Performance of surface ionic conduction single chamber fuel cell prepared by the sol gel method

The performance of surface ionic conduction single chamber fuel cell (SIC‐SCFC) prepared by the sol gel method was studied on electric characteristics due to the differences of the operating temperature and humidity, the electrode distance and electrolyte film depth, and multiple cells with the series and parallel connections. The SIC–SCFC was arranged the both anode of Pt and cathode of Au on the boehmite electrolyte. The open circuit voltage (OCV) of single cell achieved a maximum of 530mV in the dry gas mixtures of O₂/H₂=50% in room temperature operation, and but it became decrease as over 60%. The OCV was maintained the constant value between operating temperatures of 30°C to 80°C, and but it was decreased sharply at over 90°C because a humidity on the cell became lower as increasing operating temperature. Then, the cell property was improved to 120°C by adding to the humidity of 70% using a humidifier. The electrode distance and the electrolyte film depth of SIC‐SCFC found to be contributed to the reductions of the cell resistance and the surface roughness on the electrode, respectively. Moreover, the power property of SIC‐SCFC was significantly improved by cell stacks comprised of the series or parallel connection of a cell.     

伪波阻抗反演在准噶尔盆地永进油田储层描述中的应用

永进油田目的层产状平缓,断层不发育,储层厚度小、埋深大、描述困难。运用伪波阻抗技术对该区的储层进行了研究,取得了较好的效果。     

伪彩色数字高程模型在工业CT断层图像检查中的应用

在工业CT断层图像缺陷检测应用中，提出了将数字高程模型DEM与伪彩色技术一起应用于二维灰度图像缺陷检测领域的算法流程。应用该算法流程，能够充分利用CT断层灰度图像信息，获得清晰的视觉检查效果，从而大大增强了系统检测缺陷的能力。在大型工业CT图像重建与检查分系统中采用该算法流程已经取得了较为理想的效果。     

Spreading Codes Generator for Wireless CDMA Networks

The prime characteristic of spread spectrum modulated signals is that their bandwidth is greater than the information rate. In this way a redundancy is introduced that allows the severe levels of inteference inherent in the transmission of digital information over radio and satellite links to be overcome. Current spread spectrum applications are primarily in military communications; nevertheless, there is growing interest in this technique for third generation mobile radio networks (UMTS, FPLTS, etc.) with open discussion regarding the practicality of using a multiple access system based on spread spectrum techniques (CDMA). However, in order to support as many users in the same bandwidth as other multiple access techniques such as TDMA or FDMA, it is important how to generate large families of sequences that present low cross-correlation. The aim of this paper is to describe a spreading codes generator that can produce a large number of PN sequences with good properties of auto- and cross-correlation. Moreover, the codes generated shows high unpredictability and good statistical behaviour. This also allows the implementation of some features that are common on military networks such as message privacy (increasingly important in commercial networks) without additional cost. The structure presented shows itself to be advantageous for high speed generation of codes at a low cost, low power consumption (allowing longer life for batteries), small size and simplicity of implementation, essential ingredients for commercial equipment. Another attractive feature is its structural parallelism, useful in VLSI implementations. All of these features render it potentially suitable for the implementation of channel bandwidth sharing systems in future wireless personal communications networks.     

频率伪随机捷变引信信号分析

根据频率捷变技术在无线电引信中的应用特点，分析了无线电引信发射频率伪随机捷变引信的信号特征，研究了其模糊函数和信号所携带的目标信息，指出提高无线电引信系统性能的技术途径，为频率捷变引信各种技术方案提供指导。     

An introduction to Wu's method for mechanical theorem proving in geometry

Wu's algebraic method for mechanically proving geometry theorems is presented at a level as elementary as possible with sufficient examples for further understanding the complete method.The work reported here was supported by NSF Grant DCR-8503498.     

影响拟薄水铝石烘干系统产能的成因分析及其改进措施

本文针对拟薄水铝石生产线中的关键环节—烘干系统的设备产能问题进行了分析和技术改造,收到了较好的效果,并为同类生产企业及今后改、扩建工作提供了有益的借鉴。     

无机超细粉体改性锂离子电池隔膜的研究进展

综述了近年来无机超细粉体改性锂离子电池隔膜的研究进展,首先介绍了已在锂电隔膜改性上商业应用的Al₂O₃和AlOOH对传统聚烯烃膜和新型静电纺丝膜的改性方法和改性效果,随后又对常规无机材料TiO₂和SiO₂粉体对锂电隔膜的改性进行了叙述,最后对BN等非常规隔膜改性无机材料进行了简介;总结和讨论了无机材料改性后隔膜的组分、结构和性能对锂离子电池综合性能的影响,并对其无机材料改性锂电池隔膜的未来发展趋势进行了展望。     

铝盐沉淀法制备低堆比假一水软铝石的研究

研究了铝盐沉淀法制备假-水软铝石过程中各因素对水合产物物性的影响规律。提出了制备低堆比的高纯假-水软铝石的方法。用NH4HCO3或(NH4)2CO3溶液做洗涤介质有效降低了假-水软铝石中的杂质含量。采用加入晶种的方法制备了低堆比、含有大孔的假-水软铝石。     

Porous mullite ceramics through diphasic gels of large boehmite and small silica particles

Mullite formation process has been studied in stoichiometric mullite (3Al₂O₃·2SiO₂) diphasic gel containing large boehmite (1 m) and small silica (10 nm) particles. It has been found that initial mullitization did not take place inside the silica phase (cristobalite), but took place in the defect -alumina phase. -alumina was stabilized by silica when the temperature was below 1350°C. At temperatures above 1350°C, mullite crystallized directly. It was suggested that silica diffused into the pores (<1.8 nm) of -alumina and prevented the collapse of -alumina pore structure. On the other hand, when silica was not present, the pore structure of -alumina collapsed and -alumina crystallized at 1100°C. Porous mullite ceramics were obtained by using special diphasic gels containing large boehmite and small silica particles.