Dysprosium doped copper oxide (Cu1-xDyxO) nanoparticles enabled bifunctional electrode for overall water splitting

The production of hydrogen, a favourable alternative to an unsustainable fossil fuel remains as a significant hurdle with the pertaining challenge in the design of proficient, highly productive and sustainable electrocatalyst for both oxygen evolution reaction (OER) and hydrogen evolution reaction (HER). Herein, the dysprosium (Dy) doped copper oxide (Cu_1-xDy_xO) nanoparticles were synthesized via solution combustion technique and utilized as a non-noble metal based bi-functional electrocatalyst for overall water splitting. Due to the improved surface to volume ratio and conductivity, the optimized Cu_1-xDy_xO (x = 0.01, 0.02) electrocatalysts exhibited impressive HER and OER performance respectively in 1 M KOH delivering a current density of 10 mAcm^?2 at a potential of ?0.18 V vs RHE for HER and 1.53 V vs RHE for OER. Moreover, the Dy doped CuO electrocatalyst used as a bi-functional catalyst for overall water splitting achieved a potential of 1.56 V at a current density 10 mAcm^?2 and relatively high current density of 66 mAcm^?2 at a peak potential of 2 V. A long term stability of 24 h was achieved for a cell voltage of 2.2 V at a constant current density of 30 mAcm^?2 with only 10% of the initial current loss. This showcases the accumulative opportunity of dysprosium as a dopant in CuO nanoparticles for fabricating a highly effective and low-cost bi-functional electrocatalyst for overall water splitting.     

Electronic regulation and core-shell hybrids engineering of palm-leaf-like NiFe/Co(PO3)2 bifunctional electrocatalyst for efficient overall water splitting

Constructing efficient and stable bifunctional electrocatalysts for overall water splitting remains a challenge because of the sluggish reaction kinetics. Herein, the core-shell hybrids composed of Co(PO₃)₂ nanorod core and NiFe alloy shell in situ grown on nickel foam (NiFe/Co(PO₃)₂@NF) are synthesized. Owing to the hierarchical palm-leaf-like structures and strong adhesion between NiFe alloys, Co(PO₃)₂ and substrates, the catalyst provides a large surface area and rapid charge transfer, which facilitates active sites exposure and conductivity enhancement. The interfacial effect in the NiFe/Co(PO₃)₂ core-shell structure modulates the electronic structure of the active sites around the boundary, thereby boosting the intrinsic activity. Benefiting from the stable structure, the durability of the catalyst is not impaired by the inevitable surface reconfiguration. The NiFe/Co(PO₃)₂@NF electrode presents a low cell voltage of 1.63 V to achieve 10 mA cm^?2 and manifests durability for up to 36 h at different current densities.     

A highly active composite electrocatalyst Ni–Fe–P–Nb2O5/NF for overall water splitting

This work demonstrates a facile Nb₂O₅-decorated electrocatalyst to prepare cost-effective Ni–Fe–P–Nb₂O₅/NF and compared HER & OER performance in alkaline media. The prepared electrocatalyst presented an outstanding electrocatalytic performance towards hydrogen evolution reaction, which required a quite low overpotential of 39.05 mV at the current density of ?10 mA cm^?2 in 1 M KOH electrolyte. Moreover, the Ni–Fe–P–Nb₂O₅/NF catalyst also has excellent oxygen evolution efficiency, which needs only 322 mV to reach the current density of 50 mA cm^?2. Furthermore, its electrocatalytic performance towards overall water splitting worked as both cathode and anode achieved a quite low potential of 1.56 V (10 mA cm^?2).     

