Finite‐Element Implementation of a Self‐consistent Texture Model with a Hardening Law Based on Dislocation Densities

A self‐consistent texture model is implemented in the finite‐element code ABAQUS/Explicit®. Hardening of the slip systems is described by evolution laws for dislocation densities, and the Bauschinger effect is included. With these ingredients the cold rolling of an IF‐steel is simulated and the evolution of texture and anisotropy is examined. The use of the dislocation based hardening law is found to have a significant effect on the evolution of the anisotropic yield surface, but only very little influence on the texture. Furthermore, the hardening model is used to investigate the evolution of dislocation densities in differently oriented grains during plane strain compression. It is found that the dislocation density varies greatly depending on orientation, an observation which can help to explain the orientation dependence of recrystallization.     

IF钢冷轧及再结晶初期微观组织的TEM研究

采用透射电子显微镜对不同压下量和再结晶初期的IF钢样品进行了研究．结果表明：无论是在较小形变量下还是在较大形变量下，形变不均匀性是普遍存在的；冷变形程度不同，织构组分不同，TEM形貌也不同；在再结晶的最初期，冷轧的形变组织演变为近乎等轴的亚晶，优先形成{111}〈uvw〉取向的晶核，晶核逐渐吞并周围的形变基体而长大，最终形成再结晶γ-纤维织构．     

IF板与08Al板的成形性能研究

通过模拟成形性试验，对新型超深冲用IF钢板和传统冲压用08Al钢板的冲压成形性能进行了研究．结果表明：IF板的拉深性能、扩孔性能、胀形性能以及“拉深-胀形”复合性能等均优于08Al板，其中，扩孔性能和平面各向异性的改善最为显著；各项试验中，IF板的成形力普遍小于08Al板。     

Edge detection,three-dimensional cell boundary reconstruction and volume and surface area estimation from differential interference contrast images

Three-dimensional (3-D) cell morphology is important for the understanding of cell function and can by quantified in terms of volume and surface area. Differential interference contrast (DIC, or Nomarski) imaging can enable cell edges to be clearly visualized in unstained tissue due to the slight difference in refractive index between aqueous media and cytoplasm. DIC is affected in only one direction - the direction of the optical shear. A 1-D edge detector was used in that direction with a scale length equal to that of an in-focus edge to highlight cell boundaries. By comparison with the signal from the edge detector on an out-of-focus slice, the in-focus slices could be segmented and, after noise suppression, cell outlines obtained. A voxel paradigm was used to calculate cell volume and differential geometry was used for surface area estimation. We applied this approach to obtain 3-D dimensional information by optical sectioning of motile Amoeba proteus.     

A generalized approach to the reconstruction of a restricted class of digitized planar curves

Reconstruction of an original continuous curve and the estimation of its parameters from the digitized version of the curve is a challenging problem, as quantization always causes some loss of information. In this paper, we have developed a scheme for reconstruction which is applicable to a class of curves having at the most two parameters. The class of curves for which the scheme works has also been characterized. We have shown that for one-parameter curves the exact domain of values of the parameter can be obtained. But in the two-parameter case, only the smallest rectangle containing the domain can be realised. The distinctive feature of our scheme is that it provides a unified approach to solve the reconstruction and the domain-finding problem for a class of curves.     

高强IF钢析出物的析出特征

高强ＩＦ钢是汽车用深冲钢板中深冲性能最好的高强度钢板。目前，国际上对该钢种的研究十分活跃。本文在实验条件下，通过对高强ＩＦ钢析出物的观察研究了高强ＩＦ钢析出物的析出特征，发现了新的析出相ＴｉＦｅＰ，并对磷对深冲性能影响的作用机制，进行了探讨。     

析出物对IF钢性能的影响

一种阻性的晶闸管控制制动器被用于阻尼向串联补偿传输供电的热电发电机中的瞬态扭。重点放在开发适用的控制算，并通过多种不同的运行方式验证算法。作为一种制动器最优控制的可能方法，本文研究了离散等级一般化预先控制（ＧＰＣ），讨论了系统上ＧＰＣ执行过程中存在一些问题。用Ｐｒｏｎｇ分析来辩识系统传递函数，此传递函数与控制方案的考虑及强度特性有关。     

为莱钢做强做大提供强有力的自动化信息化技术支撑

主要介绍了自动化部近几年来在科技创新和管理方面的工作经验,如围绕莱钢生产建设全力推进技术创新;以“数字莱钢”建设为目标,加快推进莱钢信息化建设,所有这些都为莱钢提供了强有力的自动化信息化技术支撑。     

RH精炼真空度对超低碳钢夹杂物去除的影响

 大尺寸非金属夹杂物是引起超低碳钢冷轧钢板表面线状缺陷的重要原因。以IF钢为例,铸坯中大尺寸夹杂物主要有3类,即结晶器保护渣卷入后被凝固坯壳捕获;连铸过程中钢水二次氧化产生且未上浮去除的;钢液中未充分去除的夹杂物在浸入式水口处粘连、堵塞,后续堵塞物脱落被凝固坯壳捕获。钢液一次脱氧生成的夹杂物中,不低于100 μm的夹杂物在RH处理过程中较容易去除,100 μm以下的夹杂物受钢液的流动影响较大,特别是不超过20 μm的夹杂物由于其上浮时间长、钢液流动的跟随性好,去除难度较大。RH是超低碳钢最重要的精炼设备,也是夹杂物去除的关键环节,研究RH去除20 μm夹杂物的新技术具有重要的意义。研究了RH脱碳结束加铝后真空度对夹杂物去除的影响,创新性提出了低真空度去除不超过20 μm夹杂物的新技术。研究结果表明,与高真空度处理工艺(常规工艺)相比,低真空度(压力5 kPa)处理的钢液中夹杂物数量降低更显著,中间包钢液总氧质量分数平均降低0.000 2%,钢液增氮水平相当。冷轧钢板因炼钢原因导致的线状缺陷降级率比常规工艺降低了29%。夹杂物在钢液中的跟随性理论分析表明,低真空度处理工艺下RH内钢液循环流量和钢液流速减小,降低了RH处理过程中夹杂物随钢液的跟随性,提高了不超过20 μm夹杂物的去除效率,有效改善了水口堵塞程度、提高了轧板表面质量。     

IF钢切边质量提升控制技术

针对 IF 钢经过连退或镀锌热处理,在切边过程中由于切边质量不佳,带钢边部容易产生毛刺等缺陷,进而影响带钢边部质量的问题,通过研究切边后带钢切断面各区域比例以及切边工艺参数对切边后切断面各区域比例的影响,对圆盘剪切边工艺参数进行了优化设计;同时通过研究去毛刺辊工作原理以及亮边缺陷产生原因,对去毛刺辊的涂层和底辊辊型进行了优化设计。采取优化措施后,IF 钢的切边质量得到了改善,并彻底消除了亮边缺陷。