热分解法制备钛酸铅镧薄膜及其电性能研究

本文研究了用金属有机物热发解法制备ＰＬＴ８薄膜的工艺过程和基片对薄膜结构的影响，并且给出了铁电性能的测量结果。     

用金属有机化合物制备铁电薄膜：工艺及进展

本文概述了以金属有机化合物为原料制备铁电薄膜的工艺过程、工艺特点及最新研究进展，着重介绍了金属有机物化学气相溶积（ＭＯＣＶＤ），金属有机物热分解（ＭＯＤ）以及溶胶－凝胶（Ｓｏｌ－Ｇｅｌ）三种制备技术在铁电薄膜制备领域中的应用。     

Substrate effect on the temperature coefficient of resistance of La0.7Ca0.3MnO3 thin films prepared by metal organic deposition

Epitaxial La_0.7Ca_0.3MnO₃ (LCMO) thin films were successfully prepared by the metal-organic deposition process on various (001) single-crystal substrates: MgO, LaAlO₃ (LAO), SrTiO₃ (STO), and (LaAlO₃)_0.3-(SrAlTaO₆)_0.7 (LSAT). The crystallinity and the epitaxial growth of the LCMO films were characterized by X-ray diffraction (θ − 2θ scans and pole-figure analysis). The temperature dependence of the resistance of the LCMO/LSAT, LCMO/STO and LCMO/LAO films exhibit typical characteristics with a transition from the paramagnetic-insulator state to the ferromagnetic-metallic state at a temperature peak (T _p ) ranging from 258 to 270 K. However, the LCMO/MgO films exhibited a semiconducting behavior without any transition. Based on the R(T) measurement, we calculated the temperature coefficient of resistance (TCR) for a bolometric application and we obtained 22%/K, 10.2%/K and 27.5%/K for the film grown on the LSAT, STO and LAO substrates, respectively. This difference in the TCR properties is related to the strain induced by the lattice mismatch between LCMO and the different substrates.     

基于神经网络的全自动模式识别跟踪系统

建立了一个基于神经网络的全自动模式识别跟踪系统。通过MOD算法提取出各个运动目标的特征向量后，利用神经网络对各个目标自动进行模式分类。文中同时给出了在复杂背景下多个运动目标自动跟踪与识别的实验结果。     

CPR1000全厂断电事故瞬态特性分析

用RELAP5/MOD3.4程序对CPR1000压水堆一回路系统进行整体建模,分析全厂断电事故下一回路主要参数的瞬态热工水力特性,并将RELAP5模型计算结果与THEMIS程序的计算结果进行对比,二者符合得较好。计算结果表明：该模型可较准确地模拟CPR1000在事故下的热工水力特性。     

新一代数据库技术在CSCW中的应用

支持协同工作是最重要的数据库应用之一。分析CSCW对数据库的要求,并从科研角度出发,具体阐述分布式数据库、时态数据库、实时数据库、主动数据库、移动对象数据库、时空数据库以及其它数据库(如协同数据库、多版本数据库等)等新一代数据库技术在CSCW中的应用。     

非能动余热排出系统数学模型研究与运行特性分析

利用某型核动力装置非能动余热排出系统1:10原理性试验的8个稳态工况、6个启动工况的试验数据,验证RELAP5/MOD3.2程序对本类型非能动余热排出系统的适用性。结果表明:垂直管内蒸汽凝结换热系数对两相流自然循环的流动与传热影响大;RELAP5/MOD3.2程序过低估算了垂直管内蒸汽流速对蒸汽凝结换热系数的影响,计算结果与试验结果偏差大。对RELAP5/MOD3.2程序垂直管内的蒸汽凝结换热模型进行修正,修正后的计算结果与试验值基本吻合;采用RELAP5程序对垂直管内两相流自然循环传热进行计算,须选择热前沿跟踪模型。对非能动余热排出系统的稳态与瞬态运行特性进行分析,理论计算与试验结果均表明:稳态工况下,系统可以实现稳定的两相流自然循环,系统排热能力受蒸汽发生器水位的影响大,冷却水入口温度与系统压力的影响相对较小;系统的启动特性良好,可快速地建立环路的自然循环,带走反应堆的衰变热。     

Stress singularity analysis in the restorations of premolar class ii cavities

Abstract

This paper presents the singular stress analysis near the apex of a structure formed during dental restoration of a premolar class II cavity. Based on the elasticity theory, the stresses may go to infinity at the junctions of different materials (e.g. dentine, enamel, restoration materials). Tensions will cause material separation and then material fracture. In order to reduce the failure probability, the degree of stress concentration has to be reduced. The stress singularity order and the stress intensity factor are two parameters, which are often used in fracture analysis. The objective of this paper is to find conditions such that non‐singular stress fields are possible. Three critical positions in the restoration structure are discussed.

They are the tips of interface between (1) enamel and restoration; (2) dentine and restoration; and (3) enamel, dentine and restoration. In the last two cases, the restoration may be bonded or debonded to enamel or dentine. After employing Kolosov‐Muskhelishvili complex functions together with the eigenfunction expansion method, the singularity orders are computed theoretically. Weak stress singularity conditions can be sought by properly selecting cutting angles or restoration materials.     

Metal Organic Deposition of Lanthanum Zirconate Buffer Layer on Biaxially Textured Ni-5%W Substrate

In this study,a simple template consisted of Y2O3 and La2Zr2O7 (LZO) layers was fabricated on rolling assisted biaxially textured Ni-5at%W substrates for YBa2Cu3O7-δ (YBCO) coated conductors.A thin sputtered Y2O3 layer (～20 nm) was introduced as a seed layer in order to induce epitaxial growth of metal organic deposited LZO layer.The effects of Y2O3 layer,annealing temperature and dwelling time on the phase and texture of the LZO films were systematically investigated.X-ray diffraction exhibited that the LZ...     

金属有机物热分解法制备锆钛酸铅薄膜研究

采用金属有机物热分解（ＭＯＤ）法，通过对原料的提纯和合成工艺的优化，消除原料中的微量杂质，控制环境温度，从而获得了透明、稳定的锆钦酸铅先体溶液．锆铁酸铅先体溶液经过多次成膜，在Ｐｔ／ＳｉＯ２／Ｓｉ基片上制备出厚度为０．６ｕｍ，均匀、无裂纹、无针孔的薄膜．经５５０℃保温处理后，得到假立方晶系的钙钦矿结构的薄膜．借助扫描电镜形貌分析表明，其晶粒大小约为２～３μｍ．