Effects of high-pressure-modified soy 11S globulin on the gel properties and water-holding capacity of pork batter

The effects of high-pressure-modified soy 11S globulin (0.1, 200, and 400 MPa) on the gel properties, water-holding capacity, and water mobility of pork batter were investigated. The high-pressure-modified soy 11S globulin significantly increased (P < 0.05) the emulsion stability, cooking yield, hardness, springiness, chewiness, resilience, cohesiveness, the a^* and b^* values, and the G′ and G′′ values of pork batter at 80 °C, compared with those of 0.1 MPa-modified globulin. In contrast, the centrifugal loss and initial relaxation time of T_2b, T₂₁, and T₂₂ significantly decreased (P < 0.05). Meanwhile, the microstructure was denser, and the voids were smaller and more uniform compared with those of 0.1 MPa-modified globulin. In addition, the sample with 11S globulin modified at 400 MPa had the best water-holding capacity, gel structure, and gel properties among the samples. Overall, the use of high-pressure-modified soy 11S globulin improved the gel properties and water-holding capacity of pork batter, especially under 400 MPa.     

Interfacial microstructure and mechanical properties of Ti3SiC2 ceramic and TC11 alloy joint diffusion bonded with a Cu interlayer

Reliable joints of Ti₃SiC₂ ceramic and TC11 alloy were diffusion bonded with a 50 μm thick Cu interlayer. The typical interfacial structure of the diffusion boned joint, which was dependent on the interdiffusion and chemical reactions between Al, Si and Ti atoms from the base materials and Cu interlayer, was TC11/α-Ti + β-Ti + Ti₂Cu + TiCu/Ti₅Si₄ + TiSiCu/Cu(s, s)/Ti₃SiC₂. The influence of bonding temperature and time on the interfacial structure and mechanical properties of Ti₃SiC₂/Cu/TC11 joint was analyzed. With the increase of bonding temperature and time, the joint shear strength was gradually increased due to enhanced atomic diffusion. However, the thickness of Ti₅Si₄ and TiSiCu layers with high microhardness increased for a long holding time, resulting in the reduction of bonding strength. The maximum shear strength of 251 ± 6 MPa was obtained for the joint diffusion bonded at 850 °C for 60 min, and fracture primarily occurred at the diffusion layer adjacent to the Ti₃SiC₂ substrate. This work provided an economical and convenient solution for broadening the engineering application of Ti₃SiC₂ ceramic.     

The new intra-urban dynamics: Suburbanisation and functional specialisation in French cities

This article examines the relationships between the employment suburbanisation from central cities towards their suburbs, and the process of intra-urban specialisation that occurred simultaneously in the fifty largest French metropolitan areas. A methodology is proposed to identify urban subcentres and to analyse the effects of the intra-urban specialisations on suburbanisation patterns. We conclude that the specialisation of both subcentres and central cities has a significant effect on suburbanisation rates. Lastly, an intra-metropolitan shift/share analysis provides additional insights into the employment dynamics of central cities and suburbs during the last twenty years. Received: 25 July 2000 / Accepted: 29 May 2001     

基于Multisim8的压控振荡电路仿真分析

介绍了Multisim8的仿真功能的特点，并通过实例说明了用Multisim8进行仿真分析的具体方法，简单介绍了如何设置参数和进行仿真操作。     

优化改造油田生产工艺 增产增效提高环保水平——涠洲11-4油田生产工艺优化改造实践

油田生产水处理和海管输油能力不足是制约涠洲11-4油田生产和影响生产安全的瓶颈问题。合理利用油田原有设施和条件,对生产水处理系统和输油管道系统进行工艺优化改造,使该油田B平台海管运行的安全可靠性得以明显提高,并使油田生产水处理能力和处理质量得到有效改善,同时大幅度降低了油田生产成本,拓宽了油田增产挖潜的空间。涠洲11-4油田优化改造生产工艺实践经验,可为进一步拓宽海上老油气田的生产管理思路提供参考。     

不同品种甜菜类型甜菜光合特性的研究

水文研究了甜菜生育期中不同品种类型甜菜的光合特性，结果表明在生育前期，高糖型品种的叶绿素含量高，而生育中前期以丰产型高，标准型介于二者之间，ＲｕＢＰ竣化酶活性的动态变化亦显这种趋势；在叶丛形成期和块根增长期，丰产型品种光合速度最高，在糖分积累期则以高糖型品种光合速度高；不同品种不同叶位的叶绿素含量与光合速率中呈正相关。     

Efficient and optimal exponentiation in finite fields

Optimal sequential and parallel algorithms for exponentiation in a finite field containing F _q are presented, assuming thatqth powers can be computed for free.     

Consumer preference not to choose: Methodological and policy implications

Residential consumers remain reluctant to choose new electricity suppliers. Even the most successful jurisdictions, four US states and other countries, have had to adopt extensive consumer education procedures that serve largely to confirm that choosing electricity suppliers is daunting. Electricity is not unique in this respect; numerous studies find that consumers are generally reluctant to switch brands, even when they are well-informed about product characteristics. If consumers prefer not to choose, opening regulated markets can reduce welfare, even for some consumers who do switch, as the incumbent can exploit this preference by raising price above the formerly regulated level. Policies to open markets might be successful even if limited to industrial and commercial customers, with residential prices based on those in nominally competitive wholesale markets.     

Sex pheromones of male yellowfin Baikal sculpin (Cottocomephorus grewingki): Isolation and chemical studies

Three components of the male yellowfin Baikal sculpin pheromonal signal have been isolated from urine by diethyl ether extraction, thinayer chromatography (TLC), and high-performance liquid chromatography (HPLC). Using mass spectrometry, we have identified two of them as testosterone (T) and 11-hydroxytestosterone (11HT). These steroids are synthesized in testes during full spermatogenesis, and they are excreted in male urine with milt. The third component is not a steroid. It is more likely to be a polyene alcohol (farnesol). 2Z,6E-Farnesol possesses behavioral activity.     

基于Multisim的稳压电路的仿真分析

介绍使用7805设计了+5V稳压电路,使用LM317设计了可调稳压电源,可调范围为2.5V-7.5V,并对一些常用的参数进行了计算,同时给出Multisim仿真电路图。同时通过Multisim对整流电路,滤波电路和稳压电路的进行了仿真分析。利用虚拟软件可以设计出满足不同要求的电源分配系统,同时也可以对大多数模拟电路有很好的设计辅助作用。