Microscopic and Macroscopic Growth Rates of Fatigue Cracks in Steels and Alloys under the Influence of Crack Closure

On the basis of the experimental data, we show that the difference between the macroscopic and microscopic fatigue crack growth rates in the second section of the kinetic diagram of fatigue fracture is caused by the effect of crack closure within the limits of its existence. We establish the relationships between the macroscopic and microscopic fatigue crack growth rates and the structure of the material in the second section of the diagram for various values of the load ratio with regard for the effect of crack closure and propose a procedure of examination of the fracture processes in structural materials based on the analysis of microscopic and macroscopic fatigue crack growth rates.     

Highly oriented star-like patterns observed on GaSe epilayers grown on Si(111)

Epitaxial lamellar gallium selenide (GaSe) semiconductors have been grown on trench-patterned silicon (Si) substrates by molecular beam epitaxy. An intriguing star-like patterned morphology was identified by atomic force microscopy on these epilayers. This non-trivial feature can be correlated with the accumulation of stacking faults of two concurrent epitaxial domains around self-oriented triangular pits developed earlier on the Si(111) surface by the chemical etching. Crystallographic considerations show how the stars can be formed.     

Studies on the interactions of metal oxides and Na2 SO4 at 1100 and 1200 K in oxygen

The interaction of different metal oxides such as Co₃O₄, NiO, Al₂O₃, Cr₂O₃, Fe₂O₃ and SiO₂ with Na₂SO₄ at a temperature of 1100 and 1200 K in flowing oxygen has been studied. The thermogravimetric studies for each system were carried out as a function of Na₂SO₄ in the mixture. The presence of different constituents in the reaction products were identified by X-ray diffraction analysis and the morphologies of the reaction products were characterized using metallography and scanning electron microscopy (SEM). The formation of products was also investigated by thermodynamic computation of free energies of the reactions and the study of relevant equilibrium phase diagrams. The soluble species in the aqueous solutions of the reaction products were determined quantitatively using atomic absorption spectrophotometry. The high temperature interaction products usually contain a 3-phase structure namely, Na₂O·M₂O _x , M₂O _x and metal sulphide and/or metal sulphate. The formation of Na₂O·M₂O _x depends upon the solid state solubility of metal oxide in the molten salt at high temperatures. Under limited solubility conditions Na₂O·M₂O _x is invariably formed, but as soon as this condition is relaxed the oxide. M₂O _x , precipitates and forms a separate phase.     

我国钢铁工业发展中存在的问题及对策研究

针对全球经济一体化进程加快，以及中国加入WTO，我国钢铁工业应如何发展，剖析了我国钢铁工业存在的主要问题，分析了制约我国钢铁工业发展的重要影响因素，并在此基础上从宏观、微观的角度提出了我国钢铁工业发展的对策。     

MICP技术改性膨胀土试验研究

为了探究膨胀土新型改良技术,引进微生物诱导碳酸钙沉淀(MICP)新型环保的土体加固技术,利用巴氏芽孢八叠球菌开展MICP压力灌浆改性膨胀土室内试验,研究了胶结液浓度对膨胀土力学性能、微观结构及水理特性的影响,揭示了MICP技术改性膨胀土的作用机理,评价了MICP压力灌浆改性膨胀土试验的效果。试验结果表明:灌浆处理后试样的无侧限抗压强度最大增加了379.4%,土体刚度也有所提高;试样的膨胀性、渗透性均有明显改善,膨胀力最高可减少25.3 kPa,渗透系数最大减少3个数量级;试验改性效果随着胶结液浓度的增大而提高,但当胶结液浓度增大到一定程度后,改性效果不再显著。研究成果验证了MICP技术用于改性膨胀土的有效性和可行性。     

