嵌入式数字智能涡街流量计的设计开发

针对目前涡街流重计存在精度不高的问题，采用Toeplitz自相关矩阵近似的准牛顿算法，对涡街传感器输出信号进行数字信号处理。针对客户超低功耗的要求，开发设计以超低功耗的混合信号处理器(MSP430F149)为微处理器，以采用KS0713为控制器的LCD为液晶显示模块，符合HART总线协议的嵌入式智能涡街流量计。     

高雷诺数下双圆柱绕流的数值模拟

本文使用表面涡法研究高雷诺数下不同排列方式双圆柱绕流的流动状态，计算了双圆柱在并列、串列及级列的情况下的各种流动结构，涡街的变化及作用在圆柱上的受力情况。本文结果清楚地描述了双圆柱绕流复杂的流动状况，计算结果与实验显示的流动状况十分相似，斯特罗哈数和阻力系数与实验结果符合得很好。     

Wake and aerodynamics loads in multiple bodies—application to turbomachinery blade rows

Two-dimensional, unsteady flow around bodies of complex geometry (or multiple bodies) at high Reynolds number is simulated using the vortex method. This method is modified to take into account the sub-grid scale phenomena through a second order velocity structure function model adapted to the Lagrangian scheme. The dynamics of the body wake is computed using the convection-diffusion splitting algorithm; the convection process is carried out with a Lagrangian Adams-Bashforth time-marching scheme and the diffusion process is simulated using the random walk method. The pressure distribution is obtained using an integral equation derived from the pressure Poisson equation, which was first developed for a single body. Results for the numerical simulation around a linear cascade of airfoils are presented. As the flow is periodic in the y direction, the discrete vortex shedding need only be considered for a reference airfoil. The flow characteristics around the NACA 65-410 series airfoils are calculated and comparisons are made with results available in the literature.     

FLOW OF NEWTONIAN FLUIDS THROUGH SINUSOID ALLY CONSTRICTED TUBES. NUMERICAL AND EXPERIMENTAL RESULTS

Numerical and experimental predictions of pressure drops in the flow of Newtonian fluids through sinusoidally constricted tubes (SCT) are carried out. The numerical evaluations analyzed in this work are obtained from the following methods: Geometric Iteration (GJM), Geometric Iteration with First and Second Upwinds (GIM1, GIM2), Successive Over Relaxation by Line (SORBLM), Global Galerkin Spectral Method (GGSM), Collocation (CM) and Dufort-Frankel (DFM). The GIM1, GIM2 and SORBLM are applied to SCT and explained in this work. The other methods have been previously reported in the literature with the same purpose. Experiments are accomplished for constrictions of approximately 40,60 and 80% of the average tube diameter and results compare well with numerical predictions of the steady flow. It is concluded that special attention should be given to evaluations of the friction factor ƒ for Reynolds numbers Re between the onsets of flow separation and turbulence due to flow instability. Finally, the SCT as a model for porous media (PM) is discussed.     

涡流管类比逆流换热器方法的研究

结合Scheper，Lewins和Bejan的理论模型，对涡流管类比逆流换热器模型进行了深入地分析，得出了冷流分量对温度分离效应的函数关系式，为了解涡流管机理和实验中强化涡流管温度分离效应提供了理论依据。     

加氢裂化反应器新型冷氢箱的研究与工程设计

报道了加氢加化反应器新型旋流式冷氢箱的研究设计及实用效果，催化剂床层径向温差不大于5℃。     

Wind turbine response to parameter variation of analytic inflow vortices

As larger wind turbines are placed on taller towers, rotors frequently operate in atmospheric conditions that support organized, coherent turbulent structures. It is hypothesized that these structures have a detrimental impact on the blade fatigue life experienced by the wind turbine. These structures are extremely difficult to identify with sophisticated anemometry such as ultrasonic anemometers. This study was performed to identify the vortex characteristics that contribute to high‐amplitude cyclic blade loads, assuming that these vortices exist under certain atmospheric conditions. This study does not attempt to demonstrate the existence of these coherent turbulent structures. In order to ascertain the idealized worst‐case scenario for vortical inflow structures impinging on a wind turbine rotor, we created a simple, analytic vortex model. The Rankine vortex model assumes that the vortex core undergoes solid body rotation to avoid a singularity at the vortex centre and is surrounded by a two‐dimensional potential flow field. Using the wind turbine as a sensor and the FAST wind turbine dynamics code with limited degrees of freedom, we determined the aerodynamic loads imparted to the wind turbine by the vortex structure. We varied the size, strength, rotational direction, plane of rotation, and location of the vortex over a wide range of operating parameters. We identified the vortex conformation with the most significant effect on the blade root bending moment cyclic amplitude. Vortices with radii on the scale of the rotor diameter or smaller caused blade root bending moment cyclic amplitudes that contribute to high damage density. The rotational orientation, clockwise or counter‐clockwise, produces little difference in the bending moment response. Vortices in the XZ plane produce bending moment amplitudes significantly greater than vortices in the YZ plane. Published in 2005 by John Wiley & Sons, Ltd.     

INTERACTION OF VORTICES WITH A PROGRESSIVE SURFACE WAVE

ＩＮＴＥＲＡＣＴＩＯＮＯＦＶＯＲＴＩＣＥＳＷＩＴＨＡＰＲＯＧＲＥＳＳＩＶＥＳＵＲＦＡＣＥＷＡＶＥＷａｎｇＬｉｎ－ｌｉｎ；ＭａＨｕｔ－ｙａｎｇ（ＧｒａｄｕａｔｅＳｃｕｄｏｆＡｃａｄｅｍｉｃａＳｉｎｉｃａＢｅｉｊｉｎｇ１０００３９Ｐ．Ｒ．Ｃｈｉｎａ）Ａｂ...     

多机系统水力振动与能量损失分析

针对多机系统的机组振动差异问题,采用RANS-LES数值计算方法,模拟一管双机组内部流场,利用监测点压力脉动信息分析过流部件的振动强度,计算能量损失与机组效率。结果表明,部分开度下,岔管的水流分配不平衡导致两机组流场存在差异,影响过流部件压力脉动与振动强度。数据对比发现2号机组尾水管涡带极不稳定,振动更强,导致能量损失更多,效率下降更严重。