Experimental research on combined effect of obstacle and local spraying water fog on hydrogen/air premixed explosion

In order to reveal the mechanism of water fog explosion suppression and research the combined effect of water fog and obstacle on hydrogen/air deflagration, multiple sets of experiments were set up. The results show that the instability of thermal diffusion under lean combustion conditions is the main influencing factor of hydrogen/air flame surface instability, and the existence of water fog will aggravate the hydrogen/air flame surface instability. When obstacle is not considered, 8 μm, 15 μm, 30 μm water fog can significantly reduce the flame velocity and explosion overpressure of hydrogen/air, 45 μm fine water fog plays the opposite role. When considering the relative position of the water fog release position and the obstacle, the 8 μm, 15 μm, 30 μm water fog has almost no suppression effect when released near the obstacle, but a significant suppression effect occur, when using the 45 μm water fog. In the field of theoretical research, the research results not only provide an experimental basis for the fine water fog to reduce the consequences of hydrogen explosion accidents, and the optimal diameter range used by the water fog, but also provide experimental reference for the numerical simulation of hydrogen/air explosion suppression in semi-open space, and promote the development of hydrogen explosion suppression theory. In terms of engineering applications, this study can provide a theoretical basis for the layout of fire fighting equipment in the engine room of nuclear power plants or hydrogen-powered ships.     

DVD视盘机的电磁骚扰抑制

本文讨论对DVD视盘机的电磁骚扰的抑制，使其电磁骚扰水平符合有关标准的要求，不成为新的电磁环境中的污染源。     

单麦克风和双麦克风语音增强系统的研究

本文对采用减谱法和箱关法的语音增强系统进行了研究，系统的噪声为白噪声和普通机房噪声。减谱法采用单麦克风输入，试验中发现语音的分帧方法对消噪影响很大，通过比较得到了一种具有明显消噪效果的分帧方法，在相关法中采用双麦克风输入，对两个输入信号之间的时延差进行了补偿，在求维纳滤波器系数时，对信号谱进行统计平均，从而使消噪后的语音信号具有较好的自然度。在研究以上两种方法的基础上，我们提出了一种混合消噪系统，     

对流扩散方程的离散技术及数值实验

本文研究了对流扩散方程的离散技术,并进行了大量数值实验。研究表明,scharfetter—Gummel的广义形式可以良好地消除内部的非物理振荡,且对边界层生成振荡的传播有抑制作用,但不能有效地消除边界层振荡。     

多用户干扰抑制超宽带正交脉冲序列设计

针对超宽带（U1tra—WideBand,UwB）多用户干扰问题,正交脉冲的产生是超宽带无线应用中关键技术。采用Rayleigh信号作为UWB基函数,使用Hermite矩阵特征向量分解方法,设计了UWB正交脉冲序列,从而达到抑制多用户干扰的目的。该方法产生的正交成形脉冲序列功率谱符合美国联邦通信委员会频谱规范,自相关性强,互相关性弱,利于多址检测。最后,分析了跳时脉位调制UwB系统的干扰抑制性能,仿真结果表明正交成形脉冲序列抗多用户干扰能力优于Gram—Schmidt过程得到的Seholtz正交脉冲序列。     

变频器应用中的可靠性设计

变频器在工业控制中对外界的干扰及抗外部干扰的问题日益引起人们的重视。介绍了变频器应用系统中十扰产乍的来源及其传播途径；分析了电磁干扰对电力电容器、电机和变压器等电力设备、电力系统、通信系统、电力测量、自动化设备和其他用户设备等的实际危害；由此提出了采用隔离、滤波、屏蔽和适当接地等抗干扰的实际解决方法。所阐述的系统设计和安装过程中抑制干扰的具体措施对变频器的正确、可靠使用有一定的实际意义。     

微机应用系统的EMI控制硬件设计

EMI(ElectromagneticInterference,电磁干扰)控制设计是EMC(ElectromagneticCompatibility,电磁兼容)设计的重要内容,是保证微机应用系统稳定、可靠运行的重要措施。文中在分析微机应用系统骚扰的传递途径与形成方式的前提下,从硬件设计的角度提出了一系列有效的抗骚扰措施来抑制系统中出现的各种骚扰。并就具体案例进行EMI分析与解决。     

A review of two-step sintering for ceramics

The development of high-density ceramic materials with fine-grained microstructures has been studied to considerably improve their properties for high-performance applications. Many alternatives have been searched to refine their microstructure by changing their composition and/or processing. Among such alternatives, the densification of ceramic materials by sintering curve control is an effective, simple and economical microstructure refinement method. Thus, different thermal treatment techniques such as spark plasma sintering and microstructural forms of control such as the control of sintering conditions have been used to obtain nanostructured materials. One of the techniques widely used in recent years is two-step sintering. Two-step sintering (TSS) is a promising method used to obtain high-density bodies and smaller grain sizes. Two TSS methodologies are known: sintering with thermal pretreatment at a low sintering temperature, followed by a second stage at elevated temperature, and the more recent approach presented by Chen and Wang, which has been the most widely used. In addition to the sintering conditions (temperature, heating rate and sintering holding times) that must be suitable for each composition type, the starting materials, particle size and processing method may influence the obtained microstructure, especially the reduced grain size and increased densification. The current review of two-step sintering presents the effect of this technique on the grain density and sizes of different ceramic materials. The influence of the addition of doping agents and its effect on the mechanical properties in different systems is also presented in the current study.     

A note on the Chen correlation of saturated flow boiling heat transfer

The Chen (Ind. Eng. Chem. Process Des. Dev., 1966, 5(3): 322–329) correlation of saturated flow boiling heat transfer is one of the most influential flow boiling heat transfer correlations. It adopted the additive concept and incorporated the Reynolds number factor F and the suppression factor S. Chen presented F and S as the best-fit curves without any parametric equation. However, the parametric equations of F and S were widely used in citing the Chen work, among which some were not accurate, and some had typos in the original sources and then used by others. The objective of this paper is to point out the incorrect and inaccurate equations in the literature. For this purpose, the existing expressions of F and S in the available literature are presented and compared with the Chen best-fit curves. The work provides a reference for the correct use of the Chen correlation.     

旋毛虫感染诱导的小鼠乳腺癌MCF-7细胞基因表达的变化

目的构建旋毛虫感染诱导的小鼠乳腺癌MCF-7细胞基因表达变化的cDNA消减文库,探讨旋毛虫感染诱导的MCF-7细胞基因表达的变化。方法复制MCF-7细胞小鼠模型,设对照组和旋毛虫感染组(实验组),采用抑制性消减杂交技术构建旋毛虫感染诱导的MCF-7细胞上调基因表达消减文库,并利用反向Northernblot技术对所获得基因的特异性表达进行验证。结果成功构建了旋毛虫感染诱导的MCF-7细胞上调基因表达消减文库,克隆的目的基因片段大小分布在200～500bp之间,20个阳性克隆的测序结果经BLAST比对,获得差异表达的已知功能基因8个和未知功能基因4个,这些基因在小鼠乳腺癌细胞中均有表达,而在肌肉组织中无表达。结论旋毛虫感染诱导的MCF-7细胞差异表达基因上调,其中RB基因可能与乳腺癌细胞的生长抑制密切相关,为在基因水平研究旋毛虫抗肿瘤机理奠定了基础。