Probing the early stages of polymerization of ethylene on a model chromium/silica catalyst by Fourier transform infrared spectroscopy

The nature of the interaction of monomer, and the early stages of growth of oligomers of ethylene on a rather more uniform surface of Cr/SiO₂ catalyst than hitherto studied has been investigated by differenceFTIR spectroscopy using C₂D₄ and C₂H₄ as reactants both with and without subsequent treatment of the catalyst with CO andTHF. The active catalyst was prepared by reaction of vapour phase CrO₂Cl₂ with the vicinal hydroxyls of the silica surface. Three distinct kinds of methylene groups were detected. Arguments are given for assigning the peaks at 2935 and 2860 cm^–1 to CH₂ groups directly bound to the active site and those at 2920 and 2850 to CH₂s in the growing chain well removed from the Cr. The peaks at 2160 and 2165 cm^–1 are attributed to CD₂ groups hydrogen bonded to surface hydroxyls.     

不同晶型纳米二氧化锰制备及对亚甲基蓝吸附性能

以高锰酸钾（KMnO₄）为氧化剂、硫酸亚铁铵[（NH₄）₂Fe（SO₄）₂]为还原剂,用水热氧化还原反应制备了层状δ-二氧化锰和隧道型α-二氧化锰纳米材料。用X射线衍射（XRD）、扫描电镜（SEM）和氮气吸-脱附技术对产物的晶型、形貌及孔结构进行了表征。实验结果表明,δ-二氧化锰呈花状微球形貌,具有介孔结构（平均孔径为3.4 nm）,BET比表面积为219 m²/g;α-二氧化锰呈纳米线束形貌,具有部分介孔结构（平均孔径为35.7 nm和154.6 nm）,BET比表面积为26 m²/g。研究了不同晶型纳米二氧化锰对亚甲基蓝的吸附性能。实验结果表明,在相同条件下α-二氧化锰的吸附性能优于δ-二氧化锰,且在碱性环境下吸附效果较好。当反应时间达到120 min时,α-二氧化锰和δ-二氧化锰对亚甲基蓝的去除率分别为84.4%和82.9%。     

Synthesis and biological activity of phthalimide‐based polymers containing 5‐fluorouracil

The attachment of anticancer agents to polymers is a promising approach towards reducing the toxic side‐effects and retaining the potent antitumour activity of these agents. A new tetrahydrophthalimido monomer containing 5‐fluorouracil (ETPFU) and its homopolymer and copolymers with acrylic acid (AA) and with vinyl acetate (VAc) have been synthesized and spectroscopically characterized. The ETPFU contents in poly(ETPFU‐co‐AA) and poly(ETPFU‐co‐VAc) obtained by elemental analysis were 21 mol% and 20 mol%, respectively. The average molecular weights of the polymers determined by gel permeation chromatography were as follows: M_n = 8900 g mol^?1, M_w = 13 300 g mol^?1, M_w/M_n = 1.5 for poly(ETPFU); M_n = 13 500 g mol^?1, M_w = 16 600 g mol^?1, M_w/M_n = 1.2 for poly(ETPFU‐co‐AA); M_n = 8300 g mol^?1, M_w = 11 600 g mol^?1, M_w/M_n = 1.4 poly(ETPFU‐co‐VAc). The in vitro cytotoxicity of the compounds against FM3A and U937 cancer cell lines increased in the following order: ETPFU > 5‐FU > poly(ETPFU) > poly(ETPFU‐co‐AA) > poly(ETPFU‐co‐VAc). The in vivo antitumour activities of all the polymers in Balb/C mice bearing the sarcoma 180 tumour cell line were greater than those of 5‐FU and monomer at the highest dose (800 mg kg^?1). © 2002 Society of Chemical Industry     

Photocatalytic microreactor study using TiO2-coated porous ceramics

Two kinds of porous ceramic disks, having through-holes with diameters of 0.1 and 0.05 mm, were coated with TiO₂ using two different starting solutions: titanyl(IV)acetylacetonate and a commercial titania sol (STS-01). The morphology of these porous ceramics before and after TiO₂ coating was observed by SEM. The TiO₂-coated porous ceramics were examined as honeycomb photocatalytic microreactors. The photocatalytic activity was evaluated using the decomposition of methylene blue solution for radiation angles of 0° and 10° with respect to the pore axis. The highest photocatalytic activity was obtained for the porous ceramic having the pore diameter of 0.1 mm, coated with titanyl(IV)acetylacetonate and irradiated with a light angle of 0° with respect to the pore axis.     

