by multiplex-PCR serotyping. Six Listeria isolates were classified as Listeria innocua (AT31). Our data show that the 3M Molecular Detection Assay Listeria provides rapid and reliable results for detection and monitoring of Listeria spp., which are important for seafood processing plants. Effective Listeria monitoring programs will allow for improved development of Listeria control measures in order to minimize cross-contamination in finished products.     

Survey of domestic food purchases and related home handling practices in the Abruzzo region (central Italy): Data collection and analysis through a language-independent classification system

A telephone survey was carried out on 13,486 randomly selected households located in the Abruzzo region (central Italy). Three questionnaires were specifically designed in relation to three different groups of foods (Meat and meat products, Fishery products, Fruit and vegetables). Questions were mainly focused on the amount and number of purchases, type of retailer, and home food handling practices with respect to the week prior to the interview. Data were classified according to a multilingual thesaurus system (LanguaL). Results allowed to estimate domestic purchases (in kg) per capita for different food categories. The category “Red meat/Cattle” accounted for a large part of purchases in the “meat and meat products” group (10.9 kg per capita/year; 32.2% of purchases in the group) while the category “Fish or related organism/Fish” was the most purchased in the “fishery products” group (6.9 kg per capita/year; 63.3%). The aggregation of more detailed characteristics enabled the identification of popular categories of foods, such as “Red meat/Cattle/Divided into pieces” (25% of the “meat and meat products” group). Significant differences (p < 0.05) were found between the four different provinces (L'Aquila, Chieti, Pescara and Teramo) with respect to “Poultry/Chicken” and “Red meat/Cattle” categories. Householders were also asked about post-purchase food handling practices that might be hazardous to food safety. More than 20% of those surveyed stated that they thawed frozen meat at room temperature. The degree of doneness after cooking of different food categories was generally high: over 90% of products purchased in the majority of meat and fish categories were properly cooked. However a noticeable proportion of householders (about 15%) reported medium or rare cooking of “Red meat/Cattle” and “Red meat/Swine”. Differences (p < 0.05) were also found between consumers of different ages, with people over 65 years old being more prone to freeze meat and cook it thoroughly.The survey was carried out in a specific geographic area and on a statistically significant sample of households, thus allowing a collection of data on domestic habits relating to food purchases and home food handling practices. This information should be included in the framework of quantitative microbial risk assessment (QMRA) models as a measure of the actual exposure of consumers to pathogenic microorganism. The LanguaL system also proved to be a practical language-independent method useful not only to identify and describe food items but also to classify them according to specific food safety characteristics.     

灰色预测模型在油气操作成本预测中的应用

油气操作成本是油气田生产消耗的主要项目，为了有效地控制油气操作成本，必须制定准确的油气操作成本计划。而油气操作成本在我国是最近几年才提出来的，数据项比较少，给油气操作成本预测带来一定的难度。为此，文章根据灰色预测的基本原理，采用灰色系统理论进行油气操作成本预测，就可以弥补对预测所需的数据少，而且也无须剔除不可比因素，只要所建模型能满足精度要求，预测结果就可以信赖。     

编译错误的一种处理策略

本文提出了一种独特的编译错误处理方法，其特点是将错误信息组成一个独立的文件。     

Specification methods for material-handling control algorithms in flexible manufacturing systems

Good methods are needed to specify, test, and debug material-handling control logic. This article surveys a number of representative methods for defining and describing control algorithms for programmable material-handling equipment used in flexible manufacturing systems. The methods are evaluated with regard to their suitability for communication between people and as bases for interfaces to automatic program generators. It is concluded that no single method is entirely satisfactory. Three methods (position diagrams, function block diagrams, and operation networks) have potential to be combined into an effective hybrid approach that minimizes the need for the user to switch between various conceptual models.     

Facility layout problems: A survey

Layout problems are found in several types of manufacturing systems. Typically, layout problems are related to the location of facilities (e.g., machines, departments) in a plant. They are known to greatly impact the system performance. Most of these problems are NP hard. Numerous research works related to facility layout have been published. A few literature reviews exist, but they are not recent or are restricted to certain specific aspects of these problems. The literature analysis given here is recent and not restricted to specific considerations about layout design.

We suggest a general framework to analyze the literature and present existing works using such criteria as: the manufacturing system features, static/dynamic considerations, continual/discrete representation, problem formulation, and resolution approach. Several research directions are pointed out and discussed in our conclusion.     

HTR-10燃料元件装卸系统冷态调试

10MW高温气冷实验堆（HTR－10）是一座球床堆，由燃料元件装卸系统实现燃料元件的装卸和循环，且不需要停堆，为保证HTR－10的正常运行，燃料元件装卸系统必须安全，可靠，为此，必须对燃料元件装卸系统进行周密，细致的调试试验和验证，本文介绍了燃料元件装卸系统冷调试的主要调试项目，调试方法和调试结果。     

An on-line microcomputer-based respiratory monitor for manual materials handling

The main objective of the present study is to develop a low cost microcomputer-based respiratory system that is capable of computing the oxygen consumption and minute ventilation of individuals engaged in manual materials handling on an on-line basis. The design, specifications, and merits of the system are given. The software package developed was written in assembly language for the IBM AT personal computer.