铁锈渣对氧气生产的危害

介绍铁锈、铁锈渣对氧气生产的危害 ,分析一起因铁锈、铁锈渣引起的氧压机着火而殃及氧气囊燃烧的事故 ,针对分析的原因提出预防措施。     

A novel laboratory bench for practical evaluation of catalysts useful for simultaneous conversion of NOx and soot in diesel exhaust

This study deals with the development of a laboratory bench for the practical evaluation of catalysts that are useful for the direct conversion of NO_x and soot in the exhaust of diesel engines. The employed model exhaust is generated by using a diffusion burner with additionally dosing some gaseous components to the burner gas to obtain a realistic feed composition. The produced soot is extensively characterized by employing thermogravimetry, transmission electron microscopy, N₂ physisorption and temperature programmed techniques. The results of the different characterization methods show that the present soot is suitable for the intended catalytic investigations. The simultaneous conversion of NO_x and soot is examined like in practice, i.e. the soot is separated from the tail gas by a diesel particulate filter (DPF) that is coated with the catalyst. The deposited soot is then catalytically converted by NO_x and O₂ to form N₂ and CO₂. The conversions of NO_x and soot are measured by exclusively applying gas analysers, whereby a special experimental procedure is developed to determine the soot removal. Hence, additional soot related analytics are not required. To show the suitability of the constructed bench a Pt/Fe₂O₃/β-zeolite sample is taken as test catalyst that is reported to be very active in NO_x/soot reaction. The measurements performed with and without catalyst clearly show the effect of the used sample in simultaneous NO_x/soot conversion. We therefore consider the constructed laboratory bench to be a useful tool for testing and ranking catalytic materials.     

SiC颗粒尺寸及含量对SiCp／2024Al复合材料性能的影响

本文对粉末冶金法制备的SiCp/2024Al复合材料的性能进行了研究。随SiC颗粒尺寸的增大,复合材料的强度降低,而塑性和磨损抗力则增加。SiC颗粒尺寸对复合材料的物理性能没有什么影响。增加SiC颗粒含量,复合材料的强度、模量均增大,磨损抗力亦明显增加,而塑性和热膨胀系数则降低。     

上海市吴淞工业区大气PM2.5水溶成分的元素分析及细胞毒性研究

通过ICP-MS测定了上海市吴淞地区大气PM2.5水溶成分金属元素含量,通过四唑盐(MTT)测定细胞存活率,通过超氧化歧化酶(SOD)和丙二醛(MDA)两个指标测定细胞氧化损伤,琼脂糖凝胶电泳测定细胞内DNA损伤,流式细胞仪(Flow cytometry)检测细胞凋亡和周期等实验研究了大气PM2.5水溶成分的细胞毒性.实验结果表明:PM2.5可溶成分中Zn元素含量最高,PM2.5在一定浓度范围内能导致细胞死亡,引起细胞的氧化损伤,影响DNA的复制,阻碍细胞增殖,但没有诱导细胞凋亡.PM2.5中可溶金属离子对细胞毒性表现为联合作用.     

SiCp/2024铝基复合材料的超塑性变形行为研究

对经过热处理和冷轧后的体积分数为17％，尺寸为3．5μm的SiC颗粒增强2024铝合金薄板在753－853K范围内进行了超塑性实验研究. 结果在813K时以10^-1/S的变形速率下获得了259％的最大延伸率，最大应力敏感系数为0．25复合材料的变形激活能值在753－793K范围内为144kJ/mol，在813－853K内为202kJ/mol，接近纯铝的晶格扩散激活能值142kJ/mol。复合材料的变形机制主要为基体晶粒滑动机制。     

流化床电化学反应器研究进展

流化床电化学反应器是一种三维颗粒电极反应器,以其比表面积大、传质速率高而备受关注。就流化床电化学反应器在导电机理、数学模型、结构放大以及应用领域的研究现状和进展进行了综述,阐明了该类反应器开发、设计和模型化方面存在的问题,并提出了研究方向。     

Efficient material design for diesel particulate filters

This paper will give an overview about the filter development for diesel particulate emission control in automotive applications. The material development for passenger car diesel particulate filters led to new materials like silicon carbide while for heavy duty applications still Cordierite plays a major role. But in the future other materials might also be used for passenger cars. This paper will show the basic difference between both applications and describe the material design in terms of filter properties (base material, back pressure aspects, filtration efficiency, coating impact). Current application on vehicles with catalysed soot filters (CSF) with and without oxidation catalyst will be presented. Furthermore an outlook will be given on materials for catalysed soot filters for the future.     

Statistical properties of interparticle/void distance for amorphous plastics toughening

Statistical properties of interparticle/void distance (ID) for various particle/void and dispersion types are studied in relation with toughening of plastics using computer‐generated three‐dimensional models. Particle/void size groups adopted were either of constant diameter or of log‐normal distribution. Particles/voids were dispersed at uniform‐random or flocculated with multiple clusters. It was found that IDs are (a) of approximately Gaussian distribution for particles/voids of either a constant diameter or a log‐normal distribution, when they are dispersed at uniform‐random, but (b) not of Gaussian distribution for particle/void sizes of bimodal log‐normal distribution, nor for flocculated log‐normal distribution of particles/voids dispersed with multiple clusters. It was also found that the degree of ID uniformity for a single group of log‐normally sized particles/voids is not sensitive to standard deviation of particle/void size. Mixing effect on ID properties using two groups of log‐normally distributed particles/voids with similar mean particle/void diameters was simulated. It was found that, when a significant amount (36 vol %) of particles/voids of a small mean and standard deviation of ID was mixed with a group of particles/voids of a large mean and standard deviation of ID, mean and standard deviation of ID for the mixture were not substantially lower than those of the group of particles/voids of the large mean and standard deviation of ID. It was also found that the degree of ID uniformity for the mixture of the two groups was lower than those of individual groups, indicating that the mixing has deleterious effect on toughening. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 4256–4262, 2006     

Structural characterization of reactor blends of polypropylene and ethylene‐propylene rubber

Blends of isotactic polypropylene (PP), ethylene‐propylene rubber copolymer (EPR), and ethylene‐propylene crystalline copolymer (EPC) can be produced through in situ polymerization processes directly in the reactor and blends with different structure and composition can be obtained. In this work we studied the structure of five reactor‐made blends of PP, EPR, and EPC produced by a Ziegler‐Natta catalyst system. The composition of EPR was related to the ratio between ethylene and propylene used in the copolymerization step. The ethylene content in the EPR was in the range of 50–70 mol %. The crystallization behavior of PP and EPC in the blends was influenced by the presence of the rubber, and some specific interactions between the components could be established. By preparative temperature rising elution fractionation (P‐TREF) analysis, the isolation and characterization of crystalline EPC fractions were made. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 2155–2162, 2004     

Ni/Al_2O_3覆膜方法

阐述了Ni/Al2 O3 复合颗粒在生产中的应用 ,讨论了在Al2 O3 陶瓷颗粒上形成Ni膜的三种方法 ,分析了这些方法的优缺点。