我国核工业废放射源安全管理

废放射源易于在管理上失去控制，从而酿成事故，对人类和环境造成危害。本文分析了我国废放射源产生的原因，介绍了我国核工业废放射源的现状与安全管理的技术路线和策略，提出了当前所面临的主要问题。     

Seismic safety of lifelines—an optimum design method

Lifeline systems are vulnerable to two types of hazards arising from potential earthquake sources. These are the hazard of a fault-rupture strike on elements of a lifeline system and the hazard of overstress induced in different elements of the system because of the ground vibration. An optimum design method is presented in this paper for the design of a lifeline system for a maximum accepted probability of failure because of any of the two modes of failure. The method may be used to determine an optimum path between a number of fixed points which represent supply or demand stations in the system.     

Dynamical sources in information theory: Fundamental intervals and word prefixes

A quite general model of source that comes from dynamical systems theory is introduced. Within this model, some basic problems of algorithmic information theory contexts are analysed. The main tool is a new object, the generalized Ruelle operator, which can be viewed as a “generating” operator for fundamental intervals (associated to information sharing common prefixes). Its dominant spectral objects are linked with important parameters of the source, such as the entropy, and play a central rôle in all the results.     

基于互素对称阵的近场源定位

针对近场源定位中存在的孔径损失问题,该文提出了一种新的近场源定位算法。该算法采用互素对称阵列,使得阵元间距不必限制于1/4信号波长。首先构造一个特殊的四阶累积量矩阵,进而采用MUSIC算法估计信源方位角,然后在每个估计方向上搜索距离。该算法将近场源2维定位问题转化为多次1维搜索,且参数自动配对。互素对称阵的使用有效地扩展了阵列孔径,提高了空间分辨概率和参数估计性能。计算机仿真验证了该算法的有效性。     

氟污染的危害及含氟废水处理技术研究进展

归纳了氟污染的来源,介绍了氟污染的危害,论述了含氟废水处理技术的研究进展,并分析了各种含氟废水处理方法存在的问题。最后指出新型功能材料、联合工艺及含氟废水资源化利用技术是今后含氟废水处理研究的重点方向。     

防止备自投装置动作过负荷方案的实践

根据南京地区电网的接线特点,分析了低压网络备用电源自投装置的动作所带来利弊,探讨出适合于本电网特点的防止备自投装置动作过负荷的技术方案。     

Factors controlling volatile organic compounds in dwellings in Melbourne,Australia

This study characterized indoor volatile organic compounds (VOCs) and investigated the effects of the dwelling characteristics, building materials, occupant activities, and environmental conditions on indoor VOC concentrations in 40 dwellings located in Melbourne, Australia, in 2008 and 2009. A total of 97 VOCs were identified. Nine VOCs, n‐butane, 2‐methylbutane, toluene, formaldehyde, acetaldehyde, d‐limonene, ethanol, 2‐propanol, and acetic acid, accounted for 68% of the sum of all VOCs. The median indoor concentrations of all VOCs were greater than those measured outdoors. The occupant density was positively associated with indoor VOC concentrations via occupant activities, including respiration and combustion. Terpenes were associated with the use of household cleaning and laundry products. A petroleum‐like indoor VOC signature of alkanes and aromatics was associated with the proximity of major roads. The indoor VOC concentrations were negatively correlated (P < 0.05) with ventilation. Levels of VOCs in these Australian dwellings were lower than those from previous studies in North America and Europe, probably due to a combination of an ongoing temporal decrease in indoor VOC concentrations and the leakier nature of Australian dwellings.     

Ways to open innovation: Main agents and sources in the Portuguese case

Facing increasing open innovation trends, Portuguese enterprises are considering the related processes and impacts. Thus, this work aims to identify the sectors whose enterprises most engage in open innovation (such as cooperation on this issue) and which sources/agents are most used. This is analyzed by sector and type of innovation as an interesting way of differentiation for better open innovation strategy delineation. Using the data from the Community Innovation Survey (CIS-2012), it first appraises the nature of the innovation process, either cooperative or firm-based, as the starting level of analysis. Then, it differentiates the results by sector illustrating which cooperation sources/agents are most used (scope) and relative intensity of use (scale). This is important to assess levels of openness and related factors. Results show that main innovating sectors in Portugal are of three types: research-based, knowledge-based and service-based. They reveal an increasing focus on knowledge and services, trends that have been leading to more active openness towards innovation. For instance, health and construction are increasing their openness for innovating and internationalizing processes. However, Portuguese innovation is still more firm-based (in-house) than cooperation-based, especially concerning new products' launching. This work and future analyzes around it can contribute to encourage the open innovation strategy in more sectors of the economy as an easy and effective way to cope with rapid trends and changes.     

The 2013 reforms of the Flemish renewable electricity support: Missed opportunities

The Flemish renewable electricity support system has struggled to address a number of problematic issues in the past. These included excessive profit margins and general malfunctioning of the green certificate market, as well as a lack of qualification of various existing renewable energy technologies. The Flemish government responded to these issues by introducing major reforms in 2013, including “banding” to differentiate the support for various technologies. However, reliable methods for differentiating renewable electricity technologies and calculating support levels have not been sufficiently developed. The main objective of the 2013 reforms was to reduce support costs, but application of German feed-in tariffs on 18 reference technologies has shown that most projects in Flanders continue to receive high levels of support. The 2013 reforms did not succeed in addressing malfunctioning of the green certificate market. On the contrary, the confidence of investors in renewable electricity plants has decreased as the terms of support can be altered retroactively by adjusting remuneration levels and through political interventions. Future adaptations are likely to be made which will further decrease the overall stability and effectiveness of the system.     

钻孔处置简介

介绍了钻孔处置概念及3个国家的钻孔处置设施。对于废放射源和少量放射性废物,钻孔处置将是一个安全、经济和有效的最终处置方案。