Influences of Ga concentration on performances of CuInGaSe2 cells fabricated by sputtering-based method with ceramic quaternary target

Copper Indium Gallium Selenide (Cu(In,Ga)Se₂, CIGSe) absorbers with different Ga contents were prepared by sputtering CIGSe ceramic targets and post-annealing. CIGSe solar cell devices were fabricated with other functional layers. The device performances and absorber properties were investigated. Increasing Ga content led to an increase in V_OC and a decrease in J_SC. Ga was supposed to diffuse towards back contact during the annealing process. The best performance was obtained as the ratio of Ga/(In + Ga) reaches 0.32 with the efficiency of 13.8% and a V_OC of 537 mV.     

Improvement of the deflocculating power of polyacrylates in ceramic slips by small additions of quaternary ammonium salts

In this work, we examine the effect of small additions of cationic quaternary ammonium salts (QAS) of different molecular weight on the rheology of an industrial ceramic suspension deflocculated with sodium polyacrylate and sodium metasilicate. The observed shear thinning behaviors obey the typical power law of fluid rheology. In order to characterize the rheological behavior of these slurries, three new parameters are introduced: a low shear rate consistency index and two transient viscosities, distant from the equilibrium, after increasing and decreasing the shear rates. These parameters vary with polyacrylate molecular weight and on additions of small quantities of QAS, which we found to be useful for decreasing the slurry viscosity.     

Chirality-antimicrobial relationship of quaternary ammonium cationics

Optically active and racemic quaternary ammonium cationics containing a chiral alkyl group, such as N,N-dimethyl-N-(1-phenylethyl)alkylammonium bromides were prepared and showed excellent antimicrobial properties against Gram positive and negative bacteria, with some exceptions, and against fungi. The influence of optical isomerism on their antimicrobial properties showed that the antimicrobial properties between racemic and optically active cationics were obscure. The order of activity of substituted alkyl groups was tetradecyl > dodecyl ° hexadecyl.     

应用烃类直接检测技术预测天然气藏

柴达木盆地位于青藏高原北部，是中国大型含油气盆地之一，历经４０年的勘探，发现了丰富的油气资源。柴达木盆地东部地区是第四纪沉降与沉积中心，区内第二系生储气岩厚度大、分布广、第四纪新构造运动形成的同生沉积构造发育、保存完整、具有形成大中型天然气田的地质条件。此外，由于该地区含气地层时代新、埋藏浅、成岩与胶结作用差、含气层厚度大、孔渗性好，加之构造条件简单，人文干扰小、是应用烃直接检测技术寻找天然气的有     

Superconductivity in a new quaternary phase with HgSm0.5In0.5Pb2 composition

This work reports a systematic study on the structural and superconducting properties in the Hg-Sm-In-Pb system. It is investigated how In and Sm dopings influence the superconducting properties of the HgPb₂ phase which was recently reported. Results for the HgSm_1 − xPb₂ system show that Sm atoms substitute Hg vacancies in the tetragonal phase which do not affect the onset critical temperature of the HgPb₂ compound. Simultaneous Sm and In doping effects on the properties of the HgPb₂ phase are also studied. Experimental and simulations of X-ray powder diffractograms suggest that the HgSm_1 − xIn_xPb₂ system (0.2 ≤ x ≤ 0.7) has a pseudo-cubic structure with lattice parameters near 4.88 Å. Superconducting properties measurements show that this system has an optimum doping at x ∼ 0.5 with the onset critical temperature close to 6.9 K. This is the highest superconducting critical temperature for the AuCu prototype so far reported.     