Nickel foam-supported Fe,Ni-Polyporphyrin microparticles: Efficient bifunctional catalysts for overall water splitting in alkaline media

Developing highly active, stable and sustainable electrocatalysts for overall water splitting is of great importance to generate renewable H₂ for fuel cells. Herein, we report the synthesis of electrocatalytically active, nickel foam-supported, spherical core-shell Fe-poly(tetraphenylporphyrin)/Ni-poly(tetraphenylporphyrin) microparticles (FeTPP@NiTPP/NF). We also show that FeTPP@NiTPP/NF exhibits efficient bifunctional electrocatalytic properties toward both the oxygen evolution reaction (OER) and the hydrogen evolution reaction (HER). Electrochemical tests in KOH solution (1 M) reveal that FeTPP@NiTPP/NF electrocatalyzes the OER with 100 mA cm⁻² at an overpotential of 302 mV and the HER with 10 mA cm⁻² at an overpotential of 170 mV. Notably also, its catalytic performance for OER is better than that of RuO₂, the benchmark OER catalyst. Although its catalytic activity for HER is slightly lower than that of Pt/C (the benchmark HER electrocatalyst), it shows greater stability than the latter during the reaction. The material also exhibits electrocatalytic activity for overall water splitting reaction at a current density of 10 mA cm⁻² with a cell voltage of 1.58 V, along with a good recovery property. Additionally, the work demonstrates a new synthetic strategy to an efficient, noble metal-free-coordinated covalent organic framework (COF)-based, bifunctional electrocatalyst for water splitting.     

板式精馏塔的塔板效率

塔板效率包括:点效率、莫夫里效率和全塔效率,它们的值主要受流体多相流动时的动力学体系特性的影响;点效率可由双膜理论推出,莫夫里效率和全塔效率存在一定的内在关系。     

一种能量高效的无线传感器网络拓扑控制算法

通过对现有拓扑控制算法的研究,针对无线传感器网络中节点能耗分布不均匀的问题,提出了一种能量高效的拓扑控制算法(EETCA)。该算法以均衡全局能耗为目标,综合考虑了节点的剩余能量、簇的规模、数据最优传输跳数等因素,避免了部分节点能量消耗过快,从而有效地均衡网络负载。仿真结果表明:EETCA在能耗均衡方面均优于原来的算法,延长了无线传感器网络的生命周期。     

关于控制氯代烃的政策选择

本文分析了氯代烃的生产所引起的环境问题,并提出了减少氯代烃环境影响的政策选择的基本原则。     

New liquid membrane technology for simultaneous extraction and stripping of copper(II) from wastewater

In this paper, a new liquid membrane technique, hollow fiber renewal liquid membrane (HFRLM), is presented, which is based on the surface renewal theory, and integrates the advantages of fiber membrane extraction, liquid film permeation and other liquid membrane processes. The results from the system of CuSO₄+D2EHPA in kerosene+HCl show that the HFRLM process is very stable. The liquid membrane is renewed constantly during the process, the direct contact of organic droplets and aqueous phase provides large mass transfer area. These effects can significantly reduce the mass transfer resistance in the lumen side. Then the mixture of feed phase and organic phase flowing through the lumen side gives a higher mass transfer rate than that of stripping phase and organic phase, because the aqueous layer diffusion of feed phase is the rate-controlling step. The overall mass transfer coefficient increases with increasing flow rates and D2EHPA concentration in the organic phase, and with decreasing initial copper concentration in the feed phase. The overall mass transfer coefficient also increases with increasing pH in the feed phase, and reaches a maximum value at pH of 4.44, then decreases. Also, there is a favorable w/o volume ratio of 20:1 to 30:1 for this process. Compared with hollow fiber supported liquid membrane and hollow fiber membrane extraction processes, HFRLM process has a high mass transfer rate. Mathematical model for the HFRLM process based on the surface renewal theory is developed. The calculated results are in good agreement with experimental results under the conditions studied.     

基于PDM的工程变更管理

变更活动在企业产品开发过程中不可避免，论文从工程变更的需求出发，分析了当前工程变更的瓶颈所在，提出了基于PDM的工程变更模型和变更流程，并结合PDM中已有的工作流管理技术和生命周期管理技术，阐述了如何保证变更流程自动化控制和变更数据的正确传递与演变的关键问题，最后给出具体的实现步骤和实例。