Elitist clonal selection algorithm for optimal choice of free knots in B-spline data fitting

Data fitting with B-splines is a challenging problem in reverse engineering for CAD/CAM, virtual reality, data visualization, and many other fields. It is well-known that the fitting improves greatly if knots are considered as free variables. This leads, however, to a very difficult multimodal and multivariate continuous nonlinear optimization problem, the so-called knot adjustment problem. In this context, the present paper introduces an adapted elitist clonal selection algorithm for automatic knot adjustment of B-spline curves. Given a set of noisy data points, our method determines the number and location of knots automatically in order to obtain an extremely accurate fitting of data. In addition, our method minimizes the number of parameters required for this task. Our approach performs very well and in a fully automatic way even for the cases of underlying functions requiring identical multiple knots, such as functions with discontinuities and cusps. To evaluate its performance, it has been applied to three challenging test functions, and results have been compared with those from other alternative methods based on AIS and genetic algorithms. Our experimental results show that our proposal outperforms previous approaches in terms of accuracy and flexibility. Some other issues such as the parameter tuning, the complexity of the algorithm, and the CPU runtime are also discussed.     

减少手术创伤始终是妇科肿瘤手术快速康复的决定性因素

减少手术创伤始终是快速康复的决定性因素,这一点在目前的加速康复外科研究尤其是复杂手术,如妇科肿瘤手术中尚未得到充分重视。尊重学习曲线、全面规划手术方案、总结失利经验、开展前瞻性研究是解决此问题的主要方案。本文着重讨论妇科肿瘤手术创伤对术后加速康复的影响及可能的改进措施。     

Wetting,infiltration and interaction behavior of CMAS towards columnar YSZ coatings deposited by plasma spray physical vapor

Thermal barrier coatings (TBCs) produced by electron beam physical vapor deposition (EB-PVD) or plasma spray (PS) usually suffer from molten calcium-magnesium-alumino-silicate (CMAS) attack. In this study, columnar structured YSZ coatings were fabricated by plasma spray physical vapor deposition (PS-PVD). The coatings were CMAS-infiltrated at 1250?°C for short terms (1, 5, 30?min). The wetting and spreading dynamics of CMAS melt on the coating surface was in-situ investigated using a heating microscope. The results indicate that the spreading evolution of CMAS melt can be described in terms of two stages with varied time intervals and spreading velocities. Besides, the PS-PVD columnar coating (～100?μm thick) was fully penetrated by CMAS melt within 1?min. After the CMAS attack for 30?min, the original feathered-YSZ grains (tetragonal phase) in both PS-PVD and EB-PVD coatings were replaced by globular shaped monoclinic ZrO₂ grains in the interaction regions.     

Residual learning rates in lead-acid batteries: Effects on emerging technologies

The low price of lead-acid, the most popular battery, is often used in setting cost targets for emerging energy storage technologies. Future cost reductions in lead acid batteries could increase investment and time scales needed for emerging storage technologies to reach cost-parity. In this paper the first documented model of cost reductions for lead-acid batteries is developed. Regression to a standard experience curve using 1989–2012 data yield a poor fit, with R² values of 0.17 for small batteries and 0.05 for larger systems. To address this problem, battery costs are separated into material and residual costs, and experience curves developed for residual costs. Depending on the year, residual costs account for 41–86% of total battery cost. Using running-time averages to address volatility in material costs, a 4-year time average experience curve for residual costs yield much higher R², 0.78 for small and 0.74 for large lead-acid batteries. The learning rate for residual costs in lead-acid batteries is 20%, a discovery with policy implications. Neglecting to consider cost reductions in lead-acid batteries could result in failure of energy storage start-ups and public policy programs. Generalizing this result, learning in incumbent technologies must be understood to assess the potential of emerging ones.     

皮带秤秤架的响应特性曲线分析

介绍了皮带秤秤架响应特性曲线分析方法，对四种结构形式的秤架进行了响应特性曲线分析和比较，得出的结论是：悬浮式秤架的计量特性最好。     

扬声器系统时域结构系数的仿真

从扬声器系统的等效类比线路出发,得出了阻抗特性Z(jω)的表达形式及其曲线。采用全面最小二乘法识别扬声器系统的时域函数的全套系数,从而测出扬声器系统的低频特性参数。以计算机仿真技术为基础,通过MATLAB和EWB软件进行系统模拟分析仿真,得到扬声器系统的阶跃响应、阻抗曲线等特性。     

一种基于Normal基椭圆曲线密码芯片的设计

文章设计了一款椭圆曲线密码芯片。实现了GF（2^233）域上normal基椭圆曲线数字签名和认证。并支持椭圆曲线参数的用户配置。在VLSI的实现上，提出了一种新的可支持GF（2^233）域和GF（p）域并行运算的normal基椭圆曲线VLSI架构。其架构解决了以往GF（p）CA算迟后于GF（2^233）域运算的问题，从而提高了整个芯片的运算吞吐率。基于SMIC 0．18μm最坏的工艺，综合后关键路径最大时延3．8ns，面积18mm^2；考虑布局布线的影响，芯片的典型的情况下，每秒可实现8000次签名或4500次认证。     

The Influence and Interpretation of Surface Parameters for Wetting Transitions in Ternary Mixtures

Starting from a microscopic Hamiltonian defined on a semi-infinite cubic lattice, and employing a mean-field approximation, the surface parameters relevant for wetting in confined ternary mixtures are derived. These are found in terms of the microscopic coupling constants, and yield a physical interpretation of their origins. In comparison with the standard expression for the surface free-energy density, several new terms arising from the derivation are identified. The influence of the surface parameters on a predicted unbinding transition in a mixture of oil, water, and amphiphile demonstrate that existing results are robust to the addition of the extra surface terms.     

一种新型递减曲线的简单求法与应用

通过对油气藏产量递减的研究、线性最优化方法的分析研究及文献[1]提出的这种新型递减曲线的研究，提出了解这种方程的一个简单求法。通过现场的实例应用表明：提出的方法具有简单、方便、方法可靠的优点。采用此方法时，产量不以年为单位而是以月为单位进行计算，这将使计算更准确、更合理。     

双基STAP雷达杂波非平稳特性消除的新方法

在单基侧视机载或星载雷达系统中,空时自适应处理是一种成熟可行的慢速移动目标检测方法。在双基雷达系统中,由于杂波的非平稳特性,空时自适应处理无法获得理想的性能。为了揭示双基雷达杂波的非平稳特性,文中推导出了方位-多普勒曲线,研究了一种基于AD曲线配准的杂波非平稳特性的消除方法,给出了此种方法的处理步骤和性能分析。通过仿真发现,该方法处理算法不太复杂且性能优良。