三维石墨烯-碳纳米管/水泥净浆的压敏性能

为了探索三维石墨烯-碳纳米管(G-CNTs)/水泥净浆的压敏性能,采用四电极法研究了荷载作用下GCNTs/水泥净浆的电阻率变化,并分析不同G-CNTs掺量、加载幅度、加载速度以及恒定荷载对电阻率变化的影响。研究表明:随着G-CNTs掺量的增加,电阻率呈先减小后稳定的变化趋势,在G-CNTs掺量由0.2wt%增加至1.6wt%时,电阻率下降51.8%;电阻率与温度呈负相关;G-CNTs掺量高于0.8wt%时可以显著提高水泥净浆的压敏性能,且电阻率变化率与应力应变有明显的对应关系,1.2wt%G-CNTs掺量下试件的应力灵敏系数和应变灵敏系数分别为2.3%/MPa和291;G-CNTs/水泥净浆电阻率变化率幅值随着加载幅度增大而相应增加,其电阻率变化率曲线在不同加载速度以及恒定荷载作用下均与应力-应变曲线一一对应,具有良好的压敏特性。     

云杉八齿小蠹Ips typographus L.虚拟模型构建方法研究

本文以云杉八齿小蠹Ips typographus Linnaeus为例,经标本选取,观察虫体整体形态,绘制整体结构草图,电子显微镜观察局部、得到局部数字图像,分别建立虫体每一部分的高精度细节。把模型每部分拼装在一起组成整体模型,构建出了云杉八齿小蠹三维虚拟昆虫数字化模型。     

300M超高强钢在中性盐雾环境中的腐蚀行为及机制

摘要：为了研究300M超高强钢在中性盐雾环境中的腐蚀行为及腐蚀机制，采用失重法，宏观、微观腐蚀形貌分析，三维表面轮廓分析及电化学分析的研究方法，来表征腐蚀实验现象并进行分析。结果表明：300M超高强钢在中性盐雾环境中的腐蚀产物为FeOOH、Fe2O3、Fe(OH)3和Fe3O4；腐蚀速率随着腐蚀时间逐渐降低，腐蚀后期（72h）腐蚀速率降低50%；腐蚀初期以点蚀为主，点蚀坑通过横向扩展，逐渐发展为后期的均匀腐蚀，腐蚀表面形貌呈沟壑状；外腐蚀层对基体的保护能力很弱，Cr元素在锈层靠近基体的一侧偏聚使内腐蚀层具有一定的抗腐蚀性。     

Three‐dimensional color prediction modeling of single‐ and double‐layered woven fabrics

In this research, the three‐dimensional structural and colorimetric modeling of three‐dimensional woven fabrics was conducted for accurate color predictions. One‐hundred forty single‐ and double‐layered woven samples in a wide range of colors were produced. With the consideration of their three‐dimensional structural parameters, three‐dimensional color prediction models, K/S‐, R‐, and L*a*b*‐based models, were developed through the optimization of previous two‐dimensional models which have been reported to be the three most accurate models for single‐layered woven structures. The accuracy of the new three‐dimensional models was evaluated by calculating the color differences ΔL*, ΔC*, Δh°, and ΔE_CMC(2:1) between the measured and the predicted colors of the samples, and then the error values were compared to those of the two‐dimensional models. As a result, there has been an overall improvement in color predictions of all models with a decrease in ΔE_CMC(2:1) from 10.30 to 5.25 units on average after the three‐dimensional modeling.     

A comparison of transformation methods for evaluating two‐dimensional weakly singular integrals

Accurate numerical evaluation of integrals arising in the boundary element method is fundamental to achieving useful results via this solution technique. In this paper, a number of techniques are considered to evaluate the weakly singular integrals which arise in the solution of Laplace's equation in three dimensions and Poisson's equation in two dimensions. Both are two‐dimensional weakly singular integrals and are evaluated using (in a product fashion) methods which have recently been used for evaluating one‐dimensional weakly singular integrals arising in the boundary element method. The methods used are based on various polynomial transformations of conventional Gaussian quadrature points where the transformation polynomial has zero Jacobian at the singular point. Methods which split the region of integration into sub‐regions are considered as well as non‐splitting methods. In particular, the newly introduced and highly accurate generalized composite subtraction of singularity and non‐linear transformation approach (GSSNT) is applied to various two‐dimensional weakly singular integrals. A study of the different methods reveals complex relationships between transformation orders, position of the singular point, integration kernel and basis function. It is concluded that the GSSNT method gives the best overall results for the two‐dimensional weakly singular integrals studied. Copyright © 2002 John Wiley & Sons, Ltd.     

