The Algorithm and Its Application of a Multi-Channel Adaptive Decision-Feedback Equalizer

1　IntroductionOneofthekeyproblemsinhigh speeddigitalradiocommunicationistheInter Symbol Interfer ence (ISI)causedbythemulti pathbetweenthetransmitterandthereceiver.Becauseoftherelativemovementbetweenthereceiverandthetransmitterandthecontinuouschangeoftransmissionmedia,ISIisusuallytime variant.Inthepasttwotothreedecades,abroadstudyofthetype ,structureandadaptivealgorithmofadaptiveequalizershasbeencarriedouttomitigateISI[1～ 7] .Withtheintroductionofadaptiveantennasanddiversityreceptiontec…     

基于CDBA的电流模式多功能滤波器

文章提出了一种由电流差分缓冲放大器（CDBA）实现的两种电流模式多功能双二次滤波器，该滤波器具有可实现多种滤波功能、能独立地调节ω0和Q、灵敏度较低等特点。     

NaI多道脉冲幅度分析系统在燃料元件破损监测中的应用研究

介绍了船用堆燃料元件破损监测中较常用的两种方法.通过分析其缺陷,提出了用NaI多道脉冲幅度分析系统测量特征核素(131I、137Cs)的方法,有效避免了监测中的干扰因素的影响,降低了定量监测中的误报率,提高了燃料元件破损监测的效率和置信度.     

Multi-channel SAR imaging based on distributed compressive sensing

The rapid development of compressive sensing(CS)shows that it is possible to recover a sparse signal from very limited measurements.Synthetic aperture radar(SAR)imaging based on CS can reconstruct the target scene with a reduced number of collected samples by solving an optimization problem.For multi-channel SAR imaging based on CS,each channel requires sufficient samples for separate imaging and the total number of samples could still be large.We propose an imaging algorithm based on distributed compressive sensing(DCS)that reconstructs scenes jointly under multiple channels.Multi-channel SAR imaging based on DCS not only exploits the sparsity of the target scene,but also exploits the correlation among channels.It requires significantly fewer samples than multi-channel SAR imaging based on CS.If multiple channels offer different sampling rates,DCS joint processing can reconstruct target scenes with a much more flexible allocation of the number of measurements offered by each channel than that used in separate CS processing.     

面向ZigBee的视频多描述编码及其传输性能仿真

针对视频码流在ZigBee等不可靠低速无线网络传输时易发生编码信息包丢失而导致接收端无法正确解码这一问题,提出一种基于3D-SPIHT视频多描述编码方案。与传统多描述编码如MDSQ相比,该方案创建的各描述质量平衡,并能通过去除视频帧间冗余来提高压缩比;与国际标准（H.264等）相比,该方案具有算法简单、能够在任意码流截断处解码、码率可连续分级和无明显块效应等优点。实验表明,该编码方案能够较好地应用于ZigBee多信道网络,并在较大压缩比的情况下仍能获取质量较好的重建图像,具有较高的应用价值。     

一种多接口多信道VANET动态信道分配算法研究

为了合理地实现多接口多信道车载自组织网络（VANET）车辆节点间通信信道的动态分配,提出了一种基于通信双方车辆节点信道切换队列的动态信道分配算法。定义了车辆节点的射频接口状态,给出了信道的性能因子以及信道切换队列的生成方法,通过综合考虑通信双方车辆节点的射频接口状态和信道切换队列,快速自主地建立通信链路,从而解决了信道公平接入和分配不合理的问题。通过软件仿真比较可以看出,该算法实现了信道的动态分配,减小了平均端到端时延,增加了网络平均吞吐量,显著提高了多接口多信道VANET的网络性能。     

基于FPGA的多路矿用气体传感器智能调校系统

矿用气体传感器因煤矿安全被大量使用,国家规定必须定期进行调校,目前的传感器调校系统可同时对5-8台传感器进行调校,针对大中型煤矿生产过程中需要调校的矿用气体传感器数量大、调校耗时长的现状,提出了一种基于单片机与现场可编程门阵列（FPGA）的64路气体传感器调校系统,介绍了系统的整体设计并详细阐述了该系统的气路控制模块和传感器输出信号采集模块,使用Verilog语言在QuartusⅡ工具中实现FPGA的逻辑设计、仿真和综合。结果证明：该系统能有效地完成对64路气体传感器同时调校的目的,很大程度节省了人力消耗,提高了调校效率,节约了调校时间。     

LAG WINDOW ESTIMATION OF THE DEGREE OF DIFFERENCING IN FRACTIONALLY INTEGRATED TIME SERIES MODELS

Abstract. In this paper we consider the estimation of the degree of differencing d in the fractionally integrated autoregressive moving-average time series model ARFIMA ( p, d, q ). Using lag window spectral density estimators we develop a regression type estimator of d which is easy to calculate and does not require prior knowledge of p and q. Some large sample properties of the estimator are studied and the performance of the estimator for small samples is investigated using the simulation method for a range of commonly used lag windows. Some practical recommendations on the choice of lag windows and the choice of the window parameters are provided.     

余度系统中的动态同步和表决控制

在多通道余度系统的研究和应用中,同步问题是整个余度系统正确运行的基本保证。基于多交叉通道模型和同步时间的静态分配策略,提出动态时间容错方法。针对该方法,设计基于时间容错的动态表决控制算法,实现多通道系统中的动态同步。给出动态同步表决控制逻辑,用于控制表决时间并监测表决数据。理论分析和实验结果表明,时间容错的动态表决控制算法扩展了任务处理的时间窗口,与静态同步算法相比,可有效降低通道故障率,提高对瞬时干扰的抵御能力以及余度系统的可靠性。     

基于分组管理的无线mesh网多信道分配算法*

为了合理利用多信道来提高无线网络吞吐量,针对基于802.11标准无线mesh网的业务特点,提出了基于分组管理的分布式多信道分配算法。该算法将节点接口分为回程接口与转发接口,并使回程接口分配到在干扰区域内干扰值尽可能小的信道。仿真实验结果表明,该算法可以减少区域干扰,并可充分利用信道的多样性和得到较高的网络吞吐量。