复印粉的粉碎分级技术

本文介绍了利用国产气流粉碎机和余气萃取分级制备复印粉的实用技术，并展示了粉碎分级系统和复印粉的电镜照片。     

Preparation of ultra-fine copper powder and its lead-free conductive thick film

In this paper, non-agglomerated monodispersed ultra-fine copper metallic powders have been synthesized with chemical reduction method. Fine lead-free glass powders were also prepared by solid synthesis process. Thick film paste prepared by above-mentioned copper metallic powders and lead-free glass powders was applied as conductive paste of MLCC. Mixture of glass and zinc oxide give the thick film a high adhesion strength which is attributed to the rough interface from interfacial reaction between glass and chip, and a good densification. Diffusion of metal between copper thick film and nickel thick film is clear. Ni-Cu solid solution appears under high temperature firing.     

Structure of rapidly solidified aluminum alloys

This paper is a summary of an extensive research program carried out by the authors on the structure of rapidly solidified aluminum alloys; and a comparison with the work of others also involved in this field. The paper discusses the changes in the dendritic and non-dendritic structure of the matrix at cooling rates from 10^–3 to 10¹⁰ K/s and discusses the hetergeneity of the structure caused by interdendritic-segretion during solidification.     

真空熔炼高压气体雾化制粉技术及设备

介绍了气体雾化粉的品种、用途及工业化生产。还介绍了真空熔炼-高压气体雾化制粉所需的设备。     

Hydrothermal Synthesis of Acicular Lead Titanate Fine Powders

A pure, acicular lead titanate (PbTiO₃) fine powder with a white color has been prepared by hydrothermal synthesis. It is a new phase of PbTiO₃ with I 4 symmetry, cell parameters of a = 12.358 Å and b = 14.541 Å, and a density of 6.80 g.cm⁻³. The influences of pH (12.5 to 14.4), Pb/Ti ratio (1.0 to 1.6) in the feedstock, reaction temperature (130° to 230°C), time (0.25 to 4 h), starting materials, and additives on the formation of acicular PbTiO₃ under hydrothermal conditions have been investigated. The acicular PbTiO₃ with I 4 symmetry, referred to as the PX phase, can be converted to the perovskite-type (PE phase) of PbTiO₃ at about 605°C while its acicular morphology is essentially unchanged. The preferable conditions for preparing pure acicular PX-phase PbTiO₃ are that the pH is 13.0 to 14.0, Pb/Ti ratio is >1.3, reaction temperature is 170° to 200°C, time is 0.5 to 1.0 h, titanium butoxide (Ti[O(CH₂)₃CH₃]₄) is the starting material, and poly(vinyl alcohol) is an additive. The acicular grain of the PX phase is usually less than 100 nm in diameter and more than 1000 nm in length.     

Stickiness, Functionality, and Microstructure of Food Powders

Three major aspects of food powder are described and discussed. Stickiness is one issue that can cause production and product handling difficulties. Stickiness has been interpreted in a number of ways and thus measured differently. Functionality of the primary (single) particles or agglomerated powders is of practical interest to the consumers. The desired quality will have to be matched or exceeded by the powder manufacturers. Finally, microstructure provides a key linkage between the production and the functionality. Its formation has impacts on both the stickiness and functionality.     

用保护共沉淀法制备纳米ZrO2(Y2O3)粉体

用Tween-80保护共沉淀法制备了ZrO2(Y2O3）纳米粉体，用差热分析，热重分析，X射线衍射及透射电子显微镜等技术研究所了粉体的特征，结果表明：在700℃燃烧0.5h后ZrO2(Y2O3)粉体的平均粒径为3－9nm，比表面为128.5-134.5m^3g^-1,在1250℃煅烧8h后ZrO2(Y2O3)粉体已完全形成了立方相的ZrO2L大溶体，并且有非常好的烧结性能。     

Drying of Probiotics: Optimization of Formulation and Process to Enhance Storage Survival

This work describes how probiotic bacteria can be dried at low temperature in two steps, combining spray drying and vacuum drying, in order to enhance their survival during storage. A sufficient number of dried probiotics survived storage for more than 3 months at 30°C, if an appropriate combination of protein and carbohydrate was selected as carrier and storage conditions were maintained optimal. The use of soy protein and maltodextrin or skim milk and arabic gum resulted in the best survival rates of probiotics during storage. No evident difference was found between different spray dryer configurations, although a cocurrent flow was preferred.     

Sol-gel processing: A versatile concept for special glasses and ceramics

The various parameters related to sol-gel processing are discussed with special reference to those which usually attract less attention but depending on the final product in mind, can play important roles. The versatility of the sol-gel technique in materials preparation is demonstrated by discussing the various products developed at the author’s laboratory by using this processing method.     

Synthesis of nano particle of inorganic oxides by polymer matrix

Ultrafine (⩽ 150 nm) powders of spinels [MFe₂O₄ where M = Ni(II), Co(II) and Zn(II)]; rare-earth orthoferrites [RFeO₃ where R = Sm, Nd and Gd], and rare-earth garnets [R₃Fe₃O₁₂ where R = Sm, Nd and Gd] with good purity and chemical homogeneity were prepared through two new versatile chemical routes. The first route involved the coprecipitation of the desired metal nitrates from their aqueous solution, in presence of a water soluble polymer-polyvinyl alcohol (PVA), by triethyl ammonium carbonate solution. The other process involved complete evaporation of a mixture of optimum amounts of PVA and the desired aqueous metal nitrate solutions, with and without the addition of optimum amounts of urea when the mixture was evaporated to a pasty mass. In addition, detailed study on the reported potassium ferricyanide route was also carried out for the production of the rare-earth orthoferrite powders. The various precursor as well as the heat-treated mixed-oxide powders, prepared through each of the routes, were compared by the physical characterization studies involving thermal gravimetry and differential scanning calorimetry, infrared spectroscopy, X-ray powder diffraction, transmission electron microscopy, and room temperature magnetic measurements.