大规格圆钢质量分析和控制

针对湘钢棒材厂生产大规格圆钢出现的表面质量问题，重点介绍了在成品轧机后采用U形辊道和立活套替换棍道；冷床输入辊道采用镶WT合金套；增设高压水除鳞装置；中间轧件尺寸精度控制等措施，成功的解决了大规格圆钢表面擦伤、“麻面”、尺寸超差等表面质量问题，产品质量显著提高。     

金刚石薄膜中晶粒尺寸的研究

扫描电子显微研究表明，化学汽相沉积的金刚石薄膜中晶粒大小比较均匀。但随着沉积时间和薄膜厚度的增加，晶粒逐渐变大，且每一层内，存在少量的大金刚石颗粒，讨论了晶粒尺寸变化和大晶粒形成的原因和机制。     

Suitable test structures for submicron ion beam analysis

For the precise determination of the sizes of submicron beam spots test structures with an excellent edge definition are required. For this purpose a semiconductor heterostructure consisting of an 1.62 μm GaInP epi-layer grown on (0 0 1) GaAs has been made, which provides atomically sharp edges for beam spot size measurements. Since the sample has been thinned down by standard transmission electron microscope (TEM) preparation techniques, it can be used for both PIXE and STIM. The sample has been investigated with a TEM and the ion nanoprobe LIPSION. A one-dimensional beam profile in the low current mode was determined by a STIM measurement using 2 MeV protons and yielded a FWHM of (41±4) nm, which is the smallest value reported so far for high energy nuclear micro- and nanoprobes. Furthermore we present nickel nanowhiskers produced at the GSI Darmstadt by electrochemical preparation of etched ion track membranes that have been used to obtain two-dimensional images of the shapes of submicron beam spots. For these measurements a scan over a single nickel nanowhisker having a diameter of 220 nm and a height of about 6 μm was performed.     

Average cluster sizes and cluster size distributions of superfine nickel particles in light media

Effects of shear rates on average cluster sizes (ACSs) and cluster size distributions (CSDs) in uni- and bi-systems of partly charged superfine nickel particles were investigated by Brownian dynamics, and clustering properties in these systems were compared with those in non-polar systems. The results show that the ACSs in bi-polar systems are larger than those in the non-polar systems. In uni-polar systems the behavior of clustering property differs: at the lower ionic concentration (10%), repulsive force is not strong enough to break clusters, but may greatly weaken them. The clusters are eventually cracked into smaller ones only when concentration of uni-polar charged particles is large enough. In this work, the ionic concentration is 20%. The relationship between ACS and shear rates follows power law in a exponent range of 0.176–0.276. This range is in a good agreement with the range of experimental data, but it is biased towards the lower limit slightly. Foundation item: Projects(50474037, 50874087) supported by the National Natural Science Foundation of China; Project (BK2006078) supported by the Natural Scientific Funds of Jiangsu Province, China     

形变诱导法半固态加热工艺参数对LY12合金组织和晶粒尺寸的影响

对LY12合金采用形变诱导法制备半固态合金料坯的组织演变过程进行了观察，对变形率、半固态温度、半固态保温时间对合金半固组织和晶粒尺寸的影响进行了研究。组织演变过程观察表明：用形变诱导法制备该合金半固态坯料的合适的半固态重熔温度为618℃；合金在该温度重熔过程中，形变带状组织首先分解为细小的a多边形晶粒，随保温时间的延长，晶粒尺寸逐渐变大，同时a相逐渐球化；在相同的半固态温度和相同的保温时间下，宏观变形率大的晶粒尺寸要比变形率小的合金组织晶粒尺寸小；变形率大的试样比变形率小的液相出现时间早；在同一宏观变形率下，试校内部微观形变大的部位晶粒尺寸要比形变小的部位晶粒尺寸小。     

Vapor Phase Dealloying Derived Nanoporous Co@CoO/RuO2 Composites for Efficient and Durable Oxygen Evolution Reaction (Adv. Funct. Mater. 17/2023)

The development of low-cost and effective oxygen evolution reaction (OER) electrocatalysts to expedite the slow kinetics of water splitting is crucial for increasing the efficiency of energy conversion from electricity to hydrogen fuel. Herein, 3D bicontinuous nanoporous Co@CoO/RuO₂ composites with tunable sizes and chemical compositions are fabricated by introducing vapor phase dealloying of cobalt-based alloys. The influence of physical parameters on the formation of nanoporous Co substrates with various feature ligament sizes is systematically investigated. The CoO/RuO₂ shell is constructed by integrating a thin layer of RuO₂ on the inner surface of nanoporous Co, where the CoO interlayer is formed by annealing oxidization. The composite catalyst delivers an ultralow overpotential of 198 mV at 10 mA cm⁻², Tafel slope of 57.1 mV dec⁻¹, and long-term stability of 50 h. The superior OER activity and fast reaction kinetics are attributed to charge transfer through the coupling of Co O Ru bonds at the interface and the excellent nanopore connectivity, while the durability originates from the highly stable CoO/RuO₂ interface.     

Adaptive Stochastic Gradient Descent Optimisation for Image Registration

We present a stochastic gradient descent optimisation method for image registration with adaptive step size prediction. The method is based on the theoretical work by Plakhov and Cruz (J. Math. Sci. 120(1):964–973, 2004). Our main methodological contribution is the derivation of an image-driven mechanism to select proper values for the most important free parameters of the method. The selection mechanism employs general characteristics of the cost functions that commonly occur in intensity-based image registration. Also, the theoretical convergence conditions of the optimisation method are taken into account. The proposed adaptive stochastic gradient descent (ASGD) method is compared to a standard, non-adaptive Robbins-Monro (RM) algorithm. Both ASGD and RM employ a stochastic subsampling technique to accelerate the optimisation process. Registration experiments were performed on 3D CT and MR data of the head, lungs, and prostate, using various similarity measures and transformation models. The results indicate that ASGD is robust to these variations in the registration framework and is less sensitive to the settings of the user-defined parameters than RM. The main disadvantage of RM is the need for a predetermined step size function. The ASGD method provides a solution for that issue.     

A Note on Testing for Homogeneity Among Effect Sizes Sharing a Common Control Group.

L. V. Hedges and I. Olkin (1985) presented a statistic to test for homogeneity among correlated effect sizes and L. J. Gleser and I. Olkin (1994) presented a large-sample approximation to the covariance matrix of the correlated effect sizes. This article presents a more exact expression for this covariance matrix, assuming normally distributed data but not large samples, for the situation where effect sizes are correlated because a single control group was compared with more than one treatment group. After the correlation between effect sizes has been estimated, the standard Q statistic for correlated effect sizes can be used to test for homogeneity. This method is illustrated using results from schizophrenia research. (PsycINFO Database Record (c) 2010 APA, all rights reserved)