宽带功率放大器PGSC建模方法及预失真研究

针对宽带功率放大器的强记忆效应特性,提出一种功放建模和数字预失真方法——PGSC模型。利用广义记忆多项式(GMP)、特定交叉项(SCT)及记忆时刻信号交叉项(CIMT)3个基函数来构造功放行为模型及数字预失真器,并搭建实际测试平台对模型的精度及线性化效果进行验证。测试结果表明,与PMEC方法相比,PGSC方法建模时的归一化均方误差减少了2.1 dB,数字预失真时输出信号的三阶邻信道功率比降低了4.94/2.03 dB;与GMP方法相比,PGSC方法仅利用73%的系数即可得到更高的模型精度和更好的线性化效果。     

Dynamic deviation reduction‐based concurrent dual‐band digital predistortion

This article introduces the concurrent dual‐band digital predistortion (DPD) architecture with only one upconvertion unit, which is suitable for the linearization of wideband power amplifiers (PAs) excited by concurrent dual‐band signals. By extending the conventional dynamic deviation reduction (DDR) model to the concurrent dual‐band mode, we propose two DDR‐based concurrent dual‐band models, the dual‐band DDR (DB‐DDR) model and the simplified dual‐band DDR (SDB‐DDR) model. The performance of these two models is experimentally assessed with two types of wideband PAs (a GaN Class F PA and a GaN Doherty PA) driven by the concurrent dual‐band signal, and compared with the prior two‐dimensional digital predistortion (2D‐DPD) model and the two‐dimensional modified memory polynomial (2D‐MMP) model. The results prove the good DPD performance and low computational complexity of the proposed models. © 2013 Wiley Periodicals, Inc. Int J RF and Microwave CAE 24:401–411, 2014.     

—Review Paper—Current State-Of-The-Art Measurements Of Ozone In The Gas Phase And In Solution

This paper is a critical review and summary of the analytical procedures currently used by operating water utilities to control ozone treatment processes, considering disinfection as well as the many oxidative applications of ozone in water treatment applications. The role of common interferences in the various methods is described.

In operating U S., Canadian, European, and Japanese water treatment plants currently employing ozone as a primary disinfectant, ozone nearly always is followed by the addition of small quantities of chlorine, chlorine dioxide, or chloramine to provide the residual in the distribution system and to act as a secondary disinfectant. Clearly, the analytical procedures used must distinguish between the various species. This review critically presents these various factors and their implication with respect to “true values” of ozone determined under widely varying conditions.     

组合结构设计的双频带数字预失真方法

双频带射频功放的数字预失真技术(DPD)要求支持更宽的带宽.为了保证功放输出的线性指标并降低预失真系统的实现开销,设计一种组合结构的双频带宽带数字预失真方法.该方法采用一维整频带数字预失真模型与四个一维分频带数字预失真模型的组合结构来综合处理双频带的发射信号.仿真实验结果表明,采用90 MHz的双频带LTE信号,临道泄露比(ACLR)指标较改进的二维记忆多项式DPD有1 dB提升,与二维DPD有0.5 dB差别,满足系统指标要求.     

采用辅助转动装置的MIMO 系统双目标DPD 实验研究

文中介绍了一种双目标数字预失真(DPD)方案,并进行了实验研究。不增加系统复杂度的情况下, 可以有效地扩展MIMO 系统的线性化波束宽度。在发射机附近增设一个发射低功率信号的线性辅助转动装置,该 架构实现了MIMO 系统主波束线性化。实验平台由发射机系统和一个辅助转动装置组成,发射机天线阵列为1×4。 输入信号采用两个20 MHz 带宽峰均比分别为5. 7 dB 和5. 6 dB 的正交频分复用(OFDM)信号。实验研究结果表明, 采用了辅助转动装置的双目标DPD 方法后,邻信道功率比(ACPR)达到-50 dBc 以下的主波束线性化宽度可以扩展 到22°,同时信号归一化均方误差(NMSE)平均数值为-40 dB。该方案有效地拓宽了MIMO 系统线性化波束宽度。     

5G 功放DPD 的FPGA 宽带实现及自动优化

5G 宽带功放数字预失真器(DPD)的FPGA 实现过程中,常遇到数字处理带宽不够和资源有限问题,对 此,文中提出一种基于双路并行数据流的数字预失真带宽扩展方法和基于Zynq Ultrascale+ MPSoC 的自动化模型优化 验证方法,可快速实现对5G 宽带功放线性化方案的优化。使用该并行处理结构的数字预失真器,克服了数字电路最 大时钟频率造成的对FPGA 线性化带宽的限制,使得数字预失真电路在每个时钟周期内可以处理更多的数据,不仅有 效地增加了数字处理带宽,而且降低了DPD 的功耗。然而,这种带宽增加以消耗更多硬件资源为代价,对此,文中同时 提出了对预失真非线性模型的在线自动优化方法,以简化非线性模型、降低DPD 的硬件资源开销。最后,在Zynq Ultrascale+ FPGA 实验平台上实现了具有两路并行数据处理的I-MSA 自优化数字预失真电路,采用100 MHz 的5G 新无 线电(NR)信号在2. 6 GHz 功率放大器上进行线性化实验验证,获得了满意的预失真性能,验证了所提方法的有效性。     

DPD技术在软件无线电中的应用研究

重点对基于多速率数字信号处理的正交采样和解调等几点关键技术进行了研究。针对现有模拟和数字正交采样系统的优缺陷,论文就一种新的采样方法——DPD(Digitalproductdetector)采样技术,分别从时域和频域对该技术进行了理论分析和计算机仿真。     

生活饮用水中的余氯检测

利用DPD分光光度法测定生活饮用自来水的余氯含量。研究了不同浓度标准溶液吸光度随测定时间和温度的变化关系,从而确定了适宜的测定条件:测定时间10min以内,温度20℃。     

An implementation of no-slip boundary conditions in DPD

We report an implementation of the no-slip boundary condition in the modeling of solid boundaries by dissipative particle dynamics (DPD) method. Stimulated by a model for several types of solid boundaries, we develop an implementation that satisfies no-slip boundary condition with practically no-density distortion near the boundaries. The model is implemented to simulate the planar Poiseuille and Couette flows, as well as the flow through a contraction and diffusion channel. Results compare excellently with the previous methods.     

1Gb/s CMOS调节型共源共栅光接收机

基于特许0.35μm EEPROM CMOS标准工艺设计了一种单片集成光接收机芯片,集成了双光电探测器(DPD)、调节型共源共栅(RGC)跨阻前置放大器(TIA)、三级限幅放大器(LA,limiting amplifier)和输出电路,其中RGCTIA能够隔离光电二极管的电容影响,并可以有效地扩展光接收机的带宽。测试结果表明,光接收机的3dB带宽为821MHz,在误码率为10-9、灵敏度为-11dBm的条件下,光接收机的数据传输速率达到了1Gb/s;在3.3V电压下工作,芯片的功耗为54mW。