Phase inversion and its effect on the properties of polyester polyurethane cationomers

Polyester polyurethane cationomers are prepared using polyester polyol of molecular weight 2000 as soft segments, N-methyl diethanolamine as chain extender, glycolic acid as quaternization agent, methyl ethyl ketone as solvent, and 4,4'-diphenylenemethylene diisocyanate (MDI) as diisocyanate. Properties of the films cast from solutions and emulsions are studied by infrared spectroscopy, dynamic mechanical analysis, thermogravimetric analysis, differential scanning calorimetry, and tensile-elongation testing. Ionization can cause phase separation and produces increased cohesion in the hard domains. The dispersion process can be divided into three stages involving a separation of hard segment aggregates due to adsorption of water on their surface, water entering into hard segment microionic lattics, and finally a rearrangement of agglomerates to form microspheres. The dispersion can disrupt the order in the hard domains and an increased phase separation.     

活性炭的改性及吸附性能

亚甲基蓝属于噻嗪类染料,脱色较难.分别采用普通浸渍法,超声波浸渍法,将硫酸镁负载到活性炭上,以增强其对亚甲基蓝的脱色和吸附效果.结果表明,用超声浸渍法处理后的活性炭的脱色效果最佳,普通浸渍法次之,它们的脱色率分别达到62.81%和43.51%,未改性活性炭的脱色率仅为33.29%.实验中还发现,超声波改性有助于提高活性炭的吸附容量和吸附速率,改性前后活性炭均遵循Langmuir方程.     

复合材料POSS/TX-10/Bent的制备及其吸附性能

以多面齐聚倍半硅氧烷(POSS)、TX-10型非离子表面活性剂为改性剂对膨润土(Bent)进行复合改性制备了复合材料(POSS/TX-10/Bent),并利用亚甲基蓝研究了其吸附性能。采用XRD、XPS、EA、FTIR、SEM对POSS/TX-10/Bent进行了组成与结构表征。结果表明,POSS和TX-10型非离子表面活性剂都成功插入到膨润土层间,使得复合材料层间距增大,疏水性增强。吸附实验表明,在30℃、pH为6.52(原始值)的条件下,复合材料投加量5 g/L、吸附180 min时效果最佳。在同等吸附条件下,复合改性膨润土对亚甲基蓝的吸附能力远大于未改性的膨润土。吸附过程更符合准二级动力学模型,平衡吸附数据与Langmuir等温吸附曲线吻合较好,吸附是一个自发的吸热过程,POSS/TX-10/Bent对亚甲基蓝的理论最大吸附量为253.81 mg/g。     

地质聚合物微球的制备及对染料的吸附

以偏高岭土和改性水玻璃为原料，采用分散悬浮固化法制备偏高岭土基地质聚合物微球（GM）。使用扫描电子显微镜、比表面积及孔径分布测试仪、傅里叶变换红外光谱仪和X射线粉末衍射仪对其进行结构表征，并研究了GM对亚甲基蓝的吸附性能。结果表明：GM对亚甲基蓝的吸附基本符合准二级动力学模型和Langmuir吸附等温线模型，333 K时最大理论吸附量为100.1 mg/g。GM对亚甲基蓝的吸附是自发吸热过程。使用后的GM在5次循环利用后，GM对MB的去除率仍然可达81.56%，易于回收和再生。分析了GM对不同阴阳离子型染料的吸附效果，结果表明，GM对阳离子型染料具有选择性吸附。GM是一种低价、有效、绿色、可循环利用的吸附剂，可用于去除水中阳离子型染料污染物。     

木质纤维素对水溶液中亚甲基蓝的吸附性能

以木质纤维素为吸附剂,分析吸附时间、初始浓度、pH值、温度等因素对木质纤维素吸附亚甲基蓝阳离子染料的影响.结果表明:木质纤维素对亚甲基蓝吸附300min后达到平衡,初始浓度超过180mg/L后吸附量不再增加,pH值由2增加到8时,吸附量由23.0mg/g增加到40.1 mg/g,温度对吸附量呈现先增大后减小的趋势.讨论...