一种基于bit位的运动补偿方法

本文讨论了等离子体显示屏所特有的在显示运动画面时出现的伪轮廓线现象，对产生的原因进行了分析并给出了软件模拟的结果。在此基础上，提出了一种基于bit位的运动补偿方法来改善运动图像的画面质量，同时根据人眼的视觉特征对补偿方法做了进一步的优化。最后对基于bit位的运动补偿方法进行了比较和验证，结果表明基于bit位的运动补偿方法可以基本消除运动画面的伪轮廓线现象。     

彩色PDP用玻璃基板

本文讨论了彩色ＰＤＰ现用钠钙玻璃的热稳定性，指出由于这种玻璃在热处理过程中易变形和收缩，因而不适合作大面积彩色ＰＤＰ基板材料，介绍了彩色ＰＤＰ基板玻璃的制造方法和特点。最后介绍了日本旭硝子公司和美国康宁公司各自为彩色ＰＤＰ新开发的玻璃基板材料ＰＤ２００和ＣＳ２５。     

PDP用铝酸盐荧光粉的制备技术研究进展

PDP用铝酸盐荧光粉的合成技术是发光材料领域的研究热点之一。对该类荧光粉的各种合成方法进行了综述，重点介绍了各种方法的特点和研究现状。认为喷雾热解法和化学共沉淀法是具有潜力的合成技术，若能解决颗粒大小和形貌控制等关键技术。将有望取代传统的高温固相法，具有良好的发展前景。     

IP网络资源调度与接纳控制技术研究

从IP QoS技术的研究现状出发,结合IETF的研究成果与电信网NGN的技术发展方向,阐述基于策略的端到端接纳控制框架的技术原理,在各大标准组织的技术框架内,给出一个具体的、切实可行的实现方法。     

Improving Thermal Stability of BaMgAl10O17:Eu Phosphor

Heterogeneous precipitation method was used to prepared surface coating on self-made BaMgAl10O17:Eu phosphor. Results illustrate that the coating film can be silicon dioxide in amorphous state with 50 nm in thickness. Photoluminescence results indicate that the coating layer presents an observable improved effect on the enhancement of thermal stability. When baked at 600 ℃ for 1 h, the luminance of coated BAM keeps at 92% higher than that of uncoated BAM by 23%. This protective effect can be attributed to the high compact degree and uniformity of this amorphous SiO2 coating film which is served as a diffusion block layer to inbreak oxygen atom, thus releases the oxidation extent of Eu2 effectively.     

光柱显示技术探讨

本文叙述自动化仪表用光柱显示技术的工作原理及器件结构，重点论述直流等离子体光柱，发光二极管光柱，真空荧光及液晶光柱器件的结构和驱动电路，还展望光柱显示的发展趋势。     

Effect of intensified discharge in the vicinity of ribs on PDP performance

It was determined that the discharge in the vicinity of ribs should be intensified to obtain low‐voltage, high‐luminous efficacy, and high module efficiency. One possible way is to increase the space between ribs and the discharge surface. Even if the amount of space increases by only 2 or 3 µm, it still results in low discharge voltage, large discharge current, and high luminous efficacy. For that reason it might be important to control the micron‐sized particles included in the MgO crystal dispersed layers. Another preferable way is to use ribs with a low electric permittivity (ε) that are represented by porous ribs. Moreover, low‐ε ribs diffuses the high‐energy spots in plasma, resulting in a high luminous efficacy. They feature a significantly lower sustain voltage and a smaller parasitic capacitance as well to facilitate a help high module efficiency. Also, highly porous ribs are expected to increase their practical use in aspects of mechanical strength and impurity gas exhaustion.     

基于图像信息的彩色PDP动态子场编码优化方法

为改善累积发光驱动方法显示静态图像时的灰度级轮廓,提出了一种基于有效灰度级均匀分割采样的动态子场编码(DSC)算法。首先对输入图像中的孤立灰度区间进行灰度采样,然后对剩余灰度级均匀分割,选择各灰度区间概率密度较大的灰度级作为采样灰度级,相邻采样灰度级之差即为子场编码权值,从而使采样灰度级均匀分布在输入图像的有效灰度区间,并使采样灰度级和子场编码权值随图像变化。仿真和实验结果表明,该算法不仅能真实再现大面积的背景,而且使图像细节信息尽可能保留,显著减小了静态图像的轮廓。     

基于FPGA的高性能可编程数据平面研究综述

可编程数据平面(PDP)一方面支持网络应用的卸载与加速, 给网络应用带来了革命性的发展机遇; 另一方面支持新协议、新服务的快速实现和部署, 促进了网络创新和演进, 是近年来网络领域的研究热点. FPGA因其通用的计算架构、丰富的片内资源和扩展接口提供了多种可编程数据平面的具体实现, 支持更广范围的应用场景. 同时, FPGA还为探索更通用的可编程数据平面抽象提供了可能. 因此, 基于FPGA的可编程数据平面受到了学术界与产业界的广泛关注. 首先分类别阐述基于FPGA的可编程数据平面(F-PDP)抽象. 接着, 介绍基于F-PDP快速构建网络应用的关键技术的研究进展. 之后, 介绍基于F-PDP的新型可编程网络设备. 此外, 从提升网络性能、构建网络测量框架以及部署网络安全应用这3个方面, 详细梳理近年来基于F-PDP的应用研究成果. 最后, 探讨F-PDP未来可能的研究趋势.     

A reduction method of dynamic false contour utilizing the frame‐rate‐control method with suppression of the side effect on PDPs

Abstract— The plasma‐display panel (PDP) is a type of flat‐panel display that can display a high‐quality image. However, when moving images are displayed, annoying disturbances such as false contour noise occurs. This noise is called dynamic false contour (DFC). To achieve a higher‐quality image, DFC has to be reduced. Therefore, a new method to reduce DFC is proposed. To find a way to reduce DFC, a new evaluation value for it has been defined: the evaluation value of dynamic false contour (EVDFC). This value is defined on the basis of a person's subjective evaluation. By applying this value, the cause that generates DFC can be identified. On the basis of these studies, a new method for reducing DFC by applying frame‐rate control (FRC) with suppression of the side effect is proposed. This improved method can be used to provide high‐quality images.