Iterative equalization combining algorithm in intersymbol interference channel

To realize joint optimization of spatial diversity and equalization combining in the intersymbol interference (ISI) channel, an iterative equalization combining algorithm is proposed. The proposed algorithm uses the coefficients of Turbo equalization to calculate the combination weights without estimating the signal to noise ratio in each diversity branch. The equalized symbols from different diversity branches are combined, and the extrinsic information output from the decoder is fed back to the equalizers, so as to exchange soft information between the equalizers and the decoder. The performance of the proposed algorithm is analyzed using the extrinsic information transfer (EXIT) chart and verified by simulations. Results show that our approach fully exploits time domain information from the multipath channel and spatial domain information from multi receiving antennas, which efficiently improve the performance of the receiver in the severe ISI channel.     

Reducing the complexity of distance measurement methods for circular turbo codes that use structured interleavers

The knowledge of turbo code's minimum Hamming distance (d_min) and its corresponding codeword multiplicity (A_min) is of a great importance because the error correction capability of a code is strongly tied to the values of d_min and A_min. Unfortunately, the computational complexity associated with the search for d_min and A_min can be very high, especially for a turbo code that has high d_min value. This paper introduces some useful properties of turbo codes that use structured interleavers together with circular encoding. These properties allow for a significant reduction of search space and thus reduce significantly the computational complexity associated with the determination of d_min and A_min values. © 2014 The Authors. International Journal of Communication Systems published by John Wiley & Sons, Ltd.     

涡轮搅拌桨反应器混合过程的数值计算

利用CFD方法计算单层涡轮反应器搅拌槽内流体混合过程的速度场和浓度场,研究物料在搅拌槽内的混合过程,以及不同监测点对混合时间的影响。结果表明,搅拌槽内物料的混合主要受槽内流体的流动形式所影响;混合时间的长短与监测点位置有关;在搅拌桨的桨叶附近进行监测所得到的混合时间较短,在液面附近进行监测所得的混合时间较长。在实际生产和试验中,应注意对监测点位置的选取。     

无线通信中的空时分组码

空时分组码技术结合信道编码、调制和天线分集技术,当发送天线一定时,他的解码复杂度正比于发送速率,在3G标准中,该技术有着重要的地位。对空时分组码及相关知识进行了介绍,并对可变速率的空时分组码设计进行了探讨,最后展望了空时分组码技术的应用前景。     

Belief-Propagation-Approximated Decoding of Low-Density Parity-Check Codes

In this paper, we propose a new reduced-complexity decoding algorithm of Low-Density Parity-Check (LDPC) codes, called Belief-Propagation-Approximated (BPA) algorithm, which utilizes the idea of normalization and translates approximately the intricate nonlinear operation in the check nodes of the original BP algorithm to only one operation of looking up the table. The normalization factors can be obtained by simulation, or theoretically. Simulation results demonstrate that BPA algorithm exhibits fairly satisfactory bit error performance on the Additive White Gaussian Noise (AWGN) channel.     

低差错平底特性的非规则LDPC码的设计

介绍了非规则LDPC码的发展并给出了其优势及缺点，重点论述用ACE算法来构造非规则LDPC码从而降低其差错平底特性。对降低非规则LDPC码的差错平底特性的其它方法提出了展望。     

多载波CDMA系统中联合检测译码方法研究

为了提高多载波CDMA(MC-CDMA)系统的抗干扰能力与系统容量,提出了一种将信道参数检测与纠错码译码联合运算进行的方法,得到了一种反馈级联结构.在分析MC-CDMA系统接收性能时,通常假设信道参数能精确估计,但对于时变信道在实现上是困难的;根据本文提出的级联结构,先用导频符号进行信道参数估计,再用导频符号的译码信息作为导频符号进行信道参数的进一步优化,构成一种联合检测译码结构,能有效地降低导频符号数量,并提高了信道参数估计精度.通过仿真,与传统的方法进行了性能比较,联合检测译码方案能获得较大系统增益,是一种优化方案.     

The Minimum PAPR Code for OFDM Systems

In this letter, a block code that minimizes the peak‐to‐average power ratio (PAPR) of orthogonal frequency division multiplexing (OFDM) signals is proposed. It is shown that peak envelope power is invariant to cyclic shift and codeword inversion. The systematic encoding rule for the proposed code is composed of searching for a seed codeword, shifting the register elements, and determining codeword inversion. This eliminates the look‐up table for one‐to‐one correspondence between the source and the coded data. Computer simulation confirms that OFDM systems with the proposed code always have the minimum PAPR.     

一种改善Turbo乘积编码OFDM系统性能的新方法

本文提出一种利用对译码器软信息限幅来改善多径衰落信道中Turbo乘积编码OFDM(TPC-OFDM)系统性能的新方法。通过对不同多径衰落信道中QPSK映射和16QAM映射的TPC-OFDM系统性能的数值仿真，结果表明在10^-5误比特率下，这种新方法比传统的迭代译码大约有6～10dB的改进，对严重多径环境下TPC-OFDM系统的错误平底也有明显的改进。