焊膏工艺性要求及性能检测方法

焊膏是SMT工艺中不可缺少的钎焊材料,广泛应用于再流焊中;它是由一定的合金粉末和助焊剂均匀混合而成的膏状体。主要对SMT中焊膏的组成及焊膏性能检测方法进行了简要分析。     

固定电子分立元器件用胶粘剂E—4X的研制

介绍了一种不同于灌封材料，具有触变性，粘接性能优良，使用方便的固定电子分立元器件用胶粘剂Ｅ－４Ｘ。与国外同类产品Ｅｐ－４３３ｘ胶粘剂对比，其综合性能优于Ｅｐ－４３３胶粘剂。     

剪切速率和静置时间对Fe-Al-Mg-MMH/钠质蒙脱土复合触变性体系触变性的影响

研究了测定条件对R=0.051的Fe-Al-Mg型混合金属氢氧化物(简称MMH)/钠质蒙脱土(简称MT)复合触变性悬浮体性质的影响.主要考察了高速剪切分散后,测定粘度(η)随时间(t)变化时采用的剪切速率(DL)和测定η前的静置时间(ts)的影响发现DL和ts的影响很复杂,ts=0,低DL时(10和170s-1)呈现复合触变性的体系,在高DL时(340、511和1022s-1)可呈现正触变性;DL增加,体系η逐渐降低.在所研究的ts范围内(0～2h),随ts的增加,体系分别由低DL时(10和170s-1)的复合触变性和高DL时(340、511和1022s-1)的正触变性皆转变为负触变性.低DL时(10和170s-1),η随ts逐渐降低;高DL时(340、511和1022s-1),η随t逐渐增高.对影响机理进行了初步探讨.     

S—94触变性不饱和聚酯树脂的制备和开发

在基体树脂中添加触变剂白炭黑，制成了Ｓ－９４触变性不饱和聚酯树脂。该树脂的触变指数比基体树脂高３倍多，改善了不饱和聚酯树脂的流变性。     

具有高粘度分散相的油-水分散体系的液滴破碎与粒径分布研究

对湍流搅拌槽中原油-水分散体系的液滴破碎进行了研究。在不同的温度下原油表现出不同的流变学特征，对分散过程中的液滴破碎产生不同的影响。实验研究对比了不同温度下原油-水分散体系的液滴分布及最大稳定粒径，分析了触变性对破碎过程及最大稳定粒径的影响。经过模型计算与实验结果比较，发现以初始粘度计算的理论值预测最大稳定粒径更为合适。     

Stability of Freeze-Dried Tablets at Different Relative Humidities

The purpose of the study was to evaluate the stability of two different freeze-dried tablet formulations at different relative humidities (RHs). The tablets contained 25 mg hydrochlorothiazide (HCT) as a model drug and were prepared by freeze-drying a suspension and an oil-in-water (o/w) emulsion. Formulation A was a rapidly disintegrating tablet and consisted of 80 mg of maltodextrine DE38; 8 mg of polyethyleneglycol (PEG 6000), 8 mg of xanthan gum, and 25 mg of HCT. Formulation B was a lyophilized dry emulsion tablet that consisted of 160 mg of Miglyol^® 812, 80 mg of maltodextrin DE38, 16 mg of methylcellulose (Methocel^®) A15LV, and 25 mg of HCT. Tablets were packaged in different packing materials: polyvinylchloride (PVC)/aluminum blister packs, PVC-polyvinylidenechloride (PVDC)/aluminum blister packs, closed containers with a dessicant tablet, and open containers. The tablets were stored at three relative humidities (45%, 60%, and 85% RH) and were characterized on mechanical strength, residual moisture, porosity, content uniformity, and scanning electron microscopy (SEM) during a period of 6 months. After 1 month at 60% and 85% RH, a strong increase in moisture content (from 2.7% to 6.8%) was seen for the tablets packed in the open and closed containers and for the PVC/aluminum blistered tablets. This increase was higher for formulation A compared to formulation B since B contained 160 mg of triglycerides and was more hydrophobic. This increase in water content was correlated with a decrease in mechanical strength. The tablets also showed a change in microstructure and porosity. At a moisture content of 7.2%, formulation A showed a structural “collapse” since water acts as a plasticizer for the amorphous glass, lowering the glass transition temperature T_g. This phenomenon even occurred in PVC/aluminum blister packs at 85% RH. The structural collapse was associated with a complete loss of microstructure as detected by porosimetric analysis and SEM. For the PVC-PVDC/aluminum blistered tablets, the increase in moisture content and decrease in mechanical strength at 85% RH occurred much slower, and the water uptake and strength loss were less intensive. No significant breakdown of HCT could be observed in both formulations with all of the packing materials. Packaging of freeze-dried tablets with PVC/aluminum blister packs, PVC/PVDC/aluminum blister packs, or closed containers did not offer protection against moisture uptake, mechanical strength loss, and structural collapse.     

