Liquid Marble Patchwork on Super-Repellent Surface

Liquid marble (LM) is a droplet that is wrapped by hydrophobic solid particles, which behave as a non-wetting soft solid. Based on these properties, LM can be applied in fluidics and soft device applications. A wide variety of functional particles have been synthesized to form functional LMs. However, the formation of multifunctional LMs by integrating several types of functional particles is challenging. Here, a general strategy for the flexible patterning of functional particles on droplet surfaces in a patchwork-like design is reported. It is shown that LMs can switch their macroscopic behavior between a stable and active state on super-repellent surfaces in situ by jamming/unjamming the surface particles. Active LMs hydrostatically coalesce to form a self-sorted particle pattern on the droplet surface. With the support of LM handling robotics, on-demand cyclic activation–manipulation–coalescence–stabilization protocols by LMs with different sizes and particle types result in the reliable design of multi-faced LMs. Based on this concept, a single bi-functional LM is designed from two mono-functional LMs as an advanced droplet carrier.     

面源红外诱饵对抗红外制导导弹干扰策略研究

面源红外诱饵使用的过程中,合理有效的干扰策略是干扰红外制导导弹的关键,针对这一问题,通过理论分析与仿真模拟相结合得到面源红外诱饵对抗红外制导导弹的干扰策略。首先以红外成像制导导弹为例,介绍红外制导导弹的仿真模型,然后将攻击过程分为锁定前与锁定后,以命中率为评价指标,得到两个阶段下的最佳干扰策略,包括诱饵的最佳释放时机、释放间隔以及载机应采取的机动动作等。     

有线电视系统干扰信号的产生及排除

通过对有线电视系统干扰信号产生原因的理论分析，提出在实际操作中的解决方案，以期达到使有线电视系统信号的输出更稳定、电视画面更清晰的目的。     

The validity of psychophysiological detection of information with the Guilty Knowledge Test: A meta-analytic review.

The authors performed a meta-analysis based on 169 conditions, gathered from 80 laboratory studies, to estimate the validity of the Guilty Knowledge Test (GKT) with the electrodermal measure. The over-all average effect size was 1.55, but there were considerable variations among studies. In particular, mock-crime studies produced the highest average effect size (2.09). Three additional moderators, were identified: Motivational instructions, deceptive ("no") verbal responses, and the use of at least 5 questions were associated with enhanced validity. Finally, a set of 10 studies that best approximated applications of the GKT under optimal conditions produced an average effect size of 3.12. The authors discuss factors that might limit the generalizability of these results and recommend further research of the GKT in realistic setups. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

无线电引信被干扰率及抗干扰率

本文从无线电引信相对杀伤比率出发，引伸出引信被干扰率及抗干扰率的定义及计算公式。     

雷达仿真系统中电磁干扰环境的仿真设计和实施

雷达仿真系统是为检测雷达设备的抗干扰能力以及在各种电磁环境下的工作性能而设计的，包括有源干扰和无源干扰的模拟仿真。本文阐述了无源干扰即杂波的散射模型和仿真过程；从同步脉冲干扰的基本原理出发，阐明在雷达工作环境仿真系统中距离拖引、速度拖引、虚假目标等同步脉冲有源干扰的设计和实施过程；并针对工作在搜索和跟踪交替模式下的相控阵雷达提出自适应综合干扰方式；最后分析并总结了系统仿真时为真实、有效地模拟电磁干扰环境应注意的关键问题。     

几种航空有源电子干扰装备的比较

本文对远距离支援干扰飞机、随队支援干扰飞机、机载自卫电子对抗系统以及最近国外正在大力发展的分布式电子干扰系统等几种航空有源电子干扰装备的作战对象、战术应用、功能、使用局限性等特点进行了比较 ,探讨了综合发展和运用这几型装备的重要意义     

PD雷达欺骗干扰方法浅析

概要介绍了PD雷达的抗干扰性能及其特点．并主要对PD雷达的欺骗干扰方法进行了一定的讨论。     

激光对抗技术发展动态

激光对抗主要包括激光侦察告警、激光无源干扰和有源干扰，以及激光防护几方面。本文概述了激光对抗技术的发展。     

Φ90mm圆盘延伸机前卡钢分析

探讨了造成Φ90mm圆盘延伸机前卡钢的原因,分析了轧件轧制过程中的第一、第二次咬入的受力情况,提出了预防前卡钢的措施。该措施实施后,基本消除了前卡钢现象。