高发射率节能涂料及其应用

讨论了高发射率涂料节能的条件，了一种在1000℃仍保持高发射率的优质涂料，并解决了涂料与金属基体的粘结工艺，用此涂料制成增强辐射电阻带和复合炉衬，得到的新炉比旧炉节能20－40％。     

低发射率材料红外法向发射率谱测量方法的研究

采用热管技术研制了材料发射率谱的专用测量附件;利用双温测量技术,在P-E983型红外分光光度计及3600型数据站上进行了较低温度下低发射率材料红外法向发射率谱测量方法的研究.实测了几种材料的发射率谱;讨论了影响测量误差的诸因素.     

Experimental investigation of the normal spectral emissivity and other thermophysical properties of pulse-heated Ni-Ti and Au-Ni alloys into the liquid phase

1. Introduction Metal working industry needs accurate thermo- physical properties of liquid metals and alloys as input data for different simulation routines to im- prove the performance of their products. Within this paper we continue the systematic investigation of the dependence of emissivity of binary alloys on the relative concentration of the constituent elements (for a previous paper see [1]). 2. Experimental method A fast ohmic pulse heating technique is applied to heat metallic wire-s…     

海表面盐度卫星微波遥感研究进展

海表面盐度SSS(Sea Surface Salinity)是研究大洋环流和海洋对全球气候影响的重要参量、是决定海水基本性质的重要因素之一。卫星微波遥感可以满足盐度研究过程中大范围、连续观测的需要,国际上统一的认识是选择频率为1.413 GHz的L波段作为盐度遥感的首选波段。目前,国外发展的海面盐度微波遥感反演算法主要有两种:基于海表发射率估算海表盐度的算法和基于贝叶斯定理提出的反演算法。影响盐度反演精度的因素主要有太空辐射、电离层法拉第旋转、大气、海面粗糙度等。其中,海面粗糙度对盐度反演影响很大,海面粗糙度处理模型可以分为3大类:理论算法(间接发射率模型、直接发射率模型)、经验算法、半经验半理论算法(Hollinger 半经验模型、WISE半经验模型、Gabarró模型)。SMOS卫星和Aquarius/SAC\|D卫星的成功发射,将海表面盐度遥感的反演精度控制在0.2 psu以内,通过改进反演算法,有望得到更高的反演精度。     

A new microsecond pulse-heating system to investigate thermophysical properties of solid and liquid metals

A new discharge system for resistive self-heating has been constructed for the measurement of accurate thermophysical properties. A constant-current pulse is used to heat metals over a time interval of 50 to 100 s, reaching temperatures up to the boiling point. New techniques have been developed to obtain sound speeds in the pulse-heated sample, emissivities, and vapor pressure. A new pyrometer allows the extension of the measured temperature range down to the melting point of copper.     

La3+ 掺杂对 CeO2 红外发射性能的影响研究

随着飞行器飞行速度和发动机燃烧室温度的提高, 金属类隐身涂层材料已无法满足环境使用要求。 CeO2 具有较高熔点、 抗氧化、 较低红外发射率等特点, 被认为是红外隐身应用的候选材料, 但其发射率仍无法满足 高温红外隐身需求。 本文通过固相反应法对 CeO2 进行 La3+ 掺杂改性, 研究掺杂量对 CeO2 粉体红外发射性能的 影响规律。 结果表明, 随着掺杂量从 10 mol% 增加到 30 mol%, 粉体在 3~6 μm 波段的发射率不断降低, 其中 Ce0.7La0.3O2 的红外发射率仅为 0.1。     

前置反射式发射率在线测量装置的研制

针对目前军事、航空航天、工农业等领域对在线发射率测量的迫切要求,设计了新型的前置反射式发射率在线测量装置.采用立体角比例划分法构建了前置反射器模型,设计了光纤式多光谱仪作为光谱接收装置.根据测量装置的结构特点,建立了在线发射率测量的理论模型.测量了700~1100℃温度范围内的不锈钢氧化层发射率,结果符合金属氧化物发射率的一般规律.实验结果证明了此在线发射率测量装置可满足一定条件下的发射率测量需要.     

高透明低发射率ITO薄膜的制备及其光电性能研究

目的研究磁控溅射工艺对ITO薄膜光电性能的影响,为制备高性能ITO薄膜提供数据和理论支撑。方法采用磁控溅射在PET基材上制备ITO薄膜,利用扫描电镜、X射线衍射仪、分光光度计、四探针、红外发射率测仪、Hall效应测试系统等,分析工艺参数对ITO薄膜光电性能的影响。结果随着氧气流量的增加,ITO薄膜在可见光区的透过率先增加,然后变缓,薄膜方块电阻先降低后升高;随着工作气压的增加,ITO薄膜的可见光透过率增加,薄膜方块电阻先下降后上升,电阻率先变小再增大,载流子浓度先增大后减小,红外发射率先减小后增大,晶体结构逐渐由晶态转变为非晶态;随着氩氧比的降低,薄膜红外发射率先降低,然后缓慢升高;随溅射时间的增加,薄膜的厚度逐渐增大,方块电阻、红外发射率和可见光透过率迅速下降,晶体结构逐渐由非晶结构转变为晶体结构。综合对比研究发现,当氧气流量为0.6 mL/min、工作气压为0.4 Pa、氩氧比为19.8∶0.2、溅射时间为80 min时,可获得综合性能优异的ITO薄膜,其可见光透过率大于80%,在8～14μm红外波段的辐射率小于0.2。结论磁控溅射工艺参数是决定薄膜综合质量的重要因素,通过严格控制工艺参数,可获得透明性高、发射率低的ITO薄膜。     

New refinements and validation of the MODIS Land-Surface Temperature/Emissivity products

This paper discusses the lessons learned from analysis of the Moderate Resolution Imaging Spectroradiometer (MODIS) Land-Surface Temperature/Emissivity (LST) products in the current (V4) and previous versions, and presents eight new refinements for V5 product generation executive code (PGE16) and the test results with real Terra and Aqua MODIS data. The major refinements include considering surface elevation when using the MODIS cloudmask product, removal of temporal averaging in the 1 km daily level-3 LST product, removal of cloud-contaminated LSTs in level-3 LST products, and the refinements for the day/night LST algorithm. These refinements significantly improved the spatial coverage of LSTs, especially in highland regions, and the accuracy and stability of the MODIS LST products. Comparisons between V5 LSTs and in-situ values in 47 clear-sky cases (in the LST range from − 10 °C to 58 °C and atmospheric column water vapor range from 0.4 to 3.5 cm) indicate that the accuracy of the MODIS LST product is better than 1 K in most cases (39 out of 47) and the root of mean squares of differences is less than 0.7 K for all 47 cases or 0.5 K for all but the 8 cases apparently with heavy aerosol loadings. Emissivities retrieved by the day/night algorithm are well compared to the surface emissivity spectra measured by a sun-shadow method in two field campaigns. The time series of V5 MODIS LST product over two sites (Lake Tahoe in California and Namco lake in Tibet) in 2003 are evaluated, showing that the quantity and quality of MODIS LST products depend on clear-sky conditions because of the inherent limitation of the thermal infrared remote sensing.