Alumina-supported catalysts for propane oxidative dehydrogenation from mixed VXM(6−X)O19 (M=W, Mo) hexametalate precursors

γ-Al₂O₃ supported vanadium oxides were modified by tungsten and molybdenum oxides in order to improve dispersion and selectivity towards olefins in propane oxidative dehydrogenation (ODH). Both vanadium–tungsten and vanadium–molybdenum catalysts were obtained by adsorption of mixed isopolyanions (VW₅O₁₉⁵⁻, V₂W₄O₁₉⁴⁻, VMo₅O₁₉⁵⁻ and V₂Mo₄O₁₉⁴⁻) from aqueous solutions. The isopolyanion solutions were characterized by UV-Vis and ⁵¹V NMR spectroscopy. Vanadium, vanadium–tungsten and vanadium–molybdenum precursors and catalysts were also characterized by UV-Vis (diffuse reflectance) and solid state ⁵¹V NMR spectroscopy. An improved selectivity to propene in the presence of tungsten and molybdenum in VO_x/γ-Al₂O₃ was observed and attributed to dilution of vanadium by tungsten or molybdenum oxides on the γ-Al₂O₃ surface.     

天然气中甲烷和乙烷直接转化制乙烯

天然气中的甲烷和乙烷可以同时在Ｎａ２ＷＯ４－Ｍｎ／ＳｉＯ２催化剂上得到活化生成乙烯。在甲烷转化率为２０％时，原料甲烷氧化偶联反应生成Ｃ２＋的选择性为～８０％，原料乙烷反应的转化率为～８５％，选择性为～７０％。     

丙烷氧化脱氢反应催化剂体系研究进展

综述了丙烷氧化脱氢制丙烯反应催化剂体系及其主要研究结果。     

Ni-Mo-O催化剂中协同作用对丙烷氧化脱氢的影响

在 Ni-Mo-O体系中 ,加入 Mo O3 能极大地提高丙烷氧化脱氢制丙烯的反应活性。选用固混法、沉淀法、柠檬酸法制备了 Mo O3 过量 1 5 % (摩尔分数 )的α -Ni Mo O4催化剂 ,其中用沉淀法制得催化剂在 5 0 0℃ ,V( C3 H8) /V ( O2 ) /V ( N2 ) =1 0 /1 0 /5 0 ,反应气流量为 70 m L/min的条件下丙烷转化率可达 38.7% ,丙烯选择性达 70 .1 4 %。经 XRD,XPS,TPR表征说明 ,在含有过量 Mo O3 的催化剂中 ,α -Ni Mo O4与 Mo O3 两种晶体之间可产生微小的相互吸引 ;从而发挥协同作用 ,是提高催化剂活性     

CONSTITUTE AND PROPERTY OFα-Ti AFTER HYDRIDING TREATMENT

研究了氢化处理对退火α-Ti 板材的组织、结构及性能的影响。α-Ti 在室温出现两种结构的氢化物:有序的fctγ相(TiH)和fccδ相(TiH_2)。分析了用X 射线衍射只查觉到δ相的原因。氢化物的数量及形态影响除氢后基体的晶粒组织。控制氢含量可以改善拉伸性能及疲劳性能。     

The effect of support morphology on the reaction of oxidative dehydrogenation of ethane to ethylene at short contact times

The oxidative dehydrogenation of ethane is carried out in short contact time reactors over Pt and LaMnO₃ based catalysts supported on a large number of different ceramic substrates (45, 60 and 80 ppi foam monoliths and 200, 400, 600, 900 and 1200 cpsi honeycomb monoliths). Experimental results, obtained under the same conditions at varying the C₂H₆/O₂ ratio, showed that the highest performance in terms of ethylene selectivity and yield is always attained on LaMnO₃ catalysts. Furthermore, the results are significantly influenced by the morphology and cell density of the support, with 45 and 60 ppi foams and 400 and 600 cpsi honeycombs giving the best performance. The experimental results are explained by means of geometrical and fluid dynamic considerations on the support, and by means of a 2D mathematical model, which clearly indicates an optimal intermediate cell density for maximising ethylene selectivity and yield.     

Propane conversion over zeolite catalysts: Comments on the role of Ga

The activation of propane using zeolite H-Y and Ga³⁺ exchanged zeolite Y indicates that in the presence of Ga³⁺ the mechanism of propane activation is changed from a cracking pathway to a dehydrogenation pathway. The presence of both Ga³⁺ and H⁺ are required to achieve this effect.     

丙烷催化脱氢制丙烯Pt系催化剂研究进展

综述了近年来国内外主要的丙烷脱氢制丙烯工艺技术现状，详细介绍丙烷在Pt系催化剂上脱氢的反应机理、载体及助剂，简介了其他丙烷催化脱氢催化剂存在的问题及化学链脱氢技术的优势。不断优化Pt系催化剂，降低成本。减少催化剂中Pt含量的同时提高催化剂的稳定性以及开发非铂非铬环保型脱氢催化剂是今后的主要研究方向。     

铂系低碳烷烃脱氢催化剂研究进展

综述了近年来国内外铂系低碳烷烃脱氢催化剂的技术现状与研究进展。首先从热力学角度论述了低碳烷烃脱氢反应与相关副反应的反应机理,随后分别从活性位点性能与催化脱氢的关系,氧化铝、分子筛等载体的作用,以及锡、碱金属、碱土金属、过渡金属等助剂改性对催化剂的影响等3个方面分析了铂系低碳烷烃脱氢催化剂的优势与存在的问题,进而探究了铂系脱氢催化剂的失活原因。最后对铂系脱氢催化剂的研究前景做了展望,提出该系列催化剂的主要发展方向包括降低贵金属铂的负载量、提高催化剂的稳定性、减少积炭副反应等。     

甲乙苯脱氢催化剂的研制

本试验研制的F—601甲乙苯脱氢非铬催化剂具有较高的活性和较好的选择性、用于间、对—甲乙苯脱氩,在640℃单程收率可达39.96％,用于对—甲乙苯脱氢,在620℃单程收率可达46.64％,640℃时可达48.29％。选择性均大于90％。