Effect of cellulose acetate/cellulose triacetate ratio on reverse osmosis blend membrane performance

Surface functionalization and modification including the grafting process are effective approaches to improve and enhance the reverse osmosis (RO) membrane performance. This work is aimed to synthesize grafted/crosslinked cellulose acetate (CA)/cellulose triacetate (CTA) blend RO membranes using N-isopropylacrylamide (N-IPAAm) as a monomer and N,N-methylene bisacrylamide (MBAAm) as a crosslinker. The morphology of these membranes was analyzed by scanning electron microscopy and their surface roughness was characterized by atomic force microscopy. The performance of these membranes was evaluated through measuring two major parameters of salt rejection and water flux using RO unit at variable operating pressures. It was noted that the surface average roughness obviously decreased from 148 nm for the pure CA/CTA blend membrane with 2.5% CTA to 110 nm and 87 nm for the grafted N-IPAAm and grafted/crosslinked N-IPAAM/MBAAm/CA/CTA-RO membranes, respectively. Moreover, the contact angle decreased from 51.98° to 47.6° and 43.8° after the grafting and crosslinking process. The salt rejection of the grafted CA/CTA-RO membrane by 0.1% N-IPAAm produced the highest value of 98.12% and the water flux was 3.29 L/m²h at 10 bar.     

新的载体媒介传递膜

总结了近几年研究和发展的几种载体媒介传递膜。与支撑液膜相比，这些膜具有好的稳定性和长的寿命。对某些物质，如重金属离子、小分子中性碳氢化合物、氨基酸等有高的选择性和通量。它们的传递机理为固定位置跳跃或移动和固定载体2种机理结合。这些研究有望在环境、生物等技术领域中应用。     

复合固体超强酸SO42-/ZrO2-TiO2催化合成三醋酸甘油酯

采用复合固体超强酸SO₄^2-/ZrO₂-TiO₂为催化剂，甘油和冰醋酸为原料，结合醋酸精馏回流工艺，合成了三醋酸甘油酯（TCG）。通过对合成工艺改进，免除了有毒带水剂的使用。使TCG合成更安全，更经济和环保。催化剂制备和TCG合成最佳工艺条件为：硫酸浸渍液浓度（0.5～0.55） mol·L^－1，焙烧温度（550～600） ℃，催化剂用量（占总投料量质量分数）2.5％～3.0%。投料比n（甘油）∶n（醋酸）=1∶ 5.5，反应温度130 ℃，反应时间3.0 h，产品收率达92.6%，催化剂可重复使用6次，易于再生。     

热塑性淀粉／聚己内酯共混物的制备和性能的初步研究

利用热塑性淀粉（TPS）与聚己内酯（PCL）熔融共混并挤出可用来制备完全可生物降解的塑料，研究表明，组分PCL以及增塑剂水和甘油的含量对体系的力学性能和耐水性有显著的影响。     

Structural analysis of cellulose triacetate polymorphs by two-dimensional solid-state C-C and H-C correlation NMR spectroscopies

For the elucidation of the crystal structures of the two crystalline allomorphs of cellulose triacetate (CTA), namely CTA I and CTA II, two-dimensional (2D) solid-state through-bond ¹³C-¹³C and ¹H-¹³C correlations NMR techniques applied to the two crystalline allomorphs of CTA. As a result, the ¹³C and ¹H chemical shifts of the glucopyranose ring of CTA I and CTA II were completely assigned by the 2D NMR spectra of these allomorphs. On the 2D ¹³C-¹³C correlation spectrum of CTA II, two sets of the ¹³C-¹³C correlations from C1 to C6 were observed. This indicated that the CP/MAS ¹³C NMR spectrum of CTA II can be characterized by its overlapping of the ¹³C subspectra of two kinds of 2,3,6-triacetyl-anhydroglucopyranose units and that there are two magnetically non-equivalent sites in the unit cell of CTA II. In the case of CTA I, the numbers of respective ¹³C and ¹H shifts of CTA I agreed with the those of the glucopyranose residue in the allomorph, strongly suggesting that the asymmetric unit of CTA I is only one glucose residue. In addition, conformational differences in the exocyclic C5-C6 bonds between CTA I and CTA II were strongly suggested by the notable differences in the ¹H and ¹³C chemical shifts at the C6 sites of these allomorphs.     

含多羟基功能基树脂的合成及其与硼酸螯合性能的研究

合成了数种含有多羟基醇单醚功能基的树脂，研究了反应条件及树脂的吸附性能。     

N-十六烷基乙二胺三乙酸钠的合成及性能

用无水乙二胺、1-溴-十六烷和氯乙酸为原料,合成N-十六烷基乙二胺三乙酸钠,以提高阴离子表面活性剂在硬水中的稳定性。性能研究表明:它在硬水中的稳定性达到4级,cmc为2 13mmol·dm-3,γcmc=34.7mN·m-1。对产物的润湿力、分散力、乳化力等其他性能也进行了研究。     

新型辛内酯奶味香精的合成及结构表征

1-甲基-2-氧代-3,6,7-三氧杂二环[2,2,2]辛烷是一种辛内酯类笼状化合物,具有乳脂味,可作为一种价格便宜的新型奶味香精用于食品中.采用丙酮酸和丙三醇为原料直接合成1-甲基-2-氧代-3,6,7-三氧杂二环[2,2,2]辛烷.以丙酮酸转化率为指标,研究了反应时间、催化剂用量、醇酸物质的量的比和反应温度对其合成的影响,通过液液萃取和重结晶获得其晶体,并采用核磁共振和红外光谱对目标产物进行表征.结果显示在反应时间4 h,催化剂用量为丙三醇和丙酮酸总质量的2.0%,醇酸物质的量的比为4∶1,反应温度为55℃时,丙酮酸转化率达到58%.     

生物柴油副产物下层甘油液的组成分析及其分离

分析了菜籽油和大豆油碱催化酯空换法制备生物柴油副产物下层甘油液的主要成份。下层甘油液中主要古甘油、甲醇和脂肪酸皂以及少量的脂肪酸甲酯和游离碱。探索了分离方法。获得的甲醇和脂肪酸可用于生物柴油生产和其它产品的原料，获得的甘油音量达到分析纯要求。     

氨三乙酸钠无磷催化剂在BTCA防皱整理中的应用

研究了氨三乙酸钠（SAT）作为无磷催化剂用于丁烷四羧酸（BTCA）酯化交联棉织物的服用性能。确认其有效性，并通过正交试验确定的最佳工艺方案为：培烘温度为190℃；氨三乙酸（ATA）与氢氧化钠的摩尔比为1：2.5；氨三乙酸浓度为1.5％；焙烘时间为2min。分析其折皱回复角（WRA）、断裂强度（BS）和织物白度3个指标，还用傅里叶变换红外光谱、钠熔法氮元素定性分析与阴离子染料染色3种方法对SAT的催化机理进行了探讨。