利用信息融合方法的三维特征提取

本文提出了一种基于信息融合的物体三维特征的提取方法，该方法利用两幅互相配准的三维测距图像和灰度图像，来提取多面体的三维特征。首先，通过分析灰度图像中的灰度变化及测距图像中的测距值变化，分别求取各自图像中物体的特征点及特征边；然后，利用两配准图像之间的对应关系，求得所有特征点、面与多边形在三维测距图像中的三维表示；接着，通过分析三维测距图像中所测得的各候选平面上特定点与边处的曲率及法向，验证候选平面     

A Knowledge-Navigation System for Dimensional Metrology

Geometric dimensioning and tolerancing (GD&T) is a method to specify the dimensions and form of a part so that it will meet its design intent. GD&T is difficult to master for two main reasons. First, it is based on complex 3D geometric entities and relationships. Second, the geometry is associated with a large, diverse knowledge base of dimensional metrology with many interconnections. This paper describes an approach to create a dimensional metrology knowledge base that is organized around a set of key concepts and to represent those concepts as virtual objects that can be navigated with interactive, computer visualization techniques to access the associated knowledge. The approach can enable several applications. First is the application to convey the definition and meaning of GD&T over a broad range of tolerance types. Second is the application to provide a visualization of dimensional metrology knowledge within a control hierarchy of the inspection process. Third is the application to show the coverage of interoperability standards to enable industry to make decisions on standards development and harmonization efforts. A prototype system has been implemented to demonstrate the principles involved in the approach.     

Examining a dimensional representation of depression and anxiety disorders' comorbidity in psychiatric outpatients with item response modeling.

The current study replicated, in a sample of 2,300 outpatients seeking psychiatric treatment, a previous study (R. F. Krueger & M. S. Finger, 2001) that implemented an item response theory approach for modeling the comorbidity of common mood and anxiety disorders as indicators along the continuum of a shared latent factor (internalizing). The 5 disorders examined were major depressive disorder, social phobia, panic disorder/agoraphobia, specific phobia, and generalized anxiety disorder. The findings were consistent with the prior research. First, a confirmatory factor analysis yielded sufficient evidence for a nonspecific factor underlying the 5 diagnostic indicators. Second, a 2-parameter logistic item response model showed that the diagnoses were represented in the upper half of the internalizing continuum, and each was a strongly discriminating indicator of the factor. Third, the internalizing factor was significantly associated with 3 indexes of social burden: poorer social functioning, time missed from work, and lifetime hospitalizations. Rather than the categorical system of presumably discrete disorders presented in DSM-IV, these 5 mood and anxiety disorders may be alternatively viewed as higher end indicators of a common factor associated with social cost. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

一种探测二维电磁目标的新方法

电磁目标的探测对通信而言有着十分重要的意义。本文描述一种收敛迅速、结果准确、抗强随机噪声的探测二维电磁目标的新方法。首先从体等效原理出发得到一个积分方程组，此方程组可求解散射问题。随后，对此方程组求变分，变形后得到散射场变化与介电参数变化之间关系的矩阵方程，即反演方程。文中列举了几个例子，通过数值实验结果证明本法收敛速度快、反演精度高、适应复杂目标的能力强，能抗强随机噪声干扰     

Polyspectral Analysis of Two-dimensional Mixed Processes and Coupled Harmonics

1　ＩｎｔｒｏｄｕｃｔｉｏｎＩｎｍａｎｙａｐｐｌｉｃａｔｉｏｎｓ,ｓｕｃｈａｓｒａｄａｒ,ｓｏｎａｒ,ｇｅｏｐｈｙｓｉｃｓ,ｒａｄｉｏｃｏｍｍｕｎｉｃａｔｉｏｎａｎｄｍｅｄｉｃａｌｉｍａｇ ｉｎｇ ,ｔｈｅｐｒｏｂｌｅｍｏｆｔｗｏ ｄｉｍｅｎｓｉｏｎａｌｆｒｅｑｕｅｎｃｙｅｓｔｉ ｍａｔｉｏｎｈａｓｒｅｃｅｉｖｅｄａｌｏｔｏｆａｔｔｅｎｔｉｏｎｉｎｒｅｃｅｎｔｙｅａｒｓ.ＩｎｔｈｅｃａｓｅｏｆａｄｄｉｔｉｖｅｗｈｉｔｅＧａｕｓｓｉａｎｎｏｉｓｅ,ｎｕｍｅｒｏｕｓｍｅｔｈｏｄｓｓｕｃｈａｓＭＥＭＰ[1 ] ,ＭＵＳ…