声波测井换能器激发响应实验研究

声波测井换能器的激发响应由换能器振动时所表现出来的动态阻抗和激发电路参数决定。而换能器的动态（阻抗）参数随压电晶体及其装配方式（力学边界条件）改变。为了测量换能器动态参数的影响，采用声波测井仪器常用的压电晶体和升压变压器，通过改变激发脉冲宽度和直流电压进行了实验，结果发现：在换能器两端的瞬态响应中，一共有三个二阶网络响应，分别对应于不同的频率。最低的一个影响声波测井波形的基线、与换能器主频接近的一个决定激发效率以及电路与压电晶体之间的匹配关系，是激发电路设计中比较关键的，其参数可以通过导纳圆测量仪器得到。     

有互感和电源的电容耦合电路的量子涨落

通过正则变换和幺正变换的方法研究了有互感和电源存在的情况下的介观电容耦合电路的量子涨落。结果表明电荷和电流的量子涨落与电源无关。当电路元件确定时，如果L1／L2的值很大或很小，耦合对涨落的影响很大。互感从有到无的过程中，回路1中电流的涨落和回路中2中电荷的涨落有明显的变化。换句话说，互感的有无对涨落的大小起着举足轻重的作用。     

高功率脉冲水中放电的应用及其发展

首先介绍了高功率脉冲水下放电的机理，然后综合论述了其应用和研究的状况，从较为成熟的脉冲水处理技术到医疗领域的ESWL应用技术，以及在脉冲电场食品杀菌和水下目标探测方面的最新发展和研究，最后指出了高功率脉冲电技术应用前景以及进行更系统和深入研究的必要性。     

超宽带极窄脉冲设计与产生

超宽带(UWB)技术是以持续时间极短的脉冲作为传输载体进行数据通信的无线新技术。基于BJT雪崩特性,本文采用并行同时触发的工作方式,设计并产生了高重复速率的UWB脉冲电路发生器,极大地减少了时延,缩短了上升时间,提高了脉冲的幅度,并从等效电路法的观点分析计算了脉冲的特性参数,理论结果与实测结果具有较好的一致性。     

Generation of Technology-Independent Retargetable Analog Blocks

This paper introduces a complete methodology for retargeting of analog cells to different sets of specifications. This methodology is technology-independent, thus allowing the migration, from one technology to another, of the circuit under retargeting. Careful integration of the device sizing and layout generation tasks via the incorporation of layout constraints during the sizing process allows to generate fully functional designs in a few minutes. The methodology is illustrated via the retargeting of a fully-differential Miller-compensated two-stage operational amplifier for a new set of specifications and two different technological processes.An erratum to this article can be found at     

基于IP核复用技术的SoC设计

概述了国内外IP产业的发展情况,论述了我国发展IP核复用技术SoC设计的可能性和必要性,指出我国急需发展的关键芯片及IP核种类.     

Observer design for autonomous discrete-time nonlinear systems

We obtain a necessary and sufficient condition for a discrete-time nonlinear system to be locally state equivalent to the nonlinear observer form. The result looks similar to the continuous counterpart except for the fact that Ad-operation is utilized instead of ad-operation.     

煤炭码头带式输送机控制系统

介绍煤炭码头带式输送机联锁控制系统设计的一种方法，详细阐述了整个系统的工艺流程、启动方式以及控制原理等。这种方法可以实现带式输送机远程中控室控制，也可进行就地带式输送机机侧控制。     

Evaluation of passive microwave snow water equivalent algorithms in the depth hoar-dominated snowpack of the Kuparuk River Watershed, Alaska, USA

This research investigates the utility of passive microwave remote sensing instruments to accurately determine snow water equivalent (SWE) over large spatial extents. Three existing Special Sensor Microwave Imager (SSM/I) snow water equivalent algorithms produced by Chang, Tait and Goodison were evaluated for their ability to determine snow water equivalent in a snowpack containing substantial depth hoar, large faceted snow crystals. The Kuparuk River Watershed (8140 km²) test site on the North Slope of Alaska was chosen for its snowpack containing a think depth hoar layer and long history of ground truth data. A new regional snow water equivalent algorithm was developed to determine if it could produce better results than the existing algorithms in an area known to contain significant depth hoar. The four algorithms were tested to see how well they could determine snow water equivalent: (1) on a per pixel basis, (2) across swath-averaged spatial bands of approximately 850 km², and (3) on a watershed scale. The algorithms were evaluated to see if they captured the annual spatial distribution in snow water equivalent over the watershed. Results show that the algorithms developed by Chang and from this research are generally within 3 cm of the spatially averaged snow water equivalents over the entire watershed. The algorithms produced by Chang, Tait, and in this research were able to predict the basin-wide ground measured snow water equivalent value within a percent error range from −32.4% to 24.4% in the years with a typical snowpack. None of the algorithms produce accurate results on a pixel-by-pixel scale, with errors ranging from −26% to 308%.