Simultaneous enhancement of the efficiency and stability of organic solar cells using PEDOT:PSS grafted with a PEGME buffer layer

We report a simple processing method to simultaneously improve the efficiency and stability of organic solar cells (OSCs). Poly(4-styrene sulfonate)-doped poly(3,4-ethylenedioxy-thiophene (PEDOT:PSS), widely used as hole transport layer (HTL) in OSCs, tends to accelerate the degradation of devices because of its hygroscopic and acidic properties. In this regard, we have modified PEDOT:PSS to reduce its hygroscopic and acidic properties through a condensation reaction between PEDOT:PSS and poly(ethylene glycol) methyl ether (PEGME) in order to improve the efficiency and stability of OSCs. As a result, the power conversion efficiency (PCE) increased by 21%, from 2.57% up to 3.11%. A better energy level alignment by the reduced work function of the modified PEDOT:PSS with a highest occupied molecular orbital (HOMO) level of poly(3-hexylthiophene-2,5-diyl) (P3HT) is considered the origin of the improved the efficiency. The half-life of OSCs with PEDOT:PSS modified with PEGME buffer layer also increased up to 3.5 times compared to that of devices with pristine PEDOT:PSS buffer layer.     

Optical properties and conductivity of PEDOT:PSS films treated by polyethylenimine solution for organic solar cells

We report on conductivity and optical property of three different types of poly(3,4-ethylenedioxythiophene):polystyrene sulfonate (PEDOT:PSS) films [pristine PH1000 film (PH1000-p), with 5 wt.% ethylene glycol additive (PH1000-EG) and with sulfuric acid post-treatment (PH1000-SA)] before and after polyethylenimine (PEI) treatment. The PEI is found to decrease the conductivity of all the PEDOT:PSS films. The processing solvent of 2-methoxyethanol is found to significantly enhance the conductivity of PH1000-p from 1.1 up to 744 S/cm while the processing solvent of isopropanol or water does not change the conductivity of PH1000-p much. As for the optical properties, the PEI treatment slightly changes the transmittance and reflectance of PH1000-p and PH1000-EG films, while the PEI leads to an substantial increase of the absorptance in the spectral region of 400–1100 nm of the PH1000-SA films. Though the optical property and conductivity of the three different types of PEDOT:PSS films vary with the PEI treatment, the treated PEDOT:PSS films exhibit similar low work function. We demonstrate solar cells with a simple device structure of glass/low-WF PEDOT:PSS/P3HT:ICBA/high-WF PEDOT:PSS cells that exhibit good performance with open-circuit voltage of 0.82 V and fill factor up to 0.62 under 100 mW/cm² white light illumination.     

Tuning fuzzy power-system stabilizers in multi-machine systems by global optimization algorithms based on efficient domain partitions

In this paper, the problem of global tuning of fuzzy power-system stabilizers (FPSSs) present in a multi-machine power system in order to damp the power system oscillations is considered. In particular, it is formulated as a problem of global minimization of a multiextremal black-box function over a multidimensional hyperinterval. A global optimization technique, recently proposed, is used for solving the stated problem: the search hyperinterval is partitioned into smaller hyperintervals and the objective function is evaluated only at two vertices corresponding to the main diagonal of the generated hyperintervals, thus avoiding unnecessary ponderous simulations. Then, the performances of this technique are numerically compared with ones of a genetic algorithm (GA).     

发电机组低励限制的功能特点及试验

分析低励限制的应用目标和功能特点,在此基础上,提出低励试验目的和内容,为正确发挥低励限制功能及并网预防事故发生提供参考。     

导电高分子PEDOT／PSS保护银纳米颗粒的制备与表征

利用导电高分子聚（3，4-二氧乙基噻吩）／聚（对苯乙烯磺酸）（PEDOT／PSS）作保护剂，制备了银纳米颗粒，用UV-Vis和TEM对其进行了表征．结果表明，选择合适量的PEDOT／PSS保护剂可以得到大小分布较窄银纳米颗粒．     

基于PSO算法的电力系统稳定器参数优化

针对电力系统稳定器的参数优化问题,提出一种基于微粒群优化算法的整定方法。算法选择Δω作为输入信号,以ITAE指标作为微粒群优化算法的目标函数,对电力系统稳定器增益Ki和时间常数T1i、T3i三个参数进行优化设计。仿真结果验证了算法的有效性和优越性。     

互联电力系统未知机理低频振荡分析

近年来,我国互联电力系统多次发生低频振荡。针对南方互联电网"5.13"功率振荡,首先采用特征值分析法详细分析南方互联电网低频振荡特性,得出主要振荡模式以及发电机组参与因子和模态分布图。其次利用仿真软件PSS/E,对强相关机组的切机、三相短路故障以及原动机周期扰动分别进行时域仿真,并与实际振荡曲线进行对比。结果表明,南方电网此次功率振荡不是因为强相关机组电气侧故障,采用负阻尼机理也不能很好地解释,其产生原因可能是发电机组受原动机周期扰动有关。     

简单电力系统静态稳定性分析及研究

文章以一个单机-无穷大系统为例,分析了影响电力系统静态稳定性的因素,介绍了静态稳定性的分析方法,提出了提高电力系统静态稳定性的措施。通过采取改善电力系统基本元件的特性和参数及采用附加装置等措施,提高了电力系统的静态稳定性。     

A Self-Assembled Vertical-Gradient and Well-Dispersed MXene Structure for Flexible Large-Area Perovskite Modules

Advancing hole transport layers (HTL) to realize large-area, flexible, and high-performance perovskite solar cells (PSCs) is one of the most challenging issues for its commercialization. Here, a self-assembled gradient Ti₃C₂T_x MXene incorporated PEDOT:PSS HTL is demonstrated to achieve high-performance large-area PSCs by establishing half-caramelization-based glucose-induced MXene redistribution. Through this process, the Ti₃C₂T_x MXene nanosheets are spontaneously dispersed and redistributed at the top region of HTL to form the unique gradient distribution structure composed of MXene:Glucose:PEDOT:PSS (MG-PEDOT). These results show that the MG-PEDOT HTL not only offers favorable energy level alignment and efficient charge extraction, but also improves the film quality of perovskite layer featuring enlarged grain size, lower trap density, and longer carrier lifetime. Consequently, the power conversion efficiency (PCE) of the flexible device based on MG-PEDOT HTL is increased by 36% compared to that of pristine PEDOT:PSS HTL. Meanwhile, the flexible perovskite solar minimodule (15 cm² area) using MG-PEDOT HTL achieve a PCE of 17.06%. The encapsulated modules show remarkable long-term storage stability at 85 °C in ambient air (≈90% efficiency retention after 1200 h) and enhanced operational lifetime (≈90% efficiency retention after 200 h). This new approach shows a promising future of the self-assembled HTLs for developing optoelectronic devices.