Rheokinetic model to characterize the maturation process of gelatin solutions under shear flow

The characterization of maturing gelatin solutions in shear flow is required for an appropriate formulation of food products. Under static conditions, the maturation process of gelatin solutions may be described through a basic structural parameter evolving to the percolation value (gel point). Within the rheological framework, two asymptotic viscosities are well identified for the maturing process of gelatin solutions at the limit zero shear rate. One involves the initial solution viscosity that may be associated with the null structural parameter (the microstructure is not formed yet). The other is the percolation zero shear rate viscosity (assuming an infinite value when approaching the gel time) and corresponds to the maximum value of the structural parameter. Under flow, thixotropic theories combined with the knowledge of suspension rheology allow one to convert directly experimental data obtained as shear stress versus time for a given shear rate into the time evolution of the structural parameter. Consequently rheometric experimental data available places the search for a rheokinetic model of the structural parameter. Here, different expressions for this model are investigated, mainly those involving both the rates of structure breakdown and buildup, where the average cluster size is affected by the shear rate. The rate equation thus obtained may be then applied to arbitrary shear rate histories. Numerical results of the rheokinetic model proposed in this work fit well experimental rheometric data obtained in shear flow for the maturing of different gelatin solutions. Experimental data acquired in this work are presented and discussed in relation to those reported previously in the literature.     

压裂用疏水缔合聚合物溶液性质及减阻性能研究

摘要：以一种功能性疏水单体与丙烯酰胺（AM）、丙烯酸（AA）和2-丙烯酰胺-2-甲基丙磺酸（AMPS）为原料,合成了一种疏水缔合聚合物HAWP-18。采用流变仪考察了疏水缔合聚合物HAWP-18的耐剪切性能、黏弹性及触变性,结果表明,HAWP-18属于假塑性流体,临界缔合浓度为2.31g/L,表现出较强的耐剪切性能;黏弹性测试表明,HAWP-18是典型的黏弹性结构流体,具有较宽的线性黏弹区,该体系的储能模量G''大于损耗模量G'',并且黏度越大,弹性特征越强;采用稳态剪切测试研究了不同质量浓度HAWP-18的剪切应力与剪切速率的关系,HAWP-18具有触变性,并且触变性随质量浓度增大而增强;使用自制摩阻测试仪测定了不同质量浓度HAWP-1的减阻性能,结果表明,HAWP-18减阻率随质量浓度的增加先上升后降低。HAWP-18的耐剪切性及其良好的黏弹性、触变性和减阻性能为其应用于压裂液提供了实验支撑。     

四氨酯化合物的合成及其对液体双酚A环氧树脂的流变控制及固化性能的影响

利用羟基(-OH)和异氰酸酯基(-NCO)的简易反应合成了含4个氨酯键(-NHCOO-),两端基为十六碳烷链(-C16H33)的四氨酯化合物,并用作液体双酚A环氧的流变改性剂。利用傅里叶红外(FTIR)、差示量热扫描仪(DSC)、偏光显微镜和扫描电镜(SEM)对四氨酯化合物及其环氧复配物进行了表征分析。通过流变仪、动态力学分析仪(DMA)及万能试验机等对环氧复配物的流变性及其固化物性能进行了研究。结果表明,四氨酯化合物借助氢键作用和范德华力可在液体环氧基体中自组装形成合适及可控的分子聚集体形态,从而实现对液体环氧复配物流变性的有效控制。5%的四氨酯化合物可使环氧复配物拥有与含10%工业用气相二氧化硅(RY200)的环氧复配物一样的触变性。同时,四氨酯化合物的相变特性使其环氧复配物的流变性具有热可逆性。另外,环氧固化性能受四氨酯化合物影响较小。     

触变型堵剂GX—I封堵大孔道技术的研究及应用

用一种工业无机胶结材料、固化剂（混合无机盐溶液）及触变性调节剂（复合无机物）配制成了具有明显触变性的堵剂浆液GX－I。详细考察了各个组份的用量对浆液初凝时间、触变性（以浆液静切力G10s和G10min表示）、流变性及固结体抗压强度的影响。得到了分别适用于封堵低温井大孔道、裂缝及封堵水泥环以上套漏（无机材料用量以水灰比表示W／C＝0.44-0.5),封堵较高井温油井出水层（W／C＝0．67－1．0）,水井调剖（W／C＝1．2－1．4）的GX－I堵剂。给出了可用于60－90℃、初凝时间为6－10小时的3个基本配方。用这3个配方堵剂浆液堵岩心,堵塞率＞97％。简要介绍了中原油田11口井使用GX－I堵剂的良好效果,包括层间封窜2口,堵套漏1口,油井堵水3口,注水井分层调剖5口,详细分析了封堵1口注水井管外窜槽情况。