Analysis of suitability of TPP ash-slag waste as materials for hydrogen fuel storage

The current trends in energy were described, the main of which is the use of alternative energy sources, especially hydrogen. The most common methods of hydrogen accumulation were proposed: accumulation of compressed gaseous hydrogen in high-pressure tanks; accumulation of liquid hydrogen in cryogenic tanks; storing hydrogen in a chemically bound state; accumulation of gaseous hydrogen in carriers with a high specific surface area. Based on the combination of advantages and disadvantages, the most promising methods of accumulation were selected: storage of liquid hydrogen and storage of hydrogen in carriers with a high specific surface area. The main requirement for materials for hydrogen storage by these methods was revealed – a high specific surface area. Prospects for the development of waste-free low-emission technologies due to the recycling of secondary raw materials and the development of low-temperature technologies for the synthesis of functional and structural materials were substantiated. The applicability of large-scale ash and slag waste from coal-fired thermal power plants as a raw material for obtaining materials by low-temperature technologies was shown. The traditional ways of using ash and slag waste as a raw material, active additive and filler in the production of cements were described. Modern technologies for the production of innovative materials with a unique set of properties were presented, namely carbon nanotubes, silica aerogel and geopolymer materials. The prospect of using geopolymer matrices as a precursor for the synthesis of a number of materials was described; the most promising type of materials was selected – geopolymer foams, which are mainly used as sorbents for purifying liquids and gases or accumulating target products, as well as heat-insulating materials. The possibility of obtaining products of any shape and size on the basis of geopolymer matrices without high-temperature processing was shown. The special efficiency of the development of the technology of porous granules and powders obtained from a geopolymer precursor using various methods was substantiated. The obtained granules can be used in the following hydrogen storage technologies: direct accumulation of hydrogen in porous granules; creation of insulating layers for liquid hydrogen storage units.     

Temperature cycling and its effect on mechanical behaviours of highporosity chalks

Temperature history can have a significant effect on the strength of water-saturated chalk.In this study,hydrostatic stress cycles are applied to understand the mechanical response of chalk samples exposed to temperature cycling between each stress cycle,compared to the samples tested at a constant temperature.The total accumulated strain during a stress cycle and the irreversible strain are reported.Chalk samples from Kansas(USA)and Mons(Belgium),with different degrees of induration(i.e.amount of contact cementation),were used.The samples were saturated with equilibrated water(polar)and nonpolar Isopar H oil to quantify water weakening.All samples tested during 10 stress cycles with varying temperature(i.e.temperature cycled in between each stress cycle)accumulated more strain than those tested at constant temperatures.All the stress cycles were performed at 30℃.The two chalk types behaved similarly when saturated with Isopar H oil,but differently when saturated with water.When saturated with water,the stronger Kansas chalk accumulated more total strain and more irreversible strain within each stress cycle than the weaker Mons chalk.     

TUD-DNS3脱硝助剂在催化裂化装置的工业应用

TUD-DNS3脱硝助剂在中韩（武汉）石油化工有限公司1号催化裂化装置上进行了工业应用。结果表明：针对两段再生工艺，当系统中助剂占总催化剂藏量的质量分数为2.6%时，烟气脱硫装置外排污水中的氨氮质量浓度由加剂前的100 mg/L下降至40 mg/L以内；助剂的加入降低了CO焚烧炉的炉膛温度，有利于烟气的合格排放，并对装置操作、产品分布及汽油、柴油产品质量无不良影响。     

黄海地质构造与油气资源

针对以往黄海油气勘探在找油思路、勘探深度、勘探领域、勘探部署和勘探技术等方面存在的问题 ,概述了南、北黄海地质构造、盆地演化、油气地质特征及成藏条件 ,并在此基础上 ,提出了对黄海油气资源远景的几点认识     

乘累加运算器的高性能解决方案

在设计数字信号处理器时我们经常要设计高性能的乘累加运算器，文章详细分析了乘累加运算器的结构，提出了其高性能设计方案并采用标准单元进行了实现，同时提出了DCT运算单元的高性能解决方案。     

井场信息系统建设体系结构

对井场钻井数据实时远程传输的研究和实践进行了总结,从数据远传作用、数据远传通信方式、数据通信网络体系结构、未来发展等几个方面对井场数据远程传输进行了探讨。     

BEM 系列原油流动性改进剂的应用

对BEM系列原油流动性改进剂的基本原理以及在中洛、濮临、东临、东黄、鲁宁、魏荆等几条原油长输管道工业应用的现场测试情况进行了介绍。结果表明，BEM系列原油流动性改进剂在降低原油凝点和粘度方面性能良好，能满足管道安全，平稳运行的要求。     

石油测井仪器可靠性指标探讨

在分析常用可靠性指标及其应用现状的基础上，根据可靠性理论及石油测井仪器的特点。提出了石油测井仪器的可靠性模型。在探讨常用可靠性指标对石油测井仪器适用性的同时，提出将平衡稳定工作时间NWTURE和免维修测井井次NOLWNM作为石油测井仪器可靠性指标的思想；探讨了获取可靠性指标的途径。给出了推荐使用的石油测井仪器可靠性指标。     

石油工程项目管理机制

为了妥善处理石油工程项目中的委托-代理关系,研究了委托-代理模型和石油工程项目管理中的激励约束机制,分析了激励机制、监督机制和选择机制在石油工程项目运行管理中的重要性.只有用有效的契约去激励技术服务公司,才能使服务公司在追求自身效益最大化的同时也为实现石油公司的最大效益而尽最大努力;只有对技术服务公司的作业实施监督,才能形成对技术服务公司的有效约束;采用激励性承包方式、实施综合性评标和组建工程项目动态联盟能够防止逆向选择.分析表明,在最优激励安排下,激励强度与项目面临的不确定性、承包商的边际成本及其风险规避系数负相关,与承包商的边际生产率正相关,还与其他可观测变量相关.在最优监督水平下,作业公司的边际生产率越高,边际成本越低,越容易监督,监督带来的边际收益越高.对于那些监督比较困难的项目,可以通过加强惩罚力度的方式弥补难以有效监督的不足.激励性承包方式可以减小逆向选择造成的危害,组建动态联盟可以进一步加强激励作用,降低道德风险,解决逆向选择问题.参8