Study of planar structure applying reciprocity technique combined with MGEC and analysis of discontinuity

The 3D structure electromagnetic computation presents several difficulties related to the volume mesh. In fact, the entire volume space must be taken into account even the smallest details. In this article, we propose a formulation based on the reciprocity theorem combined with the generalized equivalent circuit method to model a planar 3D structure with both coaxial and planar excitation. The major advantage of this formulation is the fact to reduce the computational volume into 2D ones in the discontinuity plane. In addition, we focused on the calculation of the discontinuity between the excitation source and the planar structure to determine the exact behavior of the electric coaxial excitation model. The obtained current density, electric field distributions, and the input impedance are presented and discussed in the following sections. An approximately good agreement of input impedance with those obtained by the simulator and measurement is shown.     

利用高频结构仿真器分析波导魔T

高频结构仿真器（HFSS）是一种微波器件设计软件，该软件界面友好，通过仿真计算减小了调试工作量，使得微波器件的设计变得简单易行。本文利用HFSS对波导魔T进行了仿真分析，得到了该器件的S参数和动、静态场的分布情况，并对该器件进行了优化设计。     

具有透明波导的量子阱半导体激光器及其光集成技术

本文论述了具有透明波导结构的量子阱半导体激光器及其光集成技术的其本原理及主要优点。尤其在实现高功率窄光束输出的光集成器件方面更显出其独特的优点。     

矩形介质波导阵列的一种新型分析方法

本文将等效介电常数近似分析方法在应用范围和处理方法上进行了一些改进．发展为双等效介电常数近似分析法，然后用它来分析矩形介质波导阵列．推得两个一维周期的耦合特征方程。如果将Macatili方法应用范围扩展用来研究该波导阵列也会得到同样的结果，它们都能在二维平面上较准确地反应出通带和阻带等主要周期特性。     

An anti-plane crack perpendicular to the weak/micro-discontinuous interface in a bi-FGM structure with exponential and linear non-homogeneities

Treated was an anti-plane crack perpendicular to the interface of an exponential-type FGM strip bonded to another linear-type FGM substrate with infinite thickness. Through Fourier integral transform, the problem was reduced as a Cauchy singular integral equation, which was further solved numerically by the Lobatto–Chebyshev collocation method. Based on the numerical solution, the effects of the geometrical and physical parameters on the stress intensity factor (SIF) were analyzed and the following conclusions were obtained: (a) A notable discrepancy between the interface-perpendicular crack and the interfacial one is that, to reduce the weak-discontinuity of interface or to make the interface micro-discontinuous will not necessarily decrease the SIF of the former, but will surely decrease that of the latter. (b) When a crack tip is situated very near to the interface (or free surface), its SIF will be high and totally dominated by the interface (or free surface). (c) To increase the stiffness of the FGM on one side of the interface is beneficial to preventing the crack on the other side from growing toward the interface. Besides, some practical suggestions were further given for material design in the field of composites.     

Performance characteristics of a therapeutic ultrasound wire waveguide apparatus

Therapeutic ultrasound angioplasty has been investigated, clinically, by a number of researchers and represents a potentially promising therapy for the treatment of atherosclerotic lesions. To date, there has been no detailed analysis of the effect of mechanical design parameters, such as wire geometry or damping characteristics, on wire waveguide performance. An apparatus capable of delivering therapeutic ultrasound down small diameter nickel–titanium (NiTi) wire waveguides is described. The output peak-to-peak (p–p) displacements at the distal tip of a 1.0 mm diameter waveguide were measured experimentally, by means of an optical microscope and image analysis software. The output was measured for a range of waveguide lengths from 118 to 303 mm. Wire waveguide distal tip displacements as high as 98 μm (p–p) at 23.5 kHz were measured. For the range of lengths tested, the experimental measurements show the critical relationship between the length of the waveguide and the output distal tip displacements. A finite element model that can predict the resonant frequencies and distal tip displacements of various wire waveguide geometries and configurations, including the effect of damping, is presented. This numerical model has been validated against the experimental displacement data obtained. This will be a valuable design tool for ensuring the safety and effectiveness of therapeutic ultrasound angioplasty procedures.     

轴对称正挤压的简化滑移线解

介绍了一种分析轴对称塑性成形问题的新方法———简化滑移线解法 ,并得到了光滑锥形凹模正挤压问题的简化滑移线解 ,求解所依据的近似应力场满足平衡微分方程和应力边界条件 ,并包含有应力间断面 ,但在某些局部范围内不满足屈服准则。结果表明 ,简化滑移线解高于滑移线解 ,低于上限解 ,比较接近于真实载荷 ,是求解轴对称塑性成形问题变形力的一种简便而实用的新方法     

Interaction of a shock pulse with a contact discontinuity

Passing of a triangular moderate-intensity pulse through a constant discontinuity is considered. Decay of the shock wave that passed into the second gas is analyzed. Damping of the detonation wave after burnout of the combustible mixture is discussed. __________ Translated from Fizika Goreniya i Vzryva, Vol. 43, No. 4, pp. 102–107, July–August, 2007.     

Discrete element approach for mine dump stability analysis

Mine overburden dumps have posed significant safety issues in the operations of various unit operations of open pit min-ing especially the external dumps. The external dumps are composed of a mixture of fragmented rocks and loose soil. Their charac-teristic is comparable to heavily discontinuous solid mass. The conventional approach of limit equilibrium methods provide safety factors for the slope but nothing about the stress-strain characteristics of the large dump mass. The designs of dump location and their respective geometry are integrated for the know-how of the stability characteristics of these dumps. The discrete element method uses a circular disk to represent the granular solid mass and their interactions are described by the Newton's third law of motion. The displacement is described by the sliding of the circular disk. This work is focused on the modeling efficiency of the discrete element methods to represent the behaviour of mine dump masses with the specified joint plane for the limit equilibrium method. The advantage of the work lies on the ease of information retrieval at any point at the dump mass concerning the stress and strain histories, displacement, failures etc. which when integrated produces a better understanding of the stability of the dump masses.     

基于系统上升时间预算的高速光传输系统设计与仿真

传统光传输系统设计多针对低速率传输系统,单一采用光功率分配预算即可满足系统设计要求。随着光传输速率和光通信容量的不断增加,高速光传输系统受色散影响严重,传统方法无法满足系统可靠性和有效性的要求,需要对系统色散进行补偿。针对系统大容量高速率的需求设计,采取DWDM光传输系统总体设计方案,提出了一种基于光功率分配、传输误码率、系统上升时间和线路色散预算的综合性能评价方法,分析了系统受各种因素的影响,通过系统参数优化选取与仿真设计,给出了系统仿真评估结果。