Wavelength and Waveband Assignment for Ring Networks Based on Parallel Multi‐granularity Hierarchical OADMs

In this paper we study the optimization issues of ring networks employing novel parallel multi‐granularity hierarchical optical add‐drop multiplexers (OADMs). In particular, we attempt to minimize the number of control elements for the off‐line case. We present an integer linear programming formulation to obtain the lower bound in optimization, and propose an efficient heuristic algorithm called global bandwidth resource assignment that is suitable for the design of large‐scale OADM networks.     

Dynamic Waveband Switching in WDM Mesh Networks Based on a Generic Auxiliary Graph Model

Waveband switching (WBS) is a promising technique to reduce the switching and transmission costs in the optical domain of a wavelength-division multiplexing (WDM) network. This paper considers the problem of provisioning dynamic traffic using WBS in a WDM mesh network. The network of interest is a homogeneous WBS network, where each node has the functionality of WBS. The problem is called the dynamic WBS problem, which involves searching waveband-routes or wavelength-routes for the dynamically arriving traffic requests. The objective is to minimize the total switching and transmission costs in the optical domain. To solve the dynamic WBS problem, an auxiliary graph model capturing the network state is proposed. Based on the auxiliary graph, two heuristic on-line WBS algorithms with different waveband grouping policies are proposed, namely the wavelength-first WBS algorithm based on the auxiliary graph (WFAUG) and the waveband-first WBS algorithm based on the auxiliary graph (BFAUG). Simulation results indicate that WBS is an attractive technique which reduces the overall switching and transmission costs by up to 30% in the network. The results also show that the WFAUG algorithm outperforms the BFAUG algorithm in terms of port savings and cost savings.     

CAD OF MILLIMETER WAVE OSCILLATORS WITH THE FDHB TECHNIQUE

In this paper the modelling, analysis and optimization of millimeter wave oscillatorsare investigated by using the a frequency-domain harmonic balance technique (FDHB), where theexternal-circuit impedances looking outside from the active device are calculated with a combinedtechnique of modes expansion, Galerkin, and collocation methods. The optimization results arein agreement with the experimental ones, which show the reliability of the presented model andoptimization.     

新型雷达干扰材料--导电聚苯胺

导电聚苯胺(PAN)是一种具有潜在应用价值的新型射频与微波吸收剂。在聚苯胺中添加各种导电填料如碳黑、石墨、金属粉或通过化学掺杂，可使电导率得到显著提高，而且比重小、易加工成型。本文简述其合成方法，用XRD、FTIR对其结构进行表征，初步测试了该材料对毫米波雷达的衰减效果，测试结果表明导电聚苯胺在8mm波波段具有衰减性。     

一种固定阈值的毫米波图像边缘检测方法

文章提出了一种固定阈值的毫米波图像边缘检测方法。根据图像的统计特征确定出像素的标准梯度强度，并采用单阈值对图像进行边缘粗定位，然后施行非最大抑制处理和滤波，得到最终检测结果。由于该算法对各幅毫米波图像设置相同的阈值，故能实现自动检测，同时还具有计算量小的特点。实验结果表明该方法进行毫米波图像边缘检测的有效性和可行性。     

车载毫米波雷达Bootloader的设计与实现

毫米波雷达用于盲区监测系统时,一种连接方法是仅一个雷达挂接在车身网络上,而另一个雷达无法直接与车身网络通信,因此也无法通过OBD直接升级软件。该文提出一套基于UDS的软件升级方案,在传统下位机Bootloader中增加主从通讯功能,使得两个雷达能同时完成软件升级。经实际应用,设计的Bootloader在盲区监测系统和前碰撞预警系统中都能可靠地升级应用软件。     

光纤无线电系统中的新型探测法研究

光纤无线电系统利用光载波携带毫米波信号在中心站和基站之间构成上行和下行传输链路,能够满足宽带无线接入系统的需求.利用光外差的方法产生毫米波信号是光载毫米波最简单和直接的方式.分析了在光纤无线电系统中利用光纤布拉格光栅从可调谐激光器中反射出两束相位近似相等的相干光,采用平衡探测产生了毫米波信号,降低了相位噪声和强度噪声对产生的毫米波信号的影响.     

大型剧院火灾自动报警系统设计

结合大型剧院火灾自动报警系统工程设计实例,分析、比较剧院入口大厅、观众厅及舞台区域高大空间火灾探测器的选择,阐述在高大开放式空间建筑中怎样合理地选择火灾探测器。     

基于LCTF成像和ABS算法的小白菜光谱特征波段提取研究

基于液晶可调滤波器(LCTF)和CMOS组合的多光谱成像系统,在435~720nm波段范围内,以每隔5nm波段对小白菜叶片进行灰度值信息的提取,然后求出各个波段的灰度值平均值、标准差以及相关系数,并采用自适应波段选择法(ABS)提取出小白菜叶片的波段指数,最后通过波段指数的排序选取出小白菜叶片的有效特征波段。实验结果表明,用ABS的特征波段提取的算法,能够快速有效地获取小白菜叶片的光谱信息,在445nm、450nm、455nm、680nm、685nm、690nm、695nm和710nm波段具有较理想的波段指数值,有较大的光谱信息量。因此,这些波段可以很好地作为识别小白菜叶片的有效特征信息波段。     

新型高效率二次谐波宽带可调复合互作用回旋管

该文利用回旋管注-波模式耦合理论,提出了返波振荡-速调群聚-行波放大复合互作用回旋管工作原理。理论分析表明,Ka波段二次谐波连续磁调谐复合互作用回旋管的工作效率高达40%,磁调谐带宽为10%。利用该复合互作用工作原理,回旋管振荡器可实现毫米波电磁辐射源的高效率、高功率输出及宽频带连续磁调谐。