Design and experimental investigation of the high efficiency 1.5 W/4.2 K pneumatic-drive G-M cryocooler

The development of a high cooling power and high efficiency 4.2 K two stage G-M cryocooler is critically important given its broad applications in low temperature superconductors, MRI, infrared detector and cryogenic electronics. A high efficiency 1.5 W/4.2 K pneumatic-drive G-M cryocooler has recently been designed and developed by ARS. The effect of expansion volume rate and operation conditions on the cooling performance has been experimentally investigated. A typical cooling performance of 1.5 W/4.2 K has been achieved, and the minimum temperature of the second stage is 2.46 K. The steady input power of the compressor at 60 Hz is 6.8 kW, while the operation speed of the rotary valve is 30 rpm. A maximum cooling power of 1.75 W/4.2 K has been obtained in test runs.     

The PAR(p) Interconfigurations model used by the Brazilian Electric Sector

This study discusses the characteristics of the Periodic Autoregressive model, PAR(p), which is used to generate synthetic series of inflow energies that serve as entries for computer platforms that implement the planning and expansion of the operations of the BES – the Brazilian Electric Sector (SEB – Sistema Elétrico Brasileiro). The methodology for the design of a generating plant is presented in addition to the fundamentals of the “PAR(p) Interconfigurations” Model, which is referred to as the Inflow Energy Generation Model (IEGM) in this study. The major contribution of this study is to provide the first scientific discussion of the representation of multiple configurations using the PAR(p) model. For this purpose, several topics related to the time series are discussed, such as the definition of the model order, the matter of stationarity and the need to address possible outliers. Finally, a case study is presented, wherein the results of the estimation and generation of the described model’s scenarios are demonstrated.     

基于CAN总线的舵机控制系统设计

主要介绍了一种基于CAN总线的舵机控制系统。系统以CAN总线作为通信方式，PWM控制信号通过硬件方式产生，具有结构简单、信号稳定和实时性强的特点。     

基于EPF10K30的ISA接口设计

随着计算机技术日新月异的发展。计算机控制已经深入到了各个领域，特别是在工业控制领域，计算机通过ISA总线与接口电路进行通信，然后由接口电路去控制被控设备，从而完成预期的控制工作．     

USB总线接口芯片CH371及其应用

CH371是一种新型USB通用总线接口芯片。利用该芯片可在不了解任何USB协议或固件程序甚至驱动程序的情况下，轻松地将并口或串口产品升级到USB接口。文中介绍了该接口芯片的主要特点和引脚功能，给出了CH371与其它总线进行接口的几种应用电路，同时给出了CH371与MCS-51单片机的接口程序。     

EISA系统总经与VESA局部总线

本文主要介绍ＥＩＳＡ系统总线与ＶＥＳＡ局部总线的特点与区别．     

新型磷系膨胀阻燃剂

介绍了一种新型磷酸盐,通过试验分析了其作为膨胀型阻燃剂对聚烯烃及热固性塑料的阻燃机理与阻燃效果;红磷 酚类体系在高温聚合物中有较好阻燃效果     

一种高效的硬布线控制CPU的设计方法

文章提出了一种硬布线逻辑CPU的设计流程，即以CPU设计工具软件LDF为核心的设计方法，其主要目的的提高硬布线逻辑CPU的设计效率。定义了一种用于描述硬布线控制逻辑的语言-MCDL，对总线优化问题进行了研究，并且给出了解决总线优化问题的近似算法。     

Effects of Seismically Induced Pounding at Expansion Joints of Concrete Bridges

This paper presents the result of a study on the effect of pounding at expansion joints on concrete bridge response to earthquake ground motions. An engineering approach, rather than continuum mechanics approach, is emphasized. First, the dynamic behavior of a damped multidegree-of-freedom bridge system separated by an expansion joint involving an impact is examined by means of the finite element method. Second, the sensitivity analysis of the stiffness in gap elements is performed. Third, usefulness of the analysis method for simulation of pounding phenomena is demonstrated and the effect of pounding on the ductility demands measured in terms of the rotation of column ends is investigated. Two-dimensional finite element analysis using a bilinear hysterestic model for bridge substructure joints and a nonlinear gap element for the expansion joint is performed on a realistic bridge with an expansion joint. The effects of the primary factors on the ductility demand such as gap sizes and characteristics of earthquake ground motion are investigated through a parametric study. The major conclusions are (1) the effect of impact most directly depends on the size of momentum (or pounding magnitude); and (2) the pounding effect is generally found to be negligible on the ductility demand for wide practical ranges of gap size and peak ground acceleration, but is potentially significant at the locations of impact.     

计算机串行通信综述

本文着重向读者介绍目前流行的几种计算机串行通信规程，它们是ＥＩＡ－ＲＳ－２３２Ｃ、ＥＩＡ－ＲＳ－４２２Ａ、ＥＩＡ－ＲＳ－４２３Ａ、ＥＩＡ－ＲＳ－４４９、ＥＩＡ－ＲＳ－４８５、ＡＲ－ＩＮＣ－４２９等。