季胺萃取锌的动力学研究

以恒界面池法研究了氯化物介质中季胺萃锌的动力学。考查了搅拌转速、传质界面积和温度对萃取速率的影响，判定季爱萃锌为界面化学反应的动力学模式。进一步研究了季胺萃取剂浓度和水相Ｚｎ＾２＋浓度对萃取速率的影响，得到了与理论推断相吻合的速率方程。     

Liquid-liquid equilibrium for the quaternary system of o-xylene(1)+water(2) +propionic acid(3)+1-butanol(4) at 298.15 K and atmospheric pressure

The liquid-liquid equilibrium for the quaternary system of o-xylene(1)+water(2)+propionic acid(3)+1-butanol(4) was measured at 298.15 K and atmospheric pressure. Binodal curves, tie-lines, a distribution curve, and a selectivity curve for the quaternary system have been determined in order to investigate the effect of binary solvents, oxylene and 1-butanol, on extracting propionic acid from aqueous solution. In addition, these experimental tie line data were also compared with the values predicted by the UNIFAC model. In this study, the UNIFAC model was capable of predicting the compositions of this quaternary system within an average RMSD of 1.13 mol%. This paper was prepared at the 2004 Korea/Japan/Taiwan Chemical Engineering Conference held at Busan, Korea between November 3 and 4, 2004.     

壳聚糖季铵盐的合成及其对鞣酸的絮凝性能

通过引入季铵盐基团的方法对壳聚糖进行改性得到完全溶于水的壳聚糖季铵盐,IR谱图表明取代反应主要发生在壳聚糖的氨基上。以中药药液中的主要杂质之一鞣酸为对象进行了絮凝试验,结果显示其鞣酸去除率,明显高于壳聚糖。同时壳聚糖季铵盐絮凝剂投加量适用范围更宽,有利于实际使用。     

Polymer electrolytes from PEO and novel quaternary ammonium iodides for dye-sensitized solar cells

Polymer electrolytes were prepared by blending high molecular weight poly(ethylene oxide) (PEO) and a series of novel quaternary ammonium iodides, the polysiloxanes with oligo(oxyethylene) side chains and quaternary ammonium groups. X-ray diffraction (XRD) measurements ensured relatively low crystallinity when the quaternary ammonium iodides were incorporated into the PEO host. The ionic conductivity of these complexes was improved with the addition of plasticizers. The improvement in the ionic conductivity was determined by the polarity, viscosity and amounts of plasticizers. A plasticized electrolyte containing the novel quaternary ammonium iodide was successfully used in fabricating a quasi-solid-state dye-sensitized solar cell for the first time. The fill factor and energy conversion efficiency of the cell were calculated to be 0.68 and 1.39%, respectively.     

Thermal analysis of montmorillonites modified with quaternary phosphonium and ammonium surfactants

The thermal stability of seven organically modified montmorillonites (‘organoclays’) has been investigated using differential thermal analysis, differential scanning calorimetry, and thermogravimetry in conjunction with X-ray diffractometry. Six organoclays were synthesised by replacing the interlayer inorganic cations, initially present, with quaternary phosphonium and ammonium surfactant cations. The samples modified with tetrabutylphosphonium (TBP), and butyltriphenylphosphonium (BTPP) ions have an appreciably higher thermal stability than the octadecyltrimethylammonium (ODTMA)-modified clays. Thus, in the case of TBP- and BTPP-modified montmorillonites, the onset temperature of decomposition is close to 300 °C. Samples modified with hexadecyltributylphosphonium (HDTBP) ions have a lower onset temperature of decomposition of 225 °C. In comparison, the onset temperature for ODTMA-montmorillonites (obtained at different concentrations of ODTMA-bromide) ranges from 158 to 222 °C, being highest where the concentration of intercalated surfactant is lowest. The onset temperature for a commercial alkylsilane-treated quaternary ammonium-modified organoclay (S-BEN N-400FP) is 207 °C. The basal spacing of the TBP- and BTPP-modified clays is 1.7–1.8 nm, indicating a monolayer arrangement of quaternary phosphonium ions in the interlayer space, while the value of 2.5 nm for HDTBP-montmorillonite indicates a more open structure. The ODTMA-modified samples have basal spacings ranging from 1.9 to 2.1 nm, indicative of a bilayer to pseudo-trilayer arrangement. The exceptionally high basal spacing of 3.4 nm for the S-BEN N-400FP organoclay might be due to interlayer penetration of organosilane hydrolysis products during synthesis. The thermal properties of organoclays are apparently related to the nature of the surfactants and their arrangement in the interlayer space of montmorillonite.