ADN氧化剂的合成及其在推进剂中的应用

综述了ADN的合成、性质及其在推进剂中的应用，认为球形ADN具有能量高、感度低、特征信号低，对环境无污染等优点，将其作为氧化剂在高能低特征信号推进剂中有着广阔的应用前景。     

含能材料分子结构与感度的相关性

综述了国外近年来含能材料分子结构参数与感度相关关系的最新研究成果。研究表明：某些芳香族硝基化合物的撞击感度与Ｃ－ＮＯ２键强度有关；硝胺及脂肪族硝基化合物的冲击波感度与分子中Ｎ－ＮＯ２键的数目，长度和分子量相关。     

1,4,5,8-四氮杂氢化萘（2,3,-6,7）并双呋咱衍生物的合成

由1，4，5，8—四氮杂氢化萘(2，3，-6，7)并双呋咱经羟甲基化、酰化、硝化和叠氮化等反应合成出一系列热稳定的呋咱含能衍生物，并以^1HNMR、IR、MS、元素分析鉴定了其结构。     

二叠氮季戊二醇二硝酸酯的研究

二叠氮季戊二醇二硝酸酯（ＰＤＡＤＮ）分子中有两种含能基─ＯＮＯ＿２和─Ｎ＿３，可望作为一种良好的炸药或火箭推进剂的组分。美国的Ｆｒａｎｋｅｌ等已合成出该化合物，并报道它在常温下（２２．５℃）是油状液体；但我们用相同方法合成出的产物却是熔点为３９．６～３９．７℃的晶体物质。本文介绍了我们的实验结果及其有关物理化学性质方面的数据。     

Theoretical Models for Binder Burnout

The kinetics of binder burnout, from a ceramic green body, are considered for the case of an "unzipping" binder which decomposes to produce a volatile monomer. The process is considered to fail if the concentration of monomer in the green body exceeds that in equilibrium with vapor at 1 atm (≅10⁵ Pa), when an internal bubble would be expected to form. Steady-state diffusional calculations and computer simulations explore the size and temperature dependence of the process and are in agreement. The model suggests that it is not feasible to burn out a large flat piece greater than about 3 mm thick, without going to very long times of burnout. The kinetics are significantly improved if porosity develops in the piece during the early stages of decomposition, as opposed to the retreat of the binder into the piece on a uniform front.     

唑系含能化合物的特征

从密度、感度、熔化分解点、焓值等方面系统地概述了唑系含能化合物的特征。     

Liquid-Phase Transport During Removal of Organic Binders in Injection-Molded Ceramics

A method has been developed for calculating hydraulic pressures induced by thermal expansion of liquid binders early in the removal cycle, when evaporative losses are negligible and fully saturated conditions prevail. Specific results were obtained for flat compacts containing a common wax binder, mixed with varying amounts of low-density polyethylne. In general, these results show how the risk of hydraulic fracture increases with heating rate and compact thickness. Although pressures are minimal when the binder consists entirely of wax, the continual addition of polyethylene eventually gives rise to unacceptable risk levels, even for relatively thin compacts. Binder removal at elevated temperatures is considered subsequently. In this case, vapor pressures eventually approach a critical level, thereby allowing mass removal by evaporation to overcome the effect of thermal expansion in maintaining full saturation. With the onset of void formation, the developing capillary pressure supersedes hydraulic pressure as the driving force in liquid transport. Besides representing capillary flow, the present formulation also accounts for thermal degradation of the binder during removal. The resulting system of equations was solved numerically for a variety of representative debinding conditions. Predictions for flat compact containing a balanced wax/polyethylene binder indicate that thermal degradation of the polyethylene can give rise to a marked improvement in debinding rates. It turns out, however, that this enhancement is far more effective in thinner compacts.     

牙膏增稠的理论和增稠剂

深入阐述了牙膏增稠的流变学理论，同时，介绍了用于生产牙膏的儿种主要增稠剂的性能及其在牙膏配方中的应用。流变学理论和黏合剂化学技术的有机结合直接导致了新型牙膏配方产品的诞生。     

On the nature of the burning rate-controlling reaction of energetic materials for the gas-phase model

For model systems with known kinetics of elementary reactions (CH₃NO₂ and HN₃), temperature ranges are established in which the rate-controlling reactions are the initial endothermic decomposition of the starting material or the subsequent secondary reactions. Heat release in reactions of NO₂, NO, and N₂O with various fuels, such as CH₂O, CO, H₂, and HCN, is modeled to establish the kinetic parameters and nature of the rate-controlling reactions in gas flames of nitro compounds. It is shown that the activation energy of the heat-release reaction due to the interaction of NO₂ with a hydrocarbon fuel (which is characteristic of the first flame of nitro compounds) is in the range of 29–33 kcal/mole, depending on the type of fuel. According to the calculations performed, the activation energy of the rate-controlling heat-releasing process due to the deoxidation of NO and N₂O (which is typical of the second flame of nitro compounds) is 43–58 kcal/mole. In the range of high pressures, where the flames merge, the kinetic parameters of heat release are determined by the reactions of the most reactive nitrogen oxide NO₂. __________ Translated from Fizika Goreniya i Vzryva, Vol. 43, No. 3, pp. 59–71, May–June, 2007.     

5-氰基-4-氨基咪唑的合成与热性能

咪唑基含能化合物是目前高能化合物的重要研究方向，而5-氰基-4-氨基咪唑是设计、合成新型咪唑联四唑类高能高氮化合物的关键中间体。以5-甲酰胺基-4-氨基咪唑（AICON）为原料，经其与三氯氧磷（POCl3）的脱水反应获得了5-氰基-4-氨基咪唑（AICN），通过优化反应体系、反应温度、反应时间以及物料物质的量比，使得AICN的收率>65%，纯度（HPLC）>99.5%。此外，采用NMR、IR和元素分析对其进行了结构确征，利用热重分析法研究其热性能。结果表明：AICN的最佳反应条件为以POCl3为脱水剂，n(AICON)：n(POCl3)为1:10，反应升温模式为先快速升温至80~85 ℃，维持反应30 min，然后降温至70~75 ℃，维持反应1~1.5 h；AICN在40~1000 ℃温度区间存在两个失重过程，对应的热分解温度区间分别为40~400 ℃和400~1000 ℃、热失重分别为19.8%和60.7%、热分解峰温分别为256.5和698.4 ℃，表明其具有良好的热稳定性。