光敏丝室探测器PET的触发判选处理器

介绍了为光敏丝室探测器PET而设计的触发判选处理器（TRIG）的结构和原理，该处理器具有触发判选，计数率损失测量，随机符合事例率测量，探测器分区计数统计以及系统定标等多项功能，由于应用了EPLD技术和流水线作业等技术，实现了TRIG系统的高集成度和高性能 。     

大跨度钢桁架桥的施工与实践

介绍了天生桥一级水电站引水道进水塔大跨度钢桁架桥施工的全过程，包括制作，运输、安装、试验等几个部分，以供类似工程施工参考。     

Biofiltration of toluene in the absence and the presence of ethyl acetate under continuous and intermittent loading

BACKGROUND: Two peat biofilters were used for the removal of toluene from air for one year. One biofilter was fed with pure toluene and the other received 1:1 (by weight) ethyl acetate:toluene mixture. RESULTS: The biofilters were operated under continuous loading: the toluene inlet load (IL) at which 80% removal occurred was 116 g m^?3 h^?1 at 57 s gas residence time. Maximum elimination capacity of 360 g m^?3 h^?1 was obtained at an IL of 745 g m^?3 h^?1. The elimination of toluene was inhibited by the presence of ethyl acetate. Intermittent loading, with pollutants supplied for 16 h/day, 5 days/week, did not significantly affect the removal efficiency (RE). Biomass was fully activated in 2 h after night closures, but 6 h were required to recover RE after weekend closures. Live cell density remained relatively constant over the operational period, while the dead cell fraction increased. Finally, a 15 day starvation period was applied and operation then re‐started. Performance was restored with similar re‐acclimatization period to that after weekend closures, and a reduction in dead cell fraction was observed. CONCLUSION: This study demonstrates the capacity of the system to handle intermittent loading conditions that are common in industrial practices, including long‐term starvation. Copyright © 2008 Society of Chemical Industry     

一种T形高压输电线路故障测距新方法

对T形线路的故障测距，现有方法都是先判断故障支路，再将3端线路等效成2端线路进行测距。但在 T节点附近短路，尤其是经高阻短路时，现有的测距方法由于无法正确判别故障支路而存在一定范围的测距死区。针对上述缺陷，分别假设故障发生在某一支路，由假定正常的2段支路端的电压、电流推算求得 T节点电压和注入假定故障支路的电流，从而分别求得3个故障距离。经证明，求得的3个故障距离有且仅有1个在0和对应支路总长度之间，该距离就是真实的故障距离，故障发生在对应支路上。该方法无需事先判别故障支路即可测距，在 T节点附近经高阻故障时无测距死区。其测距精度理论上不受过渡电阻和故障类型影响，无需故障前数据，且对滤波无高要求。EMTP仿真结果表明该方法正确、有效，测距精度高。     

深基坑土钉支护的有限元分析

本文阐述了土钉支护的发展简史，针对济南济享大厦土钉支护开挖深基坑进行有限元分析并取得较准确的结果，说明在深基坑土钉支护设计中应注意的问题．     

Monitoring herbaceous fuel moisture content with SPOT VEGETATION time-series for fire risk prediction in savanna ecosystems

This paper evaluated the capacity of SPOT VEGETATION time-series to monitor herbaceous fuel moisture content (FMC) in order to improve fire risk assessment in the savanna ecosystem of Kruger National Park in South Africa. In situ herbaceous FMC data were used to assess the Normalized Difference Vegetation Index (NDVI), Normalized Difference Water Index (NDWI), Vegetation Dryness Index (VDI), Improved VDI (IVDI), and Accumulated Relative NDVI Decrement (ARND) during the dry season. The effect of increasing amounts of dead vegetation on the monitoring capacity of derived indices was studied by sampling mixed live and dead FMC. The IVDI was proposed as an improvement of the VDI to monitor herbaceous FMC during the dry season. The IVDI is derived by replacing NDVI with the integrated Relative Vegetation Index (iRVI), as an approximation of yearly herbaceous biomass, when analyzing the 2-dimensional space with NDWI. It was shown that the iRVI offered more information than the NDVI in combination with NDWI to monitor FMC. The VDI and IVDI exhibited a significant relation to FMC with R² of 0.25 and 0.73, respectively. The NDWI, however, correlated best with FMC (R² = 0.75), while the correlation of ARND and FMC was weaker (R² = 0.60) than that found for NDVI, NDWI, and IVDI. The use of in situ herbaceous FMC consequently indicated that NDWI is appropriate as spatio-temporal information source of herbaceous FMC variation which can be used to optimize fire risk and behavior assessment for fire management in savanna ecosystems.     

高炉炉缸内铁水环流与内衬侵蚀

从分析中心焦柱在炉缸内的受力出发，计算了１０００￣５５８０ｍ＾３高炉大喷煤前后中心焦柱在炉缸铁水内的沉入深度，分析了炉缸内铁水环流的产生与炉缸内衬侵的关系，分析表明大喷煤有得利抑制铁水环流对缸内补的冲刷，提出了降低铁水环流对炉缸内衬侵蚀的途径。     

一种基于SOC技术的车载终端优化设计方案

介绍一种基于嵌入式技术的车载监控系统。通过对各种定位技术、无线通信技术研究比较论证,确定以SOC为核心处理器、GPS实现定位、GPRS无线网络为通信方式的解决方案。详细阐述车载终端的软硬件设计,并对系统性能测试结果做介绍。测试证明,该车载终端系统能够胜任车辆定位、跟踪监控等工作,而且系统具备盲区补偿的功能,扩展空间大,易于升级。     

提高电火花加工效率的一种方式

基于离子在电磁场下快速而有规律运动的原理。提出了提高电火花加工效率的一种新策略，一个简单的采用功率场效应晶体管的主电路及它们的逻辑驱动信号也同时在文中提出了和分析。     

有滞后环节的系统的闭环鲁棒辨识方法

提出一种新的针对带滞后环节的任意阶系统的闭环辨识方法。通过“三步法”，实现在闭环条件下的被控制对象的传递函数参数的辨识，所提出方法具有很强的鲁棒性。仿真例子表明该方法的有效性。