宽带固定增益放大器THS4302特性及应用

THS4302是TI公司推出的新型固定增益放大器，具有2.4GHz的带宽和 5V／V的固定增益。其性能是现有同类产品的四倍，可为高速应用系统提供高速低噪声的模拟解决方案。文中介绍了THS4302的特点、工作原理及使用注意事项，并在此基础上给出了几种典型应用。     

集成对数放大器

对数放大器由于其特殊的性能而在雷达接收机，通信、遥控和激光测距系统中具有十分广泛的用途。详细叙述了对数放大器的性能，特性，介绍了几种主要的对数放大器类型及其工作原理，考查了国外对数放大器的发展情况，介绍了国内集成对数放大器的主要性能指标及其用途。。     

数据转换系统中放大器的选择

随着广播电视技术的不断发展 ,模拟信号传输向数字信号传输的转换已成为必然。介绍模数转换系统中放大器的性能、关键技术 ,并就放大器的选择作详细探讨。     

超高速电流反馈集成运放电路与特性

介绍了超高速电流反馈集成运放电路结构，基本特性以及与电压反馈集成运放在性能上的差异。     

带有光放大的波分复用技术在光纤通信中的应用

本文论述了波分复用技术的优点及其应用；介绍了波分复用技术与光纤放大器相结合后的发展概况２；评述了波分复用技术发展中的主要问题及其在当前实用系统中的解决方案和今后的发展方向。     

Performance characteristics of a therapeutic ultrasound wire waveguide apparatus

Therapeutic ultrasound angioplasty has been investigated, clinically, by a number of researchers and represents a potentially promising therapy for the treatment of atherosclerotic lesions. To date, there has been no detailed analysis of the effect of mechanical design parameters, such as wire geometry or damping characteristics, on wire waveguide performance. An apparatus capable of delivering therapeutic ultrasound down small diameter nickel–titanium (NiTi) wire waveguides is described. The output peak-to-peak (p–p) displacements at the distal tip of a 1.0 mm diameter waveguide were measured experimentally, by means of an optical microscope and image analysis software. The output was measured for a range of waveguide lengths from 118 to 303 mm. Wire waveguide distal tip displacements as high as 98 μm (p–p) at 23.5 kHz were measured. For the range of lengths tested, the experimental measurements show the critical relationship between the length of the waveguide and the output distal tip displacements. A finite element model that can predict the resonant frequencies and distal tip displacements of various wire waveguide geometries and configurations, including the effect of damping, is presented. This numerical model has been validated against the experimental displacement data obtained. This will be a valuable design tool for ensuring the safety and effectiveness of therapeutic ultrasound angioplasty procedures.     

基于逻辑器件的可编程增益放大器设计

本文介绍了可编程增益放大器设计的方法。它主要由控制电路、放大电路、显示电路三大模块组成。该系统性能好、成本低、工作可靠,具有一定的工程应用价值,经测试表明,该设计基本上达到了设计的要求。     

Preparation of NaBiO3 and the electrochemical characteristic of manganese dioxide doped with NaBiO3

NaBiO₃ crystal of high purity has been synthesized through chemical oxidization. The morphology and thermal stability of NaBiO₃ were examined with scanning electron microscope (SEM) and thermogravimetry-differential scanning calorimetry (TG-DSC). The electrochemical properties of MnO₂ electrodes with and without doping NaBiO₃ were studied through galvanostatic charge/discharge and cyclic voltammetry. The results indicate that the MnO₂ electrode doped with NaBiO₃ possesses remarkably higher discharge voltage and capacity and better reversibility than the pure MnO₂ electrode and Bi₂O₃ doping MnO₂ electrode.     

Studies of structure and cycleability of LiMn2O4 and LiNd0.01Mn1.99O4 as cathode for Li-ion batteries

Lithium manganese oxides LiMn₂O₄ and rare earth elements doped LiNd_0.01Mn_1.99O₄ were synthesized by microwave method. The structure and the electrochemical performances of the samples were characterized. XRD data shows both samples exhibit the same pure spinel phase. But due to the introduction of Nd³⁺ ion into the unit cell, the lattice parameter of the Nd-doped spinel was larger than that of the undoped one. The two samples had a similar morphology including small particle size and homogeneous particle distribution as tested by SEM. The cyclic voltammmetry and constant-current charge-discharge tested that Nd-doped spinel displayed a better reversibility and cycleability.