应用于ROHC的窗基LSB编解码修正算法实现机制

在移动：IPv6中，常常因为数据分组的头标太大而消耗过多的带宽，因而需要使用灵活可靠的鲁棒性头标压缩机制(ROHC)来对分组头标进行压缩。在ROHC中，使用LSB编码方案对分组中那些变化比较小的头标域进行编码。本文将在简要介绍ROHC原理的基础上，深入探讨应用于ROHC的窗基LSB编解码修正算法的实现机制。     

SN388地震仪道间感应分析及排除方法

通过分析SN388地震仪所得的地震记录，发现炮点的能量越强，炮点附近的地震道感应越大。通过实验得出结论，炮点附近的感应是由道间串音引起的，采取适当措施就可解决这种问题。     

基于嵌入式Linux系统的键盘驱动设计

摘要：为了适应嵌入式设备外设的多样性,本文以特殊矩阵键盘为例,设计了一套完整的驱动控制模块。硬件电路设计采用外扩3片SN74HCl64芯片的方式,节省了GPIO引脚的使用,大大提高了利用效率。同时,在此基础上引出了Linux内核中input子系统的特性和工作机制,呈现了较为完整的输入事件由内核空间传递到用户空间进程的过程。实验结果表明,设计的驱动模块具有良好的实时性和准确性。     

热泵热水器控制器的设计

介绍了热泵热水系统的工作原理。详细阐述了以松翰公司的SN8P2308微控制器为核心的热泵控制器硬件系统的设计。结合热泵热水器的控制要求,采用模块化、层次化的软件设计方法,实现了多路温度数据的采集和热泵在各种系统参数下运行的控制。     

Distinguishing attacks on stream ciphers based on arrays of pseudo-random words

In numerous modern stream ciphers, the internal state consists of a large array of pseudo-random words, while the output key-stream is a relatively simple function of the state. It has been heuristically shown in several situations [3], [8], [9], [10], [11] and [14] that this structure may lead to distinguishing attacks on the cipher. In this note we present a more rigorous treatment of this structural attack. First, we present a rigorous proof of the main probabilistic claim behind it in the basic cases. We then apply it concretely to the cipher sn3 [12], and demonstrate that the heuristic assumptions of the attack are remarkably precise in more complicated cases.     

支持B类CPU卡的5V接触式读写器设计

针对A类接口的读写器不能对B类CPU卡进行读写的问题,介绍一种可以对3V的B类卡片进行读写的5V接触式IC卡读写器,阐述了其硬件电路结构和单片机固件程序,介绍了对其进行操作的简单上位机软件。实验结果表明,该读写器结构简单、性能稳定,对研制可同时操作3V/5V卡片的AB类接口设备有指导意义。     

Optimization of screen-printing parameters of SN9000 ink for pinholes using Taguchi method in chip on film packaging

The influence of pinholes on the chip on film (COF) in screen-printing was studied in this paper. Yield improvement is the most challenging part of COF manufacturing in view of its processing complexity, mainly in the screen-printing process. The process parameters such as ink capacity, origin control distance, angle of the squeezer, method of mixing, freshness of ink, speed of printing, and speed of scraper are considered to improve the pinholes. In Taguchi method, a two level orthogonal array is used to determine the signal-to-noise (S/N) ratio. Analysis of variance and the F-test values are used to determine the most significant process parameters affecting the pinholes. Confirmation analysis tests with the optimal levels of process parameters are carried out. The results of the experiment show that Taguchi method is a very suitable approach with regard to solving quality problems related to such pinholes.     

A Face Identification System Based on the Mahalanobis–Taguchi System

In this paper, we propose a face identification system based on the Mahalanobis–Taguchi System (MTS). The MTS is one of the pattern recognition methods frequently used in quality engineering, and can perform robust pattern recognition by using training data, including noise. It is likely that this advantage will allow the effective implementation of a robust face identification system against lighting and face position fluctuations. Moreover, the MTS can optimize the number of attributes required for identification by using the orthogonal array and the signal/noise (SN) ratio. The face identification system has to deal with many users and the amount of data in a facial image is large. Therefore, the time required for identification can be decreased and the amount of data in the facial image database can be reduced by performing the optimization. We confirmed the effectiveness of the proposed system through practical experiments. The experimental results revealed that the MTS was an effective method for robust face identification, and could effectively reduce the number of attributes required for identification.     

Aliphatic 18F-Radiofluorination: Recent Advances in the Labeling of Base-Sensitive Substrates**

Aliphatic fluorine-18 radiolabeling is the most commonly used method to synthesize tracers for PET-imaging. With an increasing demand for ¹⁸F-radiotracers for clinical applications, new labeling strategies aiming to increase radiochemical yields of established tracers or, more importantly, to enable ¹⁸F-labeling of new scaffolds have been developed. In recent years, increased attention has been focused on the direct aliphatic ¹⁸F-fluorination of base-sensitive substrates in this respect. This minireview gives a concise overview of the recent advances within this field and aims to highlight the advantages and limitations of these methods.     

煤基SN级5W-30汽油机油行车试验研究

行车试验是全面评价汽油机油（润滑油）性能的重要方法。分别对自研煤基5W-30汽油机油和市售SN 5W-30汽油机油进行10 000 km行车试验研究，依据国家标准GB/T 8028—2010《汽油机油换油指标》对不同行驶里程下的旧油进行理化性能分析。结果表明：10 000 km行车试验后，2种汽油机油性能指标均未超过换油指标要求，仍有较大性能余量；相比市售SN 5W-30汽油机，自研煤基汽油机油行车试验后铁含量和酸值增加更小，碱值余量更大，表现出更优异的润滑性能、抗氧化性能、抗磨损性能和清洁分散性能。