搅拌式风力致热装置启动性能研究

搭建搅拌式风力致热试验台,以自制的2种致热器为研究对象,使其分别在3个不同平均角加速度24.92、14.66、8.04 rad/s2下启动。通过动态扭矩测试仪和数据采集仪测试记录致热器启动阶段的相关数据。结果表明:致热器启动时所需扭矩与角加速度的一次方、转速、叶片半径的二次方成正比,同时得出这些因素之间的关系式;满负荷时,启动扭矩会出现一个峰值,且角加速度越大峰值越大,自然风必须提供峰值以上的扭矩,否则装置无法启动。     

Analysis of an extensive measurement program developed from the start up to the follow up of the operation of the CNAAA NPP

Integrated tests (IT) applied to the Units I and II of the CNAAA Nuclear Power Plants (Angra dos Reis, Rio de Janeiro, Brazil) vara part of a comprehensive test program required to have the commercial operational licence issued. The IT cover operation at zero power and the subsequent power levels (the power escalation) until the nominal power operation.

This paper reports and compares the results of systematic neutron and gamma equivalent dose-rate measurements performed inside and outside the reactor containment of each Unit, during the start-up phase of the operation, for different power levels of the reactors. It also compares the collective-doses measured along the operation of the two units of the CNAAA wich similar data of the Grafenrheinfeld nuclear power plant (Germany) — basic-of-project for the CNAAA — Unit II — and analyses the data under the fight of the state-of-art.     

Simulation of the VVER-1000 pump start-up experiment of the OECD V1000CT benchmark with CATHARE and TRAC-PF1

In the framework of joint effort between the Nuclear Energy Agency (NEA) of OECD, the United States Department of Energy (US DOE), and the Commissariat a l'Energie Atomique (CEA), France a coupled three-dimensional (3D) thermal-hydraulics/neutron kinetics benchmark for VVER-1000 was defined. The benchmark consists of calculation of a pump start-up experiment labelled V1000CT-1 (Phase 1), as well as a vessel mixing experiment and main steam line break (MSLB) transient labelled V1000CT-2 (Phase 2), respectively. The reference nuclear plant is Kozloduy-6 in Bulgaria. The overall objective is to assess computer codes used in the analysis of VVER-1000 reactivity transients. A specific objective is to assess the vessel mixing models used in system codes. Plant data are available for code validation consisting of one experiment of pump start-up (V1000CT-1) and one experiment of steam generator isolation (V1000CT-2). The validated codes can be used to calculate asymmetric MSLB transients involving similar mixing patterns. This paper summarizes a comparison of CATHARE and TRAC-PF1 system code results for V1000CT-1, Exercise 1, which is a full plant point kinetics simulation of a reactor coolant system (RCS) pump start-up experiment. The reference plant data include integral and sector average parameters. The comparison is made from the point of view of vessel mixing and full system simulation. CATHARE used a six-sector multiple 1D vessel thermal-hydraulic model with cross flows and TRAC used a six-sector, 18-channel coarse-mesh 3D vessel model. Good agreement in terms of integral parameters and inter-loop mixing is observed.     

抽水蓄能机组起动中的若干问题

根据在20世纪90年代末建成的十三陵、广蓄、天荒坪等抽水蓄能电站的实际运行经验，分析了在抽水蓄能电站实际运行中常用的发电、调相、抽水工况以及作为事故备用的“黑起动”等运行方式的起动过程，供大家参考。     

120万吨／年加氢裂化装置的开工及运行

介绍广州石化120×10^4t／a加氢裂化装置装置开工、运行过程以及满负荷标定结果。标定和运行情况表明，装置运行平稳，可以满足加工高硫直馏蜡油的要求，生产出优质轻质馏分油。     

石墨电极的研究与实践

介绍了石墨材料的有关性能、石墨组合电极的结构形式和其在生产现场中的应用情况及注意事项，并将石墨组合电极的性能特点与传统的钢质电极进行了对比，从而达到推广应用的目的。研制了与以往启动装置完全不同的石墨启动电极，为盐炉启动技术的发展，提供了新的途径。     

基于Linux+ARM的多格式视频图像采集系统的设计

设计了基于S3C2440微处理器的视频图像采集系统,详细分析了该系统的启动过程。在一块裸板上搭建起整个视频图像采集系统。结合V4L2技术完成了支持YUV、MJPEG图像格式的USB摄像头和支持RGB图像格式的CMOS摄像头的多格式视频图像采集系统。测试结果表明,该系统可以在LCD显示屏上动态显示多格式摄像头所采集到的视频图像,且视频图像具有清晰度高、流畅性好、稳定性强等特点,具有进一步推广使用的广阔前景。     

低压开车法在CO2气提法尿素装置的应用

介绍了低压开车法在改进型CO2气提法尿素装置中的实际应用，总结了低压开车法的优点，论述了低压投料的技术要点和措施，给出了开车过程曲线及技术数据。     

转笼式悬浮填料生物反应器启动性能试验

为了研究转茏式悬浮填料生物反应器的启动性能，简化其启动工艺，进行了常温和变温时的反应器的自然挂膜启动实验。实验结果表明，转笼式悬浮填料生物反应器构造的特定微环境有利于自然挂膜，启动比传统生物转盘快10d以上：经过启动参数优化，在水流量为2m^3／h，曝气量为3．6m^3／h、转笼转速为1．5r／min时，启动效果较好。     

From IP to Start-up： Building a Robust Life Science Incubator

An incubator is an organization that supports new ventures to grow and survive during the early stages. Mainly dedicated to information technology, life science may appear to be the next hot spot for incubators. Are there stabilized good practices？ Are the business models in information technology and in life science comparable when it goes to start-ups＇ incubation？ Leveraging our experience as practitioner in this field and using an inductive methodology, this paper tends to propose simple principles to help build robust incubators in life science, and to contribute to disseminate an entrepreneurial approach through an industry still dominated by blue chips.