大丝束聚丙烯腈基预氧丝炭化研究

采用正交实验法研究了炭化温度、炭化时间、升温速率等因素对两种聚丙烯腈基预氧丝炭化产物结构和性能的影响.结果表明,进口东邦48 K大丝束聚丙烯腈基预氧丝环化程度优于国产吉林6 K小丝束聚丙烯腈基预氧丝,在炭化温度950℃,升温速率4℃/min,保温时间10 min条件下,炭化可取得最佳性能,炭化产物纤维拉伸强度达2.96 GPa,而国产吉林6 K小丝束在炭化温度1 100℃,升温速率4℃/min,保温时间5 min条件下炭化产物性能最佳,产物炭纤维拉伸强度近3.80 GPa.伴随两种预氧丝炭化过程,纤维颜色加深,表面缺陷减少,拉伸断裂模式均由假塑性向脆性过渡,为复合材料低成本开发中预氧丝坯体制备与炭化工艺提供了参考依据.     

超快平面显微成像技术

快速成像技术在很多领域都有着重要的应用,本文基于超短光脉冲的时-空-频映射原理,提出并实现了一种超快平面显微成像技术。利用色散傅里叶变换及空间色散器件把光脉冲的宽带频谱信息分别映射到时域和空域,利用高速光电探测器进行串行单像素成像,最终获得了帧速率为20.9 MHz,空间分辨率为22 μm和55 μm的一维及二维平面成像系统。在实验中用标准的分辨率目标板验证了成像效果。该技术为超快成像提供了一种有效手段,并将应用于高速平面检测等多个领域。     

Multiple morphologies of self-assembled star aggregates of amphiphilic PEO-b-PNPMA diblock copolymers in solution, synthesis and micellization

Novel amphiphilic block copolymers, poly(ethylene oxide)-b-poly(p-nitrophenyl methacrylate) (PEO-b-PNPMA) with controlled molecular weights and narrow molecular weight distribution were successively synthesized by ATRP of NPMA using PEO-Br as initiator. Self-assembling of the diblock copolymer PEO₁₁₃-b-PNPMA₂₈ in the different solvent mixtures yielded various morphologies of star micelle-like aggregates, such as spheres, vesicles, cauliflower-like aggregates and rod-like aggregates, which are determined by the nature of the common solvents and the selective solvents. Thus the critical selective solvent contents and the solvent contents in PNPMA-rich phase were measured, and they have the following order: ethanol > methanol > water, and THF > CH₃NO₂ > DMSO. The probable self-assembling mechanism is discussed. This method is convenient for preparation of multiple morphological star micelle-like aggregates in solution, especially from the amphiphilic block copolymers with relatively longer block shell.     

用两个形状指数表征粉煤灰颗粒形貌的研究

引用两个形状指数表征颗粒形状的概念,即先将颗粒形状近似为椭圆,再将椭圆图像分离:以圆为基准的颗粒宏观形状指数δ;以光滑椭圆为基准的颗粒轮廓凹凸度,即微观形状指数ζ。分析和发展了近似椭圆模型。并运用图像分析仪对粉煤灰、水泥样品进行实验。结果表明,粉煤灰颗粒的两个形状指数δ和ζ都大于水泥颗粒。证明粉煤灰颗粒的球形度、表面光滑度优于水泥,而且,随着粒径增大,δ和ζ呈下降趋势,表明磨制颗粒越粗。(?)粒形状越不规则。文中还运用近似椭圆模型再现了颗粒的模拟图像。     

镁合金AM60的钨极氩弧焊

探讨了钨极氩孤焊焊接工艺对镁合金AM60接头性能的影响,分析讨论焊缝成形特点、接头组织特征及力学性能．X射线无损探伤分析表明,AM60镁合金TIG焊的焊缝在焊接电流为130A～160A时成形良好,无焊接缺陷;光学金相、SEM分析表明,AM60镁合金TIG焊接头各区域组织都由白色α-Mg相、黑色β相（Mg17Al12）和灰色（β＋Mg17Al12）共晶体组成,AM60断口形貌有明显的韧窝,属于韧断;AM60镁合金TIG焊接头力学性能在150A～160A时综合性能最好,采用不同材料作为填充金属时,与母材成分接近的接头力学性能较好．