Characterization of Austempered Ductile Iron Through Barkhausen Noise Measurements

The outstanding mechanical properties of austempered ductile irons (ADI) are linked to the microstructure of the matrix obtained by subjecting a ductile iron with an appropriate composition to a heat treatment called austempering. Then the microstructure of the matrix consists of bainitic ferrite with different volume fractions of retained austenite. The aim of this work is to use the magnetic Barkhausen noise (MBN) as a nondestructive method for characterizing the microstructure of ADI. First, it is shown that the amplitude and position of the peak-shaped MBN response is quite sensitive to the microstructure of the matrix of ductile irons. Thus each type of constituent (equiaxial ferrite, pearlite, martensite or bainite) exhibits a typical response and, in turn, it can be identified from the MBN response. Furthermore, a good correlation is found between MBN signal parameters and ADI heat treatment parameters, indicating that MBN is also quite sensitive to fine evolutions of the microstructure of ADI. MBN peak position is especially sensitive to the type of bainite, whereas peak amplitude is linked to the progress of the bainite reaction. Hence MBN measurements appear to be a powerful tool to assess some important microstructural features of ADI castings.     

一种基于PWM的半桥型开关电源

主要介绍了由SG3525组成的半桥型开关稳压电路的结构和工作原理，阐述了PWN集成电路SG3525的特性和主要功能。实践表明：该系统工作稳定，运行效果良好。     

PWR核电站蒸汽发生器停堆湿保养工况联氨的缓蚀作用

一、引言压水堆(PWR)核电站蒸汽发生器(SG)管材因二回路系统腐蚀产物积累发生应力腐蚀开裂,这是SG传热管破损的主要原因之一。维修和更换SG使PWR停运期间所需要的替用电力对发电站造成很大的财政负担,同时,二回路系统的腐蚀产物沉积在蒸汽发生器内,降低     

WCp增强球铁基复合材料模具的制备及其磨损性能

针对耐火砖模具的工矿特点,将复合材料设计原理和铸造技术相结合,采用复合剂技术,在普通砂型条件下制备了WCp增强球墨铸铁基表层复合材料模具,并对其三体磨粒磨损性能进行了研究.结果表明,合适的球墨铸铁基体材料的主要成分w为3.7%C、2.1%Si、1.0%Cu和0.3%Mn;铸件表面平整,复合层厚度均匀,可达7～9 mm,复合组织的硬度达到HRC 62以上;复合材料相对于基体材料的耐磨性提高到8以上.     

SG186营销信息系统电费管理业务应用及常见问题解析

随着SG186营销业务应用系统的深化应用,业务人员需将业务与操作应用紧密结合,不断提高应用水平,电费管理业务模块在应用过程中出现了各种各样的故障问题,文章对电费管理业务的一些常见问题进行了分析说明,并提出了相应的处理方法。同时对SG186营销业务应用系统非政策性退补流程和用户档案计费信息参数的应用做了介绍。     

SG变质处理对高锰钢铸态及热处理组织的影响

SG变质处理能有效地抑制铸态组织中柱状晶的生长,细化奥氏体组织并降低其方向性,减少晶间碳化物数量并使之细化;对热处理组织,SG变质处理可以加速碳化物溶解,缩短水韧处理的保温时间或降低水韧处理的温度。SG的这些变质作用对高碳及合金化类型的高锰钢尤为显得有实际意义。     

36V/2A数控开关稳压电源设计

本文设计的开关稳压电源系统采用基于KA3525PWM控制芯片的推挽式功率变换器,实现了28V-38V连续可调的直流稳定输出电压,并通过凌阳SPCE061A精简开发板实现了电压的步进值为1的调整和输出电压的LCD显示。经测试,系统各项技术指标均达到设计要求。     

福建电力“SG186”工程一体化平台的设计与开发

本文在简述福建电力现状的基础上,根据国家电网“SG186”工程的部署,首先分析了福建电力一体化平台的建设需求,并对平台的技术方案和应用技术进行了探讨,最后对系统集成、功能实现及安全性访问作了进一步的研究。一体化平台的构建有效提高了企业的工作效率和整体素质,实现了管理的现代化。     

一种基于PSIM的脉宽调制芯片SG3525的建模与仿真

SG3525是一种应用非常广泛的脉宽调制芯片,在开关电源设计中得到了非常广泛的应用。本文以其为研究对象,对其功能详细研究,并根据资料手册在PSIM中对其各个模块进行建模。最后,将所搭建的各个模块相结合并利用PSIM现有的模块封装功能将其封装起来,用于控制一个全桥DC—DC变换,并通过仿真来验证其功能。     

Global existence and nonexistence for degenerate parabolic equations with nonlinear boundary flux

In this paper, by constructing various kinds of sub- and super-solutions and using the basic properties of M-matrix, we give the necessary and sufficient conditions of global existence for nonnegative solutions to a degenerate parabolic system with completely coupled boundary conditions, which generalize the recent results of, for instance, Cui [Z. Cui, Critical curves of the non-Newtonian polytropic filtration equations coupled with nonlinear boundary conditions, Nonlinear Anal. 68 (2008) 3201–3208], Zhou–Mu [J. Zhou, C. Mu, Algebraic criteria for global existence or blow-up for a boundary coupled system of nonlinear diffusion equations, Appl. Anal. 86 (2007) 1185–1197] etc.