Omics Analysis of Blood-Responsive Regulon in Bordetella pertussis Identifies a Novel Essential T3SS Substrate

Bacterial pathogens sense specific cues associated with different host niches and integrate these signals to appropriately adjust the global gene expression. Bordetella pertussis is a Gram-negative, strictly human pathogen of the respiratory tract and the etiological agent of whooping cough (pertussis). Though B. pertussis does not cause invasive infections, previous results indicated that this reemerging pathogen responds to blood exposure. Here, omics RNA-seq and LC–MS/MS techniques were applied to determine the blood-responsive regulon of B. pertussis. These analyses revealed that direct contact with blood rewired global gene expression profiles in B. pertussis as the expression of almost 20% of all genes was significantly modulated. However, upon loss of contact with blood, the majority of blood-specific effects vanished, with the exception of several genes encoding the T3SS-secreted substrates. For the first time, the T3SS regulator BtrA was identified in culture supernatants of B. pertussis. Furthermore, proteomic analysis identified BP2259 protein as a novel secreted T3SS substrate, which is required for T3SS functionality. Collectively, presented data indicate that contact with blood represents an important cue for B. pertussis cells.     

2Mbit/s高速信令链路在移动通信七号信令网中的应用

通过对2Mbit/s高速信令链路原理、特点的介绍，阐明了该技术在现阶段使用的实际意义，并给出了2Mbit/s高速信令链路在移动通信七号信令网中的应用。     

Corrosion Behavior of 316LN and 316 Stainless Steels During Long-term Exposure to Aerated 0.5 M NaCl Using Electrochemical Noise Technique

In the present work 316LN as well as 316 stainless steel (SS) coupons each of dimensions (0.025 × 0.018 × 0.006 m³) in well-polished condition were used as two nominal electrodes which were immersed in the aerated solution of 0.5 M NaCl. Correlated current and potential electrochemical noise (EN) signals were collected at 1 Hz sampling frequency for 1 h daily over a period of 30 days. The detrended EN data were used to calculate the noise resistance (R _N) as well as the spectral noise resistance at zero frequency (R _SN^o) values and other statistical parameters. To study the nature of pits and distribution of their diameters as well as depths, extensive observations of the pitted and the blank specimens were carried out using Confocal Laser Scanning Microscopy (CLSM). The current and the potential records of the two alloys showed distinct differences in their corrosion behavior. It was observed that within less than 4 h of immersion, 316SS showed signals indicative of unstable pitting and onset of stable pitting was noticed after 48 h of exposure. However, until about 24 h, 316LN showed just the random signals and unstable pitting was observed after 28 h. The signals clearly indicated continuous growth of the stable pits in 316SS as against the repassivation of the unstable pits in 316LN after 7 days exposure. It was observed that R _N values showed a continuous decrease in the case of 316SS, but were quite stable in the case of 316LN over the exposure period. Concurrent to these observations it was observed that 316SS specimen was extensively pitted. The frequency distributions of pit diameters as well pit depths were observed to be highest at 10-20 μm and 5-10 μm, respectively. However, pits with as large as 70-80 μm diameter and as deep as 20-25 μm too were observed. No pits were observed in case of 316LN even after 30 days of exposure, an observation that corroborates well with the stable R _N values. Thus, in the present investigation, the long-term tests using EN technique coupled with CLSM studies conclusively prove that many unstable pits initiated in 316SS turn into stable ones resulting in insidious localized corrosion attack whereas the unstable pits initiated in 316LN get passivated in the simulated coastal environment.     

薄板坯连铸生产SS400钢工艺技术研究

对唐钢薄板坯连铸机生产的SS400钢的生产工艺进行了分析,认为薄板坯连铸机生产的SS400钢,在采取了精炼站在线定氧,将钢水全氧控制在25×10~(-6)左右,同时连铸采取保护浇注和轻压下等技术后,能够确保薄板坯连铸SS400钢的顺利浇注,轧制的板带材表面质量良好,机械性能符合要求。     

直接序列扩展频谱中伪码优选研究

本文从最优化理论和工程实际出发，全面分析和完善了直接序列扩展频谱中伪码的数学模型，在此基础上，建立了一种较准确的伪码优选数学模型，并探讨了合适的搜索算法。     

滇池环湖截污干渠错峰技术模拟与分析

为了实现滇池流域截污效果的最大化,基于前期建立的东岸排水管网SWMM模型,结合该区域1995-2016年间降雨资料,研究环湖截污干渠的错峰调蓄技术。根据雨水干渠液位高度执行不同控制模式:当水位低于6.76 m时执行典型污染物浓度阈值控制模式;当水位高于6.76 m时执行典型污染物阈值控制的同时执行液位-污染物通量控制模式。采用SS和TN作为干渠截流的典型污染物控制指标,其控制浓度阈值分别取12和5 mg/L。模拟重现期为0.5~1 a降雨时SS、TN浓度-负荷通量调蓄方案下干渠负荷收集情况,结果表明两种调蓄方案均能有效提高雨水干渠的负荷收集率,提高污水干渠出口浓度,降低雨水径流对污水厂的高水量和低浓度冲击负荷。随着重现期增大,干渠对污染物的高效和最大化收集效果越明显。但是TN调控下污染负荷收集效果优于SS,因此选择TN作为干渠截流的最优典型污染物控制指标。     

无人机上行链路数据传输方案

为保证无人飞机在动态环境下数据传输的稳定性和可靠性,提出了一种循环正交M元扩频上行链路数据传输方案。按此方案传输数据,发送信号不存在潜在的周期性,系统的抗干扰和抗截获性能得到了很好的保障。在动态环境中,由于载体具有较大的加速度,载波多普勒频移剧烈变化,普通接收机载波跟踪环极易失锁,故提出一种基于经验值查表的载波跟踪算法,在锁频环内引入经验值查找表,环路能自适应调整环路滤波器带宽,从而实现任意时刻的高精度载波跟踪。     

Fe和两种工业钢在500℃含氯气氛中ZnCl2-KCl盐膜下的腐蚀

研究了纯Fe,NF616和SS304钢在500℃含氯气氛中ZnCl2-KCl盐膜下的腐蚀行为.结果表明,3种材料都发生了加速腐蚀,生成了较厚的氧化膜,且在氧化膜与基体金属之间出现了熔融状氯化物混合盐.此外,合金在此环境中的抗腐蚀性随其Cr含量的提高而显著提高,这是在腐蚀过程中氧化膜内层出现了Fe-Cr尖晶石或Cr2O3阻挡了金属离子快速向外扩散的结果.讨论了材料发生加速腐蚀的机制.     

Magnetic field-assisted photochemical machining (MFAPCM) of SS316L

In this paper, a new technique of photochemical machining (PCM) process has been described. The objective of this study is to investigate the effect of applying a magnetic field on the PCM of AISI 316?L stainless steel. The experiments were planned and conducted using a Full Factorial Design (FFD) approach. The control parameters selected were magnetic field, temperature, concentration and time. The analysis of the results shows significant improvement in the etch rate due to the application of a magnetic field. The highest etch rate was achieved at a concentration of 700?g/l, at the temperature of 60°C in a static magnetic field. The improvement of the etch rate is 2.5 times with the application of magnetic field as compared to the conventional